Effect of Co Addition on the Creep Rupture Properties of 9Cr-1.8W-xCo Weld Metals
Source abstract
Abstract
In this study, the effect of Co addition on the microstructure and creep rupture properties of 9Cr-1.8W-xCo weld metals is investigated. Herein, stick electrodes were fabricated for producing weld metals with 0.5, 1.0, and 1.5 wt pct Co and without Co, which were then processed by post-welding heat treatment at 760 °C for 4 hours. The microstructures of weld metals, including the prior austenite grain size, tempered martensite lath size, delta ferrite content, and precipitate quantity and size, were characterized via optical microscopy, scanning and transmission electron microscopy, and electron backscattered diffraction. The precipitates were identified by X-ray diffraction after they were extracted from the matrix. The Curie temperature was determined via differential scanning calorimetry, which allowed the evaluation of diffusion rate as a function of Co content. The weld metals were mechanically characterized by creep rupture tests conducted at 675 °C under 150 MPa and by hardness and tensile tests conducted at room temperature as well as Charpy impact tests conducted at various temperatures from − 40 °C to 60 °C. The results obtained herein suggest that the addition of Co significantly increases the creep rupture time of 9Cr-1.8W steel (by approximately 20 times than that of Co-free steel), reduces the prior austenite grain size and tempered martensite lath size, hinders the formation of detrimental delta ferrite, and promotes the formation of precipitates with slightly larger size. Herein, the highest creep resistance from the viewpoint of creep rupture time was obtained for 9Cr-1.8W weld metal with 1.5 wt pct Co. Furthermore, the results suggest that a finer and more stable substructure is required for improving the creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Z. Zhang, G. Holloway and A. Marshall, Ommi 2009, vol. 6, pp. 1-14.
2. H.K.D.H. Bhadeshia, ISIJ International 2000, vol. 41, pp. 626-640.10.2355/isijinternational.41.626 ↗
3. M. Shibuya, Y. Toda, K. Sawada, H. Kushima and K. Kimura, Materials Science and Engineering: A 2011, vol. 528, pp. 5387-5393.10.1016/j.msea.2011.03.088 ↗
4. F. Masuyama, ISIJ international 2001, vol. 41, pp. 612-625.10.2355/isijinternational.41.612 ↗
5. J. Onoro, Journal of Materials Processing Technology 2006, vol. 180, pp. 137-142.10.1016/j.jmatprotec.2006.05.014 ↗
6. S. Sone, Report No. 72, Nippon Steel 1997.
7. R.L. Klueh, International Materials Reviews 2005, vol. 50, pp. 287-310.10.1179/174328005X41140 ↗
8. R.L. Klueh and D.R. Harries, ASTM West Conshohocken, PA, 2001, p. 31,48,71.
9. J.C. Vaillant, B. Vandenberghe, B. Hahn, H. Heuser and C. Jochum, International Journal of Pressure Vessels and Piping 2008, vol. 85, pp. 38-46.10.1016/j.ijpvp.2007.06.011 ↗
10. J. Hilkes and V. Gross, Bulletin of the Institute of Welding 2013, vol. 57, pp. 11-22.
11. W. Yan, W. Wang, Y-Y. Shan and K. Yang, Frontiers of Materials Science 2013, vol. 7, pp. 1-27.10.1007/s11706-013-0189-5 ↗
12. B. Arivazhagan, S. Sundaresan and M. Kamaraj, Materials Letters 2008, vol. 62, pp. 2817-2820.10.1016/j.matlet.2008.01.054 ↗
13. L. Helis, Y. Toda, T. Hara, H. Miyazaki and F. Abe, Materials Science and Engineering: A 2009, vol. 510-511, pp. 88-94.10.1016/j.msea.2008.04.131 ↗
14. G. Chakraborty, J.G. Kumar, P. Vasantharaja, C.R. Das, S.K. Albert and K. Laha, Journal of Materials Engineering and Performance 2019, vol. 28, pp. 876-885.10.1007/s11665-019-3862-8 ↗
15. A. Dhooge, S. Huysmans, B. Vandenberghe and J. Vekleman, In WELDS, 2005.
16. P. Mayr, In Faculty of Mechanical Engineering, Graz University of Technology: Austria: Ph.D. Thesis, 2007, p. 198.
17. K. Yamada, M. Igarashi, S. Muneki and F. Abe, ISIJ international 2003, vol. 43, pp. 1438-1443.10.2355/isijinternational.43.1438 ↗
18. A. Barnes and D. Abson, In 2nd International Conference Intergrity of High Temperature Welds, London, 2003.
19. A. Kipelova, M. Odnobokova, A. Belyakov and R. Kaibyshev, Metallurgical and Materials Transactions A 2012, vol. 44, pp. 577-583.10.1007/s11661-012-1390-3 ↗
20. Å. Gustafson and J. Ågren, ISIJ international 2001, vol. 41, pp. 356-360.10.2355/isijinternational.41.356 ↗
21. R.K. Guseinov and V.N. Zikeev, Met Sci Heat Treat 1974, vol. 16, pp. 49-55.10.1007/BF00679202 ↗
22. A.P. Gulyaev, V.N. Zikeev and R.K. Guseinov, Met Sci Heat Treat 1975, vol. 17, pp. 95-103.10.1007/BF00679157 ↗
23. B.P. Sharov and V.N. Zikeev, Met Sci Heat Treat 1977, vol. 19, pp. 265-268.10.1007/BF00700806 ↗
24. X. Wang, L-F. Zhan, Q-G. Pan, Z-J Liu, H. Liu and Y-S Tao, J. Zhejiang Univ. Sci. A 2010, vol. 11, pp. 756-760.10.1631/jzus.A1000215 ↗
25. K. Maruyama, K. Sawada and J-I Koike, ISIJ international 2001, vol. 41, pp. 641-653.10.2355/isijinternational.41.641 ↗
26. V. Dudko, A. Belyakov, D. Molodov and R. Kaibyshev, Metallurgical and Materials Transactions A 2013, vol. 44, pp. 162-172.10.1007/s11661-011-0899-1 ↗
27. S. Wang, L. Chang, D. Lin, X. Chen and X. Hui, Metallurgical and Materials Transactions A 2014, vol. 45, pp. 4371-4385.10.1007/s11661-014-2411-1 ↗
28. I. Velkavrh, F. Kafexhiu, S. Klien, A. Diem and B. Podgornik, Metallurgical and Materials Transactions A 2017, vol. 48, pp. 109-125.10.1007/s11661-016-3830-y ↗
29. R.N. Hajra, A.K. Rai, H.P. Tripathy, S. Raju and S. Saroja, Journal of Alloys and Compounds 2016, vol. 689, pp. 829-836.10.1016/j.jallcom.2016.08.055 ↗
30. A. Výrostková, V. Homolová, J. Pecha and M. Svoboda, Materials Science and Engineering: A 2008, vol. 480, pp. 289-298.10.1016/j.msea.2007.07.036 ↗
31. C. Pandey, M.M. Mahapatra, P. Kumar, N. Saini, J.G. Thakre, R.S. Vidyarthy and H.K. Narang, Archives of Civil and Mechanical Engineering 2018, vol. 18, pp. 713-722.10.1016/j.acme.2017.12.002 ↗
32. J. Zhang, B. Sh. Du, X.M. Li, G.L. Qin and Y. Zou, Kovove mater 2017, vol. 55, pp. 115-121.10.4149/km_2017_2_115 ↗
33. F. Peñalba, X. Gómez-Mitxelena, J.A. Jıménez, M. Carsí and O.A. Ruano, ISIJ International 2016, vol. 56, pp. 1662-1667.10.2355/isijinternational.ISIJINT-2016-097 ↗
34. S. Zhang, T. Melfi and B.K. Narayanan, Science and Technology of Welding and Joining 2016, vol. 21, pp. 147-156.10.1179/1362171815Y.0000000076 ↗
35. K. Guguloth and N. Roy, Materials Characterization 2018, vol. 146, pp. 279-298.10.1016/j.matchar.2018.10.011 ↗
36. W.R. Tyson, B. Faucher, M. Shehata and Y.S. Hong, In Mechanical Behaviour of Materials V, Elsevier, 1988), pp. 357–64.10.1016/B978-0-08-034912-1.50050-3 ↗
37. A. Kostka, K-G. Tak, R.J. Hellmig, Y. Estrin and G. Eggeler, Acta Materialia 2007, vol. 55, pp. 539-550.10.1016/j.actamat.2006.08.046 ↗
38. J.G. Back and K.B. Surreddi, Materials Characterization 2019, vol. 157, p. 109926.10.1016/j.matchar.2019.109926 ↗
39. L.Zeng, M. Xu, X. Ma, Y. Huang, S. Zhang, Q. Hu and J. Li, ISIJ International 2014, vol. 54, pp. 2302-2308.10.2355/isijinternational.54.2302 ↗
40. P. Patriarca, S.D. Harkness, J.M. Duke and L.R. Cooper, Nuclear Technology 1976, vol. 28, pp. 516-536.
41. F. Kabakci, In Metallurgy and Materials Engineering, Selçuk University: Ph.D. thesis Turkey, 2017.
42. B. Arivazhagan and M. Vasudevan, Journal of Manufacturing Processes 2014, vol. 16, pp. 305-311.10.1016/j.jmapro.2014.01.003 ↗
43. A. Magnee, J.M. Drapier, D. Coutsouradis, L. Habrakan and J. Dumont: Cobalt-containing high-strength steels : a critical review of the physical metallurgy of cobalt-containing high-strenght steels, and a survey of their processing, properties and uses. Brussels: Centre d’ information du cobalt, 1974.
44. L. Havelka, P. Mohyla and J. Vontorová, In Metal 2015 : 24th Conference on Metallurgy and Materials, Tanger: Czech Republic.
45. S.S. Wang, D.L. Peng, L. Chang and X.D. Hui, Materials & Design 2013, vol. 50, pp. 174-180.10.1016/j.matdes.2013.01.072 ↗
46. H.G. Armaki, R. Chen, K. Maruyama and M. Igarashi, Metallurgical and Materials Transactions A 2011, vol. 42, pp. 3084-3094.10.1007/s11661-011-0726-8 ↗
47. T. Shrestha, M. Basirat, I. Charit, G.P. Potirniche, K.K. Rink and U. Sahaym, Journal of nuclear materials 2012, vol. 423, pp. 110-119.10.1016/j.jnucmat.2012.01.005 ↗
48. W. Yan, W. Wang, Y. Shan, K. Yang and W. Sha: 9-12Cr heat-resistant steels. Springer, Switzerland 2015, pp. 28.10.1007/978-3-319-14839-7 ↗