journal article·2020-10

High Temperature Oxidation Study of Nano-Y2O3 Dispersed Ferritic Alloys Synthesized by Mechanical Alloying and Sintering

A. Meharwal, M. Kumar, S. K. Karak, J. Dutta Majumdar, I. Manna

Publisher page

Abstract

This study concerns mechanism and kinetics of isothermal oxidation of four Fe-Cr-Al-Ti ferritic alloys in the range 700 °C to 900 °C for up to 50 hours in air. These four alloys with nominal compositions of 83.0Fe-13.5Cr-2.0Al-0.5Ti (alloy A), 79.0Fe-17.5Cr-2.0Al-0.5Ti (alloy B), 75.0Fe-21.5Cr-2.0Al-0.5Ti (alloy C), and 71.0Fe-25.5Cr-2.0Al-0.5Ti (alloy D) each with 1.0 wt pct nano-Y2O3 dispersion were synthesized by mechanical alloying and sintering at 1000 °C by hot isostatic pressing, high pressure sintering, hydrostatic extrusion and pulse plasma sintering techniques. A detailed characterization of the phase aggregate, microstructure and micro-composition of the oxide scale was carried out by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy, respectively. Oxidation kinetics appear to follow a parabolic rate with an activation energy of 135 to 234 kJ/mol, which depend on alloy composition (i.e., Cr content). Oxidation mostly occurred by counter-ionic diffusion of oxygen from air to the interior and cations (Cr+3 or Fe+3) from the bulk toward the surface. Alloy D sintered by hot isostatic pressing offered the highest resistance to oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Advanced materials and composites · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. R. Viswanathan and W. Bakker, 2001, Journal of Materials Engineering and Performance, 2001, vol. 10(1), pp. 81-95.10.1361/105994901770345394 ↗
2. W. Yan, W. Wang, Y.Y. Shan, and K. Yang, Front. Mater. Sci. 2013, vol. 7(1), pp. 1–27.
3. K. Asano, V. Kohno, A. Kohyama, T. Suzuki, and H. Kusanagi, Journal of Nuclear Materials, 1988, vol.155, pp. 928-934.10.1016/0022-3115(88)90443-6 ↗
4. I. Hilger, X. Boulnat, J. Hoffmann, C. Testani, F. Bergner, Y. De Carlan, F. Ferraro, A. Ulbricht, Journal of Nuclear Materials, 2016, vol. 472, pp. 206-214.10.1016/j.jnucmat.2015.09.036 ↗
5. R.L. Klueh, J.P. Shingledecker, R.W. Swindeman, D.T. Hoelzer, Journal of Nuclear Materials, 2005, vol. 341, pp. 103–114.10.1016/j.jnucmat.2005.01.017 ↗
6. S. Ohtuska, S. Ukai, M. Fujiwara, T. Kaito, and T. Narita, Mater. Trans. A, 2005, vol. 46 (3), pp. 487-492.
7. S. Ukai, S. Mizuta, T. Yoshitake, T. Okuda, M. Fujiwara, S. Hagi, and T. Kobayashi, Journal of Nuclear Materials, 2000, vol. 283–87, pp.702-706.10.1016/S0022-3115(00)00114-8 ↗
8. M.K. Miller, D.T. Hoelzer, E.A. Kenik, and K.F. Russell, Intermetallics, 2005, vol. 13, pp. 387-392.10.1016/j.intermet.2004.07.036 ↗
9. R.A. Versaci, D. Clemens, W.J. Quadakkers, and R. Hussey, Sloid State Ionics 1993, vol. 59, pp. 235-242.10.1016/0167-2738(93)90056-9 ↗
10. T.A. Ramanarayanan, R. Ayer, R. Petkovic-Luton and D.P. Leta, High Temp. High Press. 1988, vol. 20, pp. 277-292.
11. S.K. Karak, C.S. Vishnu, Z. Witczak, W. Lojkowski, J. D. Majumdar and I. Manna, Wear, 2010, vol. 270, pp. 5-11.10.1016/j.wear.2010.08.021 ↗
12. S.K. Karak, T. Chudoba, Z. Witczak, W. Lojkowski and I. Manna, Mater. Sci.Engg A. 2011, vol. 528, pp. 7475-748310.1016/j.msea.2011.06.039 ↗
13. S.K. Karak, J. D. Majumdar, Z. Witczak, W. Lojkowski, L. Ciupinski, K.J. Kurzydlowski and I. Manna, Metall. Mater. Trans., 2013, vol. 44A, pp. 2884–2894.10.1007/s11661-013-1627-9 ↗
14. S.K. Karak, J.D. Majumdar, Z. Witczak, W. Lojkowski, I. Manna (2013) Mater. Sci. Eng. A vol. 580, pp. 231–241.10.1016/j.msea.2013.04.085 ↗
15. S.K. Karak, J. D. Majumdar, W. Lojkowski, A. Michalski, L. Ciupinski, K.J. Kurzydlowski and I.Manna, Philos.Mag. A, 2012, vol. 92, pp.516-534.10.1080/14786435.2011.619508 ↗
16. M. Matijasevic and A. Almazouzi, Journal of Nuclear Materials, 2008, vol. 377, pp. 147-154.10.1016/j.jnucmat.2008.02.061 ↗
17. R. Soundberg, Chemometrics and Intelligent Laboratory System, 1998, vol. 41, pp. 249-252.10.1016/S0169-7439(98)00052-5 ↗
18. M. Han, S. Peng, Z. Wang, Z. Yang, and X. Chen, Journal of Power Sources, 2007, vol. 164, pp. 278-283.10.1016/j.jpowsour.2006.10.039 ↗
19. Y. Mishin, C. Herzig, J. Bernardini, and W. Gust, Inter. Mater. Rev. 1997, vol. 42, pp. 155-178.10.1179/imr.1997.42.4.155 ↗
20. L.G. Harrison, Trans. Faraday Soc. 1961, vol. 57, pp. 1191-1199.10.1039/tf9615701191 ↗
21. B. Chattopadhyay and G. C. Wood, Oxid. Met, 1970, vol. 2, pp. 373-398.10.1007/BF00604477 ↗
22. JH Kim, KM Kim, TS Byun, DW Lee, CH Park, Thermochimica Acta, 2014, vol. 579, pp. 1–8.10.1016/j.tca.2014.01.010 ↗
23. Y. Chen, K. Sridharan, T. Allen, and S. Ukai, Journal of Nuclear Materials, 2006, vol. 359, pp. 50-58.10.1016/j.jnucmat.2006.07.021 ↗
24. Chan-Gyu Lee, Yoshiaki Iijima, Tatsuhiko Hiratani, and Ken-ichi Hirano, Mater. Trans. JIM, 1990, vol. 31(4), pp. 255-261.10.2320/matertrans1989.31.255 ↗
25. N. H. Oono, S. Ukai, K. Tominaga, N. Ebisawa, and K. Tomura, J Mater. Sci., 2019, vol. 54, pp. 8786–8799.10.1007/s10853-019-03516-6 ↗
26. R.L. Klueh, P.J. Maziasz, I.S. Kim, L. Heatherly, D.T. Hoelzer, N. Hashimoto, E.A. Kenik, and K. Miyahara, Journal of Nuclear Materials, 2002, vol. 307–311, pp. 773–777.10.1016/S0022-3115(02)01046-2 ↗
27. H. Masuda, H. Tobe, E. Sato, Y. Sugino, and S. Ukai, Acta Mater., 2017, vol. 132, pp. 245-254.10.1016/j.actamat.2017.04.047 ↗