Modeling Solid-State Phase Transformations of 13Cr-4Ni Steels in Welding Heat-Affected Zone
Source abstract
Abstract
Abstract Fatigue damage is commonly encountered by operators of Francis type hydraulic turbine runners made of 13Cr-4Ni soft martensitic stainless steel. These large and complex welded casting assemblies are subjected to fatigue crack initiation and growth in the vicinity of their welded regions. It is well known that fatigue behavior is influenced by residual stresses and the microstructure. By including solid-state phase transformation models in welding simulations, phase distribution can be evaluated along with their respective volumetric change and their effect on residual stresses. Thus, it enables the assessment of welding process on fatigue crack behavior by numerical methods. This paper focuses on modeling solid-state phase transformations of 13Cr-4Ni soft martensitic stainless steel, used for manufacturing hydraulic turbine runners, occurring upon welding. It proposes to determine the material parameters of the models for both the austenitic and the martensitic transformation by nonisothermal dilatometry tests. The experiments are conducted in a quenching dilatometer with applied thermal conditions as experienced in the heat-affected zone of homogeneous welds. The activation energy and the kinetic parameters of the austenitic transformation from fully martensitic state are measured from the experimental results. The martensitic transformation modeling from a fully austenitic domain is also presented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Y. Iwabuchi and S. Sawada: Stainless Steel Castings, ASTM STP756, ASTM Spec. Tech. Publ., V.G. Behal and A.S. Melilli, Eds., Philadelphia, PA, 1982, pp. 332-35410.1520/STP28449S ↗
2. W. Gysel, E. Gerber and A. Trautwein: Stainless Steel Castings, ASTM STP756, ASTM Spec. Tech. Publ., V.G. Behal and A.S. Melilli, Eds., Philadelphia, PA, , pp. 403-43510.1520/STP28454S ↗
3. J. Lanteigne, S. Lalonde, C. Baillargeon, and J.-L. Fihey: Report No. IREQ-98-209C, Institut de recherche d’Hydro-Québec, Varennes, Qc, 1998
4. A. Trudel, M. Sabourin, M. Lévesque and M. Brochu: Int. J. Fatigue, 2014, vol. 66, pp. 39-4610.1016/j.ijfatigue.2014.03.006 ↗
5. Y. Z. Itoh, S. Suruga, H. Kashiwaya: Eng. Fract. Mech., 1989, vol. 33, pp. 397-40710.1016/0013-7944(89)90089-1 ↗
6. M. Beghini, L. Bertini: Eng. Fract. Mech., 1990, vol. 36, pp. 379-38710.1016/0013-7944(90)90285-O ↗
7. D. Paquet, J. Lanteigne, M. Bernard and C. Baillargeon: Int. J. Fatigue, 2014, vol. 59, pp. 90-10110.1016/j.ijfatigue.2013.09.011 ↗
8. P.-A. Deschênes, J. Lanteigne, Y. Verreman, D. Paquet, J.-B. Lévesque and M. Brochu: Int. J. Fatigue, 2017, vol. 100, pp. 444-45210.1016/j.ijfatigue.2017.01.031 ↗
9. M. Côté: Étude des Cinétiques de transformation de phase d’un acier inoxydable martensitique 13%Cr-4%Ni, École de technologie supérieure, Montréal, Ca, 2007, pp. 51-86
10. J. B. Leblond, J. Devaux: Acta metall., 1984, vol. 32, pp. 137-14610.1016/0001-6160(84)90211-6 ↗
11. W. A. Johnson and R. F. Mehl: Trans. AIME, 1939, Vol. 135, pp. 416-442
12. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103-11210.1063/1.1750380 ↗
13. A.N. Kolmogorov: Izv. Akad. Nauk SSR Ser. Fiz. Mat. Nauk., 1937, pp. 355–60
14. K. Barmak: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2711-77510.1007/s11661-010-0421-1 ↗
15. W. Piekarska, M. Kubiak, A. Bokota: Comput. Mater. Sci., 2011, vol. 56, pp. 409-421
16. W. Zhang, J.W. Elmer, and T. DebRoy: Mater. Sci. Eng. A, 2002, vol. 333, pp. 320-33510.1016/S0921-5093(01)01857-3 ↗
17. W. Zhang, J. W. Elmer and T. DebRoy: Scr. Mater., 2002, vol. 46, pp. 753-5710.1016/S1359-6462(02)00040-4 ↗
18. J.W. Elmer, T.A. Palmer, W. Zhang, B. Wood and T. DebRoy: Acta Mater., 2003, vol. 51, pp. 3333-4910.1016/S1359-6454(03)00049-1 ↗
19. J.W. Christian: The Theory of Transformations in metals and Alloys, 3rd ed., Pergamon, Oxford, UK, 2002, p.961-6910.1016/B978-008044019-4/50026-X ↗
20. D. Thibault, P. Bocher and M. Thomas: J. Mater. Process. Technol., 2009, vol. 209, pp. 2195-20210.1016/j.jmatprotec.2008.05.005 ↗
21. D. Thibault, P. Bocher, M. Thomas, M. Gharghouri and M. Côté: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6205-1010.1016/j.msea.2010.06.035 ↗
22. S. Godin, E. Boudreault, J.-B. Lévesque and B. Hazel: Mater. Sci. Technol., 2013, vol. 2, pp. 754-765
23. S. Sarafan, J.-B. Lévesque, P. Wanjara, J. Gholipour and H. Champliaud: Sci. Technol. Weld. Joining, 2016, vol. 21, pp. 473-47810.1080/13621718.2015.1132127 ↗
24. K. Babu and T.S. PrasannaKumar: Metall. Mater. Trans. B, 2014, vol. 45B, pp. 1530-54410.1007/s11663-014-0069-0 ↗
25. P. Ferro, H. Porzner, A. Tiziani and F. Bonollo: Modell. Simul. Mater. Sci. Eng., 2006, vol. 14, pp. 117-13610.1088/0965-0393/14/2/001 ↗
26. P. Ferro, H. Porzner, A. Tiziani and F. Bonollo: Modell. Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 08500310.1088/0965-0393/20/8/085003 ↗
27. D. Deng: Mater. Des., 2009, vol. 30, pp. 359-36610.1016/j.matdes.2008.04.052 ↗
28. D.P. Koistinen and R.E. Marburger: Acta Mater., 1959, vol. 7, pp. 59-6010.1016/0001-6160(59)90170-1 ↗
29. S. M. C. van Bohemen and J. Sietsma: Mater. Sci. Technol., 2009, vol. 25, pp. 1009-01210.1179/174328408X365838 ↗
30. S.-J. Lee and C. Van Tyne: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 422-2710.1007/s11661-011-0872-z ↗
31. P. Kruger: J. Phys. Chem. Solids, 1993, vol. 54, pp. 1549-55510.1016/0022-3697(93)90349-V ↗
32. M.J. Starink and A.-M. Zahra: Thermochim. Acta, 1997, vol. 292, pp. 158-16910.1016/S0040-6031(96)03135-8 ↗
33. E.J. Mittemeijer, A. Van Gent, and P.J. Van Der Schaaf: Metall. Trans. A, 1986, vol. 17A, pp. 1441-4510.1007/BF02650126 ↗
34. E.J. Mittemeijer, L. Cheng, P.J. Van Der Schaaf, C.M. Brakman and B.M. Korevaar: Metall. Trans. A, 1988, vol. 19A, pp. 925-93210.1007/BF02628377 ↗
35. H.E. Kissinger: Anal. Chem., 1957, vol. 29, pp. 1702-170610.1021/ac60131a045 ↗
36. A. Bojack, L. Zhao, P.F. Morris, and J. Sietsma: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1996-200910.1007/s11661-016-3404-z ↗
37. C. Capdevilla, F.G. Caballero and C. García De Andrés: ISIJ Int., 2002, vol. 42, pp. 894-90210.2355/isijinternational.42.894 ↗
38. ASTM A240 / A240M-18, Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications, ASTM International, West Conshohocken, PA, 2018
39. S. Godin, C. Lévesque-Tremblay, A. Lapointe, P. Hovington: Report No. IREQ-2017-0059, Institut de recherche d’Hydro-Québec, Varennes, Qc, Mar. 2017
40. M. Tireh-Dast: Finite element modelling of the heat source during welding of 415 steel joints (13%CR-4%NI) with the robotic FCAW,École de technologie supérieure, Montréal, Ca, 2015
41. Y.S. Touloukian, C.Y. Ho: Thermophysical Properties of Matter, Plenum Publishing Corporation, New York, N.Y., 1979
42. D.A. Bouffard, J. Lanteigne: Report No. IREQ-2004-158, Institut de recherche d’Hydro-Québec, Varennes, Qc, Sep. 2004
43. J. Goldak, A. Chakravarti, M. Bibby: Metall. Trans. B, 1984, vol. 15, pp. 299-30510.1007/BF02667333 ↗
44. C. Lippold and D. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, John & sons, Wiley, 2005, pp. 56-86
45. Y.Y. Song, D.H. Ping, F.X. Yin, X.Y. Li, Y.Y. Li: Mater. Sci. Eng., A, 2010, vol. 527, pp. 614–61810.1016/j.msea.2009.08.022 ↗
46. S. Zhang, P. Wang, D. Li, Y. Li: Mater. Des., 2015, vol. 84, pp. 385-39410.1016/j.matdes.2015.06.143 ↗
47. M. M. Amrei, H. Monajati, D. Thibault, Y. Verreman, P. Bocher: Metallogr. Microstruct. Anal., 2016, vol. 5, pp. 50-6110.1007/s13632-015-0251-z ↗