journal article·2019-11

Study on the Influence of Prior Cold Work on Precipitation Behavior of 304HCu Stainless Steel During Isothermal Aging

R. Manojkumar, S. Mahadevan, C. K. Mukhopadhyay, M. N. Singh

Publisher page

Abstract

The precipitation strengthening behavior of 304HCu austenitic stainless steel during isothermal aging at 650 °C is studied under 10 and 20 pct prior cold-worked conditions. The age hardening behavior under these cold-working conditions have been studied using hardness and electrical conductivity measurements. The analysis of electrical conductivity and hardness variation, during isothermal aging at 650 °C using the Johnson–Mehl–Avrami equation, indicates an increase in precipitation kinetics in the matrix, influenced by the dislocations formed during cold working. Further, XRD profiles of different cold-worked samples obtained from the INDUS-2 synchrotron are able to indicate the formation of very fine precipitates during thermal aging and these findings are corroborated with conductivity and hardness changes. The observed change in precipitation kinetics due to deformation is analyzed to evaluate an equivalent change in activation energy which is attributed to an equivalent of increase in aging temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. R. Viswanathan and W. Bakker: J. Mater. Eng. Perform., 2001, vol. 10, pp. 83.
2. P.S. Weitzel: Steam Generator for Advanced Ultra Supercritical Power Plants 700 °C to 760 °C, in Proc. ASME 2011 Power Conf., Denver, Colorado, USA, 2011, pp. 1–10.10.1115/POWER2011-55039 ↗
3. R. Viswanathan, K. Coleman, and U. Rao: Int. J. Press. Vessels Pip., 2006, vol. 83, pp. 778-783.10.1016/j.ijpvp.2006.08.006 ↗
4. D. Gandy, J.P. Shingledecker, P.J. Maziasz, G. Maurer, and J. Magee: Adv. Mater. Technol. Fossil Power Plants: Proc. Sixth Int. Conf., Santa Fe, New Mexico, USA, 2011, pp. 916–34.
5. I. Sen, E. Amankwah, N. S. Kumar, E. Fleury, K. Ohishi, K. Hono, and U. Ramamurty (2011) Mater. Sci. Eng. A, 528:4491-4499.10.1016/j.msea.2011.02.019 ↗
6. I.T. Hong and C.H. Koo: Mater. Sci. Eng. A, 2005, vol. 393, pp. 213-222.10.1016/j.msea.2004.10.032 ↗
7. TAN Shu-ping and Z. Wang (2010) J. Iron. Steel Res. Int, 17:63-68.
8. A. Mathur, O.P. Bhutani, T. Jayakumar, D.K. Dubey, and S.C. Chetal: Adv. Mater. Technol. Fossil Power Plants: Proc. Seventh Int. Conf., Waikoloa, Hawaii, USA, 2013, pp. 53–59.
9. A. H. V. Pavan, K. S. N. Vikrant, R. Ravibharath, and K. Singh (2015) Mater. Sci. Eng. A, 542: 32-41.10.1016/j.msea.2015.06.065 ↗
10. Y. Sawaragi and S. Hirano: in New Alloys for Pressure Vessels and Piping, New York, 1990, pp. 141–146.
11. C Chi, H Yu, J Dong, X Xie, Z Cui, X Chen, and F Lin: Acta Metall. Sinica, vol. 24, pp. 141-147, 2011.
12. ManmathkumarDash, T. Karthikeyan, R. Mythili, V.D. Vijayanand, and S. Saroja (2017) Metall. Mater. Trans. A, 48A: 4883-4894.10.1007/s11661-017-4260-1 ↗
13. A. Iseda, H. Okada, H. Semba, and M. Igarashi: Energy Materials, 2007, vol. 2, pp. 199-206.10.1179/174892408X382860 ↗
14. V. Ganesan, K. Laha, and A. K. Bhaduri: Trans Indian Inst Met, 2016, vol. 69, pp. 247-251.10.1007/s12666-015-0779-2 ↗
15. X Huang, Q Zhou, W Wang, W S Li, and Y Gao: Mater. High Temp., 2017, vol. 35, pp. 438-450.10.1080/09603409.2017.1376831 ↗
16. L Ren, L Nan, and K Yang: Mater. Des., 2011, vol. 32, pp. 2374-2379.10.1016/j.matdes.2010.11.030 ↗
17. B. Dutta, E. J. Palmier, and C. M. Sellars: Acta mater., 2001, vol. 49, pp. 785-794.10.1016/S1359-6454(00)00389-X ↗
18. Y Zhou, Y Liu, Y Liu, C Liu, J Yu, Y Huang, H Li, WL: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1448-1456.10.1016/j.jmst.2017.01.025 ↗
19. S. Mahadevan, R. Manojkumar, T. Jayakumar, C. R. Das, and B. P.C. Rao: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3109-3118.10.1007/s11661-016-3440-8 ↗
20. R. Manojkumar, S. Mahadevan, C. K. Mukhopadhyay, and B. P. C. Rao (2017) J. Mater. Res. 32: 4263-4271.10.1557/jmr.2017.396 ↗
21. U. K. Viswanathan, P. K. K. Nayar, and R. Krishnan: Mater. Sci. Technol., 1989, vol. 5, pp. 346-349.10.1179/mst.1989.5.4.346 ↗
22. C. V. Robino, P. W. Hochanadel, G. R. Edwards, and M. J. Cieslak: Metallurgical and materials transactions A, 1994, vol. 25A, pp. 697-704.10.1007/BF02665446 ↗
23. VK Vasudevan, SJ Kim, and CM Wayman: Metall. Trans. A, 1990, vol. 21A, pp. 265-2668.
24. E Kozeschnik, Modeling Solid-State Precipitation. 1st ed. Momentum Press, New york, USA, 2013.
25. A.K. Sinha, A. Sagdeo, P. Gupta, A. Upadhyay, A. Kumar, M.N. Singh, R.K. Gupta, S.R. Kane, A. Verma, S.K. Deb (2013) J. Phys. Conf. Ser., 425: 072017.10.1088/1742-6596/425/7/072017 ↗
26. J Jiang and L Zhu: Mater. Sci. Eng. A, 2012, vol. 539, pp. 170-176.10.1016/j.msea.2012.01.076 ↗
27. Q Zhou, S Ping, X Meng, R Wang, and Y Gao (2017) J. Mater. Eng. Perform., 26: 6130–6139.10.1007/s11665-017-2982-2 ↗
28. S-M Hong, M-Y Kim, D-J Min, K Lee, J-H Shim, D-I Kim, J-Y Suh, W-S Jung, I-S Choi: Mater. Charact., 2014, vol. 94, pp. 7-13.10.1016/j.matchar.2014.04.002 ↗
29. L Ren, J Zhu, L Nan, and K Yang: Mater.Des., 2011, vol. 32, pp. 3980-3985.10.1016/j.matdes.2011.03.068 ↗
30. Y Zhou, C Liu, Y Liu, Q Guo, and H Li: Int. J. Miner. Metall. Mater., 2016, vol. 23, pp. 283-293.10.1007/s12613-016-1237-9 ↗
31. A. Boeuf, C. Crico, R. Caciuffo, F. Rustechelli, I. Pomot, G. Uny: Mater. Lett., 1985, vol. 3, pp. 115-118.10.1016/0167-577X(85)90010-2 ↗