An Investigation of Columnar to Equiaxed Transition and the Effect of Cooling Rate on Nucleus Density Distribution of an Industrial Ti and Nb-Stabilized Ferritic Stainless Steel
Source abstract
Abstract
The heterogeneous nucleus distribution of an industrial Ti and Nb-stabilized ferritic stainless steel (FSS) with high-equiaxed zone ratio was investigated in detail. The heterogeneous nucleus is the complex nucleus mainly composed of central Ti-containing oxide and external (Ti,Nb)(CN). A “V” type distribution of complex nucleus was revealed in the thickness direction, indicating that the nucleus density decreases as the slab solidifies. A “W” type distribution of equiaxed crystals was also observed in the thickness direction. A linear relationship between equiaxed crystal density and nucleus density was obtained in the columnar to equiaxed transition (CET) and quarter position of the slab, indicating that the density of equiaxed crystals is significantly influenced by that of the complex nucleus. Theoretical analysis and confocal laser scanning microscopy experiments were carried out to reveal the distribution mechanism of the complex nucleus. The results showed that the cooling rate has a significant influence on the nucleation undercooling of FSS, which indirectly affects the formation of the complex nucleus. Based on these findings, a numerical model was established to investigate the CET of FSS, and the prediction was in good agreement with the experimental results. According to the numerical model, even if the nucleus density decreases during solidification, it is still sufficient for stimulation of CET.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. H.-J. Shin, J.-K. An, S. H. Park and D. N. Lee, Acta Metall., 2003, vol. 51, pp. 4693-706.
2. J.-i. Hamada, Y. Matsumoto, F. Fudanoki and S. Maeda, ISIJ Int., 2003, vol. 43, pp. 1989-98.10.2355/isijinternational.43.1989 ↗
3. H. Liu, Z. Liu and G. Wang, ISIJ Int., 2009, vol. 49, pp. 890-96.10.2355/isijinternational.49.890 ↗
4. Y. Shao, C. Liu, T. Yue, Y. Liu, Z. Yan and H. Li, Metall. Mater. Trans. B, 2018, vol. 49, pp. 1560-67.10.1007/s11663-018-1273-0 ↗
5. S. Ikeda, Nippon Steel Tech. Rep., 2010, vol. 99, pp. 2-8.
6. Y. Yazawa, Y. Ozaki, Y. Kato and O. Furukimi, JSAE Review, 2003, vol. 24, pp. 483-88.10.1016/S0389-4304(03)00082-1 ↗
7. T. Kawasaki, Kawasaki Steel Tech. Rep., 1999, vol. 40, pp. 5-15.
8. K. Kimura and A. Takahashi, Nippon Steel Tech. Rep., 2010, vol. 99, pp. 51-55.
9. S. Kusunoki, R. Nishihara, K. Kato, H. Sakagami, S. Hirashima, and N. Fukunaga: Nippon Steel Tech. Rep., 2013, vol. 104.
10. Q. Rui, F. Jiang, Z. Ma, Z. You, G. Cheng and J. Zhang, Steel Res. Int., 2013, vol. 84, pp. 192-97.10.1002/srin.201200182 ↗
11. Z. You, G. Cheng, X. Wang, Z. Qin, J. Tian and J. Zhang, Metall. Mater. Trans. B, 2015, vol. 46, pp. 459-72.10.1007/s11663-014-0182-0 ↗
12. R. T. J. Hodges, Corros., 1971, vol. 27, pp. 119-27.10.5006/0010-9312-27.3.119 ↗
13. H. Tomari, K. Fujiwara, K. Shimogori, T. Fukuzuka and M. Kanda, Corros., 1982, vol. 38, pp. 283-94.10.5006/1.3577351 ↗
14. H. Y. Ha, C. J. Park and H. S. Kwon, Corros. Sci., 2007, vol. 49, pp. 1266-75.10.1016/j.corsci.2006.08.017 ↗
15. J. K. Kim, Y. H. Kim, S. H. Uhm, J. S. Lee and K. Y. Kim, Corros. Sci., 2009, vol. 51, pp. 2716-23.10.1016/j.corsci.2009.07.008 ↗
16. K. Ishii, T. Ishii, and H. Ota: JFE Tech. Rep., 2008, pp. 39–44.10.1016/B978-0-323-04404-2.10003-X ↗
17. P. Modak, S. Patra, R. Mitra and D. Chakrabarti, Metall. Mater. Trans. A, 2018, vol. 49, pp. 2219-34.10.1007/s11661-018-4566-7 ↗
18. S. Park, K. Kim, Y. Lee and C. Park, ISIJ Int., 2002, vol. 42, pp. 100-05.10.2355/isijinternational.42.100 ↗
19. Y. Hou, S. Li and G. Cheng, Metall. Mater. Trans. A, 2018, vol. 49, pp. 5445-57.10.1007/s11661-018-4838-2 ↗
20. M. Brochu, T. Yokota and S. Satoh, ISIJ Int., 1997, vol. 37, pp. 872-77.10.2355/isijinternational.37.872 ↗
21. Y. Hou and G. Cheng, ISIJ Int., 2018, vol. 58, pp. 2298-307.10.2355/isijinternational.ISIJINT-2017-595 ↗
22. A. Ito, H. Suito and R. Inoue, ISIJ Int., 2012, vol. 52, pp. 1196-205.10.2355/isijinternational.52.1196 ↗
23. S. K. Kim, H. Suito and R. Inoue, ISIJ Int., 2012, vol. 52, pp. 1935-44.10.2355/isijinternational.52.1935 ↗
24. K. Kimura, S. Fukumoto, G. Shigesato and A. Takahashi, ISIJ Int., 2013, vol. 53, pp. 2167-75.10.2355/isijinternational.53.2167 ↗
25. J. Mola, I. Jung, J. Park, D. Chae and B. C. de Cooman, Metall. Mater. Trans. A, 2012, vol. 43, pp. 228-44.10.1007/s11661-011-0824-7 ↗
26. J. Fu, W. Qiu, Q. Nie and Y. Wu, J. Alloys Compd., 2017, vol. 699, pp. 938-46.10.1016/j.jallcom.2017.01.018 ↗
27. C.-x. Shi, G.-g. Cheng, Z.-j. Li and P. Zhao, J. Iron Steel Res. Int., 2008, vol. 15, pp. 57-60.10.1016/S1006-706X(08)60126-0 ↗
28. J. C. Villafuerte, H. W. Kerr and S. A. David, Mater. Sci. Eng. A, 1995, vol. 194, pp. 187-91.10.1016/0921-5093(94)09656-2 ↗
29. J. C. Villafuerte, E. Pardo and H. W. Kerr, Metall. Trans. A, 1990, vol. 21, pp. 2009-19.10.1007/BF02647249 ↗
30. H. Fujimura, S. Tsuge, Y. Komizo and T. Nishizawa, Tetsu-to-Hagane, 2001, vol. 87, pp. 707-12.10.2355/tetsutohagane1955.87.11_707 ↗
31. A. Hunter and M. Ferry, Metall. Mater. Trans. A, 2002, vol. 33, pp. 1499-507.10.1007/s11661-002-0072-y ↗
32. J. Y. Kim, N. R. Oh, Y. H. Oh, Y. T. Cho, W. B. Lee, S. K. Kim and H. U. Hong, Mater. Charact., 2017, vol. 132, pp. 348-53.10.1016/j.matchar.2017.09.001 ↗
33. J. S. Park, D. H. Kim and J. H. Park, J. Alloys Compd., 2017, vol. 695, pp. 476-81.10.1016/j.jallcom.2016.11.103 ↗
34. Y. Hou and G. Cheng, Metall. Mater. Trans. B, 2019, vol. 50, pp. 1322-33.10.1007/s11663-019-01557-5 ↗
35. Y. Hou and G. Cheng, Metall. Mater. Trans. B, 2019, vol. 50, pp. 1351-64.10.1007/s11663-019-01540-0 ↗
36. L. Bai, B. Wang, H. Zhong, J. Ni, Q. Zhai and J. Zhang, Metals, 2016, vol. 6, pp. 53-64.10.3390/met6030053 ↗
37. H. Shibata, S. Itoyama, Y. Kishimoto, S. Takeuchi and H. Sekiguchi, ISIJ Int., 2006, vol. 46, pp. 921-30.10.2355/isijinternational.46.921 ↗
38. S. Ogibayashi: Nippon Steel Tech. Rep., 1994, pp. 70–76.
39. M. Gäumann, R. Trivedi and W. Kurz, Mater. Sci. Eng. A, 1997, vol. 226, pp. 763-69.10.1016/S0921-5093(97)80081-0 ↗
40. D.A. Porter, K.E. Easterling, and M. Sherif: Phase Transformations in Metals and Alloys, (Revised Reprint). (CRC Press, Boca Raton, 2009).10.1201/9781439883570 ↗
41. Z. Hou, F. Jiang and G. Cheng, ISIJ Int., 2012, vol. 52, pp. 1301-09.10.2355/isijinternational.52.1301 ↗
42. X. Gao, S. Yang and J. Li, Mater. Design, 2016, vol. 110, pp. 284-95.10.1016/j.matdes.2016.08.005 ↗
43. H. Takeuchi, Y. Ikehara, T. Yanai and S. Matsumura, Tetsu-to-Hagane, 1977, vol. 63, pp. 1287-96.10.2355/tetsutohagane1955.63.8_1287 ↗
44. J. H. Park, S.-B. Lee and H. R. Gaye, Metall. Mater. Trans. B, 2008, vol. 39, pp. 853-61.10.1007/s11663-008-9172-4 ↗
45. J. H. Park and H. Todoroki, ISIJ Int., 2010, vol. 50, pp. 1333-46.10.2355/isijinternational.50.1333 ↗
46. J. H. Park, Calphad, 2011, vol. 35, pp. 455-62.10.1016/j.calphad.2011.08.004 ↗
47. J. S. Park and J. H. Park, Steel Res. Int., 2014, vol. 85, pp. 1303-09.10.1002/srin.201300203 ↗
48. D. Kashchiev, A. Borissova, R. B. Hammond and K. J. Roberts, J. Cryst. Growth, 2010, vol. 312, pp. 698-704.10.1016/j.jcrysgro.2009.12.031 ↗
49. B. L. Bramfitt, Metall. Trans., 1970, vol. 1, pp. 1987-95.10.1007/BF02642799 ↗
50. J. S. Park, C. Lee and J. H. Park, Metall. Mater. Trans. B, 2012, vol. 43, pp. 1550-64.10.1007/s11663-012-9734-3 ↗
51. J. A. Spittle, Int. Mater. Rev., 2006, vol. 51, pp. 247-69.10.1179/174328006X102493 ↗
52. J. K. Brimacombe and K. Sorimachi, Metall. Trans. B, 1977, vol. 8, pp. 489-505.10.1007/BF02696937 ↗