Correlation Between Secondary Precipitation and Tensile Ductility of High-Speed Steels
Source abstract
Abstract
The aim of this study is to evaluate the effect of secondary carbide precipitation on strain hardening and tensile ductility of high-speed steels and to develop a novel pathway for ductility enhancement by engineering the annealing microstructure. The results demonstrate a strong correlation between secondary precipitation and austenitization. With decreasing austenitization temperature, secondary carbides exhibit a transformation from a rod-shaped Cr-rich M23C6 type to a granular Mo-rich M6C one, corresponding to a transition of the underlying eutectoid decomposition mechanism from a cooperative growth mode to a divorced eutectoid manner. Highly dispersed rod-shaped M23C6 precipitates contribute to an enhanced tensile strength but lead to a degraded work hardening rate in the late deformation stage and, therefore, a lower total elongation. In contrast, granular M6C precipitates exhibit an excellent capacity of accumulating dislocations and enhancing the work hardening rate especially at a high strain, which enables a significant increase of ductility. It is suggested that granular M6C precipitates embedded in fine ferritic grains with lean dislocations is a desirable annealing microstructure to produce a more ductile high-speed steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. M. Boccalini and H. Goldenstein: Int. Mater. Rev., 2001, vol. 46, pp. 92–115.10.1179/095066001101528411 ↗
2. E.S. Lee, W.J. Park, K.H. Baik, and S. Ahn: Scripta Mater., 1998, vol. 39, pp. 1133–38.10.1016/S1359-6462(98)00270-X ↗
3. S. Lee, C.G. Lee, K.S. Sohn, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
4. L. Lu, L.G. Hou, H. Cui, J.F. Huang, Y.A. Zhang, J.S. Zhang: J. Iron Steel Res. Int., 2016, vol. 23, pp. 501–08.10.1016/S1006-706X(16)30079-6 ↗
5. L. Lu, L. G. Hou, J.X. Zhang, H.B. Wang, H. Cui, J.F. Huang, Y.A. Zhang, and J.S. Zhang: Mater. Charact., 2016, vol. 117, pp. 1–8.10.1016/j.matchar.2016.04.010 ↗
6. Y.K. Luan, N.N. Song, Y.L. Bai, X.H. Kang, and D.Z. Li: J. Mater. Process. Technol., 2010, vol. 210, pp. 536–41.10.1016/j.jmatprotec.2009.10.017 ↗
7. M.J. Wang, L. Chen, Z.X. Wang, and E. Bao: J. Rare Earth, 2012, vol. 30, pp. 84–89.10.1016/S1002-0721(10)60644-8 ↗
8. Q.X. Liu, D.P. Lu, L. Lu, Q. Hu, Q.F. Fu, and Z. Zhou: J. Iron Steel Res. Int., 2015, vol. 22, pp. 245–49.10.1016/S1006-706X(15)60037-1 ↗
9. F.S. Pan, W.Q. Wang, A.T. Tang, L.Z. Wu, T.T. Liu, and R.J. Cheng: Progr. Nat. Sci. Mater. Int., 2011, vol. 21, pp. 180–86.10.1016/S1002-0071(12)60053-7 ↗
10. Y.T. Zhu and X. Liao: Nat. Mater., 2004, vol. 3, pp. 351–52.10.1038/nmat1141 ↗
11. R. Song, D. Ponge, and D. Raabe: Scripta Mater., 2005, vol. 52, pp. 1075–80.10.1016/j.scriptamat.2005.02.016 ↗
12. T. Lee, C.H. Park, D.L. Lee, and C.S. Lee: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6558–64.10.1016/j.msea.2011.05.007 ↗
13. C Prasad, P. Bhuyan, C. Kaithwas, R. Saha, and S. Mandal: Mater. Design, 2018, vol. 139, pp. 324–35.10.1016/j.matdes.2017.11.019 ↗
14. N. Tsuji, N. Kamikawa, R. Ueji, N. Takata, H. Koyama, and D. Terada: ISIJ Int., 2008, vol. 48, pp. 1114–21.10.2355/isijinternational.48.1114 ↗
15. X.L. Wu, P. Jiang, L. Chen, F.P. Yuan, and Y.T. Zhu: Proc. Nat. Acad. Sci., 2014, vol. 111, pp. 7197–7201.10.1073/pnas.1324069111 ↗
16. J.L. Ning, Y.T. Zhang, L. Huang, and Y.L. Feng: Mater. Design, 2017, vol. 120, pp. 280–90.10.1016/j.matdes.2017.02.031 ↗
17. R. Song, D. Ponge, and D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881–92.10.1016/j.actamat.2005.07.009 ↗
18. G.Q. Zhang, H. Yuan, D.L. Jiao, Z. Li, Y. Zhang, and Z.W. Liu: Mater. Sci. Eng. A, 2012, vol. 558, pp. 566–71.10.1016/j.msea.2012.08.050 ↗
19. Y.P. Ji, S.J. Wu, L.J. Xu, Y. Li, and S.Z. Wei: Wear, 2012, vol. 294, pp. 239–45.10.1016/j.wear.2012.07.003 ↗
20. H.B. Wang, L.G. Hou, J.X. Zhang, L. Lu, H. Cui, and J.S. Zhang: Mater. Charact., 2015, vol. 106, pp. 245–54.10.1016/j.matchar.2015.06.006 ↗
21. J. Verhoeven and E. Gibson: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1181–89.10.1007/s11661-998-0245-4 ↗
22. M. Puls and J. Kirkaldy: Metall. Trans., 1972, vol. 3, pp. 2777–96.10.1007/BF02652844 ↗
23. J. Verhoeven: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2431–38.10.1007/s11661-000-0188-x ↗
24. P. Payson, W.L. Hodapp, and J. Leeder: Trans. ASM, 1940, vol. 28, pp. 306–26.
25. Y. Li and K. Ramesh: Acta Mater., 1998, vol. 46, pp. 5633–46.10.1016/S1359-6454(98)00250-X ↗
26. C. Sinclair, W. Poole, and Y. Bréchet: Scripta Mater., 2006, vol. 55, pp. 739–42.10.1016/j.scriptamat.2006.05.018 ↗
27. J.B. Kosco and D.A. Koss: Mater. Sci. Eng. A, 1993, vol. 169, pp. 1–7.10.1016/0921-5093(93)90592-3 ↗
28. C. Zheng, L. Li, W. Yang, and Z. Sun: Acta Metall. Sinica, 2013, vol. 49, pp. 257–64.10.3724/SP.J.1037.2012.00503 ↗