The Role of Plastic Strain on the Delayed Fracture Behavior of Twinning-Induced Plasticity Steels
Source abstract
Abstract
The present work investigates delayed fracture (DF) behavior of a twinning-induced plasticity (TWIP) steel in a neutral environment using deep-drawn cup specimens. The specimens are exposed to different corrosive environment to observe the occurrence of DF. The results reveal that the DF of TWIP steel is caused by a hydrogen-assisted transgranular stress corrosion cracking mechanism. Besides the residual stress, we demonstrate that the plastic strain plays a crucial role on the DF of TWIP steel by accelerating the crack growth rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. C. Gurney and Z. Borysowski, Proceedings of the Physical Society 1948, vol. 61, pp. 446.10.1088/0959-5309/61/5/305 ↗
2. N. J. Petch and P. Stables, Nature 1952, vol. 169, pp. 842-843.10.1038/169842a0 ↗
3. H. Uhlig, A. White and J. Lincoln, Acta Metallurgica 1957, vol. 5, pp. 473-475.10.1016/0001-6160(57)90066-4 ↗
4. Motomichi Koyama, Eiji Akiyama and Kaneaki Tsuzaki, Corrosion Science 2012, vol. 59, pp. 277-281.10.1016/j.corsci.2012.03.009 ↗
5. M. Koyama, E. Akiyama and K. Tsuzaki, Corrosion Science 2012, vol. 54, pp. 1-4.10.1016/j.corsci.2011.09.022 ↗
6. Il-Jeong Park, Seo Yeon Jo, Minwoo Kang, Sang-Min Lee and Young-Kook Lee, Corrosion Science 2014, vol. 89, pp. 38-45.10.1016/j.corsci.2014.08.005 ↗
7. T. Dieudonné, L. Marchetti, M. Wery, F. Miserque, M. Tabarant, J. Chêne, C. Allely, P. Cugy and C. P. Scott, Corrosion Science 2014, vol. 83, pp. 234-244.10.1016/j.corsci.2014.02.018 ↗
8. Xu Zhu, Wei Li, Hongshan Zhao, Li Wang and Xuejun Jin, International Journal of Hydrogen Energy 2014, vol. 39, pp. 13031-13040.10.1016/j.ijhydene.2014.06.079 ↗
9. Xu Zhu, Ke Zhang, Wei Li and Xuejun Jin, Materials Science and Engineering: A 2016, vol. 658, pp. 400-408.10.1016/j.msea.2016.02.026 ↗
10. X. Zhu, W. Li, T.Y. Hsu, S. Zhou, L. Wang and X. Jin: Scripta Materialia, 2015, vol. 97, pp. 21–24.10.1016/j.scriptamat.2014.10.030 ↗
11. Jeongho Han, Jae-Hoon Nam and Young-Kook Lee, Acta Materialia 2016, vol. 113, pp. 1-10.10.1016/j.actamat.2016.04.038 ↗
12. Y. Li, W. Li, J.C. Hu, H.M. Song and X.J. Jin, Int. J. Plasticity 2017, vol. 88, pp. 53-69.10.1016/j.ijplas.2016.09.012 ↗
13. J. R. Buckley and D. Hardie, Corrosion Science 1993, vol. 34, pp. 93-107.10.1016/0010-938X(93)90261-E ↗
14. Motomichi Koyama, Eiji Akiyama, Kaneaki Tsuzaki and Dierk Raabe, Acta Materialia 2013, vol. 61, pp. 4607-4618.10.1016/j.actamat.2013.04.030 ↗
15. T. Dieudonné, L. Marchetti, M. Wery, J. Chêne, C. Allely, P. Cugy and C. P. Scott, Corrosion Science 2014, vol. 82, pp. 218-226.10.1016/j.corsci.2014.01.022 ↗
16. J. Zhao, Z. Jiang and C.S. Lee, Corrosion Science 2014, vol. 82, pp. 380-91.10.1016/j.corsci.2014.01.042 ↗
17. Motomichi Koyama, Eiji Akiyama, Takahiro Sawaguchi, Dierk Raabe and Kaneaki Tsuzaki, Scripta Materialia 2012, vol. 66, pp. 459-462.10.1016/j.scriptamat.2011.12.015 ↗
18. J.H. Ryu, S.K. Kim, C.S. Lee, D.-W. Suh and H.K.D.H. Bhadeshia: Proc. R. Soc. A Math. Phys. Eng. Sci., 2013, vol. 469, 20120458.10.1098/rspa.2012.0458 ↗
19. S. Hong, S.Y. Shin, H.S. Kim, S. Lee, S.-K. Kim, K.-G. Chin and N.J. Kim: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2013, vol. 44A, pp. 776–86.10.1007/s11661-012-1472-2 ↗
20. Seokmin Hong, Junghoon Lee, Byeong-Joo Lee, Hyoung Seop Kim, Sung-Kyu Kim, Kwang-Geun Chin and Sunghak Lee, Materials Science and Engineering: A 2013, vol. 587, pp. 85-99.10.1016/j.msea.2013.08.063 ↗
21. S. Hong, S.Y. Shin, H.S. Kim, S. Lee, S.-K. Kim, K.-G. Chin and N.J. Kim: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2012, vol. 43A, pp. 1870–83.10.1007/s11661-011-1007-2 ↗
22. Seokmin Hong, Junghoon Lee, Sunghak Lee, Wanchuck Woo, Sung-Kyu Kim and Hyoung Seop Kim, Metallurgical and Materials Transactions A 2014, vol. 45, pp. 1953-1961.10.1007/s11661-013-2161-5 ↗
23. R. T. van Tol, L. Zhao, H. Schut and J. Sietsma, Metallurgical and Materials Transactions A 2012, vol. 43, pp. 3070-3077.10.1007/s11661-012-1123-7 ↗
24. S. Ortega, S. Papula, T. Saukkonen, J. Talonen and H. Hänninen: Fatigue Fract. Eng. Mater. Struct., 2014, vol. 38(1), pp. 1–11.10.1111/ffe.12206 ↗
25. J.G. Kim, J.I. Yoon, S.M. Baek, M.H. Seo, W.T. Cho, K.-G. Chin, S. Lee and H.S. Kim: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2692–96.10.1007/s11661-017-4056-3 ↗
26. O. Muránsky, C. J. Hamelin, M. C. Smith, P. J. Bendeich and L. Edwards, Comput. Mater. Sci. 2012, vol. 54, pp. 125-134.10.1016/j.commatsci.2011.10.026 ↗
27. B. K. Chun, H. Y. Kim and J. K. Lee, International Journal of Plasticity 2002, vol. 18, pp. 597-616.10.1016/S0749-6419(01)00047-X ↗
28. K. Chung, K. Ahn, D. H. Yoo, K. H. Chung, M. H. Seo and S. H. Park, International Journal of Plasticity 2011, vol. 27, pp. 52-81.10.1016/j.ijplas.2010.03.006 ↗
29. O. Bouaziz, S. Allain and C. Scott, Scripta Materialia 2008, vol. 58, pp. 484-487.10.1016/j.scriptamat.2007.10.050 ↗
30. B. K. Chun, J. T. Jinn and J. K. Lee, International Journal of Plasticity 2002, vol. 18, pp. 571-595.10.1016/S0749-6419(01)00046-8 ↗
31. K. Piao, J. K. Lee, J. H. Kim, H. Y. Kim, K. Chung, F. Barlat and R. H. Wagoner, International Journal of Plasticity 2012, vol. 38, pp. 27-46.10.1016/j.ijplas.2012.03.009 ↗
32. K. G. Chin, C. Y. Kang, S. Y. Shin, S. Hong, S. Lee, H. S. Kim, K. H. Kim and N. J. Kim, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2011, vol. 528, pp. 2922-2928.10.1016/j.msea.2010.12.085 ↗
33. Thorsten Michler, Joerg Naumann, Martin Hock, Karl Berreth, Michael P. Balogh and Erich Sattler, Materials Science and Engineering: A 2015, vol. 628, pp. 252-261.10.1016/j.msea.2015.01.054 ↗
34. Z. C. Luo and M. X. Huang, Scripta Materialia 2018, vol. 142, pp. 28-31.10.1016/j.scriptamat.2017.08.017 ↗
35. Marko Vrh, Miroslav Halilovič, Bojan Starman and Boris Štok, International Journal of Material Forming 2009, vol. 2, p. 825.10.1007/s12289-009-0514-9 ↗
36. S. Bouvier, H. Haddadi, P. Levée and C. Teodosiu, Journal of Materials Processing Technology 2006, vol. 172, pp. 96-103.10.1016/j.jmatprotec.2005.09.003 ↗
37. S. Klein, M. Staring, K. Murphy, M. A. Viergever and J. P. Pluim, IEEE transactions on medical imaging 2010, vol. 29, pp. 196-205.10.1109/TMI.2009.2035616 ↗
38. T. J. Carter and L. A. Cornish, Engineering Failure Analysis 2001, vol. 8, pp. 113-121.10.1016/S1350-6307(99)00040-0 ↗
39. Richard A Oriani, Acta metallurgica 1970, vol. 18, pp. 147-157.10.1016/0001-6160(70)90078-7 ↗
40. K. Ahn, D. Yoo, M. H. Seo, S. H. Park and K. Chung, Met. Mater.-Int. 2009, vol. 15, pp. 637-647.10.1007/s12540-009-0637-z ↗
41. I. Gutierrez-Urrutia, J. A. del Valle, S. Zaefferer and D. Raabe, Journal of Materials Science 2010, vol. 45, pp. 6604-6610.10.1007/s10853-010-4750-7 ↗
42. Z. Szklarskasmialowska and J. Mankowski, Corrosion Science 1978, vol. 18, pp. 953-960.10.1016/0010-938X(78)90030-6 ↗
43. Eiji Akiyama, Katsuhiro Matsukado, Maoqiu Wang and Kaneaki Tsuzaki, Corrosion Science 2010, vol. 52, pp. 2758-2765.10.1016/j.corsci.2009.11.046 ↗
44. Songjie Li, Eiji Akiyama, Nobuyoshi Uno, Keiji Hirai, Kaneaki Tsuzaki and Boping Zhang, Corrosion Science 2010, vol. 52, pp. 3198-3204.10.1016/j.corsci.2010.05.038 ↗
45. Tooru Tsuru, Yanliang Huang, Md Rostom Ali and Atsushi Nishikata, Corrosion Science 2005, vol. 47, pp. 2431-2440.10.1016/j.corsci.2004.10.006 ↗
46. G. Lu, Q. Zhang, N. Kioussis and E. Kaxiras, Physical review letters 2001, vol. 87, p. 095501.10.1103/PhysRevLett.87.095501 ↗
47. Jeffrey Venezuela, Qinglong Liu, Mingxing Zhang, Qingjun Zhou and Andrej Atrens, Corrosion Science 2015, vol. 99, pp. 98-117.10.1016/j.corsci.2015.06.038 ↗
48. SP Lynch, Acta Metallurgica 1988, vol. 36, pp. 2639-2661.10.1016/0001-6160(88)90113-7 ↗
49. J.H. Ryu: Pohang: Pohang University of Science and Technology, 2012.
50. S. Ghosh, V.P.S. Rana, V. Kain, V. Mittal and S.K. Baveja: Mater. Des., 2011, vol. 32, pp. 3823–31.10.1016/j.matdes.2011.03.012 ↗
51. M. Seita, J. P. Hanson, S. Gradecak and M. J. Demkowicz, Nature communications 2015, vol. 6, p. 6164.10.1038/ncomms7164 ↗
52. R.K.S. Raman, M. Khalissi and S. Khoddam: Scripta Mater., 2012, vol. 67, pp. 943–46.10.1016/j.scriptamat.2012.08.022 ↗
53. Hideo Niwa, Satoru Asawa, Shiro Haruyama and T. Mori, Corrosion Science 1983, vol. 23, pp. 959-968.10.1016/0010-938X(83)90023-9 ↗
54. Yuhang Hou, Yunping Li, Chen Zhang, Yuichiro Koizumi and Akihiko Chiba, Corrosion science 2014, vol. 89, pp. 258-267.10.1016/j.corsci.2014.09.004 ↗