Simulated Microstructural and Compositional Evolution of U-Pu-Zr Alloys Using the Potts-Phase Field Modeling Technique
Source abstract
Abstract
U-Pu-Zr alloys are considered ideal metallic fuels for experimental breeder reactors because of their superior material properties and potential for increased burnup performance. However, significant constituent redistribution has been observed in these alloys when irradiated, or subject to a thermal gradient, resulting in inhomogeneity of both composition and phase, which, in turn, alters the fuel performance. The hybrid Potts-phase field method is reformulated for ternary alloys in a thermal gradient and utilized to simulate and predict constituent redistribution and phase transformations in the U-Pu-Zr nuclear fuel system. Simulated evolution profiles for the U-16Pu-23Zr (at. pct) alloy show concentric zones that are compared with published experimental results; discrepancies in zone size are attributed to thermal profile differences and assumptions related to the diffusivity values used. Twenty-one alloys, over the entire ternary compositional spectrum, are also simulated to investigate the effects of alloy composition on constituent redistribution and phase transformations. The U-40Pu-20Zr (at. pct) alloy shows the most potential for compositional uniformity and phase homogeneity, throughout a thermal gradient, while remaining in the compositional range of feasible alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. T.A. Lennox, D.N. Millington, and R.E. Sunderland: Prog Nucl Energ, 2007, vol. 49, pp. 589–96.10.1016/j.pnucene.2007.02.004 ↗
2. V. Ivanchenko and T. Pryadko: in Non-Ferrous Metal Systems. Part 4, G. Effenberg and S. Ilyenko, eds., Springer, Berlin 2007, pp. 454–72.
3. B.R. Seidel, L.C. Walters, and Y.I. Chang: JOM-J Met, 1987, vol. 39, pp. 10–13.10.1007/BF03258852 ↗
4. R.D. Leggett and L.C. Walters: J Nucl Mater, 1993, vol. 204, pp. 23–32.10.1016/0022-3115(93)90195-5 ↗
5. D.C. Crawford, D.L. Porter, and S.L. Hayes: J Nucl Mater, 2007, vol. 371, pp. 202–31.10.1016/j.jnucmat.2007.05.010 ↗
6. M.K. Meyer, S.L. Hayes, W.J. Carmack, and H. Tsai: J Nucl Mater, 2009, vol. 392, pp. 176–83.10.1016/j.jnucmat.2009.03.041 ↗
7. L. Capriotti, S. Brémier, K. Inagaki, P. Pöml, D. Papaioannou, H. Ohta, T. Ogata, and V.V. Rondinella: Prog Nucl Energ, 2017, vol. 94, pp. 194–201.10.1016/j.pnucene.2016.04.004 ↗
8. W.J. Carmack, D.L. Porter, Y.I. Chang, S.L. Hayes, M.K. Meyer, D.E. Burkes, C.B. Lee, T. Mizuno, F. Delage, and J. Somers: J Nucl Mater, 2009, vol. 392, pp. 139–50.10.1016/j.jnucmat.2009.03.007 ↗
9. J. Vujić, R.M. Bergmann, R. Škoda, and M. Miletić: Energy, 2012, vol. 45, pp. 288–95.10.1016/j.energy.2012.01.078 ↗
10. R.G. Pahl, D.L. Porter, D. C. Crawford, and L.C. Walters: J Nucl Mater, 1992, vol. 188, pp. 3–9.10.1016/0022-3115(92)90447-S ↗
11. L.C. Walters: J Nucl Mater, 1999, vol. 270, pp. 39–48.10.1016/S0022-3115(98)00760-0 ↗
12. T. Ogata: in Comprehensive Nuclear Materials, Rudy J M Konings, ed., Elsevier, Amsterdam, 2011, pp. 1–40.10.1016/B978-0-08-056033-5.00049-5 ↗
13. G.L. Hofman, L.C. Walters, and T.H. Bauer: Prog Nucl Energ, 1997, vol. 31, pp. 83–110.10.1016/0149-1970(96)00005-4 ↗
14. R.G. Pahl, C.E. Lahm, R. Villareal, W.N. Beck, and G.L. Hofman: in International Conference on Reliable Fuels for Liquid Metal Reactors, Tuscon, AZ, 1986, pp. 36–51.
15. W.F. Murphy, W.N. Beck, F.L. Brown, B.J. Koprowski, and L.A. Neimark: Postirradiation Examination of U-Pu-Zr Fuel Elements Irradiated in EBR-II to 4.5 Atomic Percent Burnup, Argonne National Laboratory, Report ANL-7602, 1969.
16. Y.S. Kim, G.L. Hofman, S.L. Hayes, and Y.H. Sohn: J Nucl Mater, 2004, vol. 327, pp. 27–36.10.1016/j.jnucmat.2004.01.012 ↗
17. Y.S. Kim and G.L. Hofman: AAA Fuels Handbook, Argonne National Laboratory, Report ANL-AAA-068, 2003.10.2172/822554 ↗
18. S. Kaity, J. Banerjee, M.R. Nair, K. Ravi, S. Dash, T.R.G. Kutty, A. Kumar, and R.P. Singh: J Nucl Mater, 2012, vol. 427, pp. 1–11.10.1016/j.jnucmat.2012.03.045 ↗
19. Y.S. Kim, T.W. Cho, and D.-S. Sohn: J Nucl Mater, 2014, vol. 445, pp. 272–80.10.1016/j.jnucmat.2013.11.018 ↗
20. T. Ogawa, T. Iwai, and M. Kurata: J Less-Common Met, 1991, vol. 175, pp. 59–69.10.1016/0022-5088(91)90349-9 ↗
21. G.P. Marino: Nucl Sci Eng, 1972, vol. 49, pp. 93–98.10.13182/NSE72-A22530 ↗
22. M. Ishida, T. Ogata, and M. Kinoshita: Nucl Technol, 1993, vol. 104, pp. 37–51.10.13182/NT93-A34868 ↗
23. Y.S. Kim, S.L. Hayes, G.L. Hofman, and A.M. Yacout: J Nucl Mater, 2006, vol. 359, pp. 17–28.10.1016/j.jnucmat.2006.07.013 ↗
24. T. Ogata, Y.S. Kim, and A.M. Yacout: in Comprehensive Nuclear Materials, R.J.M. Konings, ed., Elsevier, Amsterdam, 2012, pp. 713–53.10.1016/B978-0-08-056033-5.00075-6 ↗
25. R.L. Williamson, J.D. Hales, S.R. Novascone, M.R. Tonks, D.R. Gaston, C.J. Permann, D. Andrs, and R.C. Martineau: J Nucl Mater, 2012, vol. 423, pp. 149–63.10.1016/j.jnucmat.2012.01.012 ↗
26. J. Galloway, C. Unal, N. Carlson, D. Porter, and S. Hayes: Nucl Eng Des, 2015, vol. 286, pp. 1–17.10.1016/j.nucengdes.2015.01.014 ↗
27. E.R. Homer, V. Tikare, and E.A. Holm: Comp Mat Sci, 2013, vol. 69, pp. 414–23.10.1016/j.commatsci.2012.11.056 ↗
28. M. Kurata: IOP Conference Series: Materials Science and Engineering, 2010, vol. 9, p. 012022.10.1088/1757-899X/9/1/012022 ↗
29. J.W. Cahn and J.E. Hilliard: J Chem Phys, 1958, vol. 28, pp. 258–67.10.1063/1.1744102 ↗
30. J.J. Cox, E.R. Homer, and V. Tikare: Mater Res Soc Symp Proc, 2013, vol. 1524, p. 165.10.1557/opl.2013.165 ↗
31. K.G.F. Janssens, D. Raabe, E. Kozeschnik, M.A. Miodownik, and B. Nestler: Computational Materials Engineering: An Introduction to Microstructure Evolution, Academic Press, Boston, 2007.
32. M. Hillert: Phase Equilibria, Phase Diagrams and Phase Transformations, Cambridge University Press, Cambridge, 2007.10.1017/CBO9780511812781 ↗
33. L. Zhang, M.R. Tonks, P.C. Millett, Y. Zhang, K. Chockalingam, and B. Biner: Comp Mat Sci, 2012, vol. 56, pp. 161–65.10.1016/j.commatsci.2012.01.002 ↗
34. H. Emmerich: The Diffuse Interface Approach in Materials Science, Springer-Verlag, Berlin, 2003.
35. R.W. Balluffi, S.M. Allen, and W.C. Carter: Kinetics of Materials, John Wiley & Sons, Hoboken, 2005.10.1002/0471749311 ↗
36. P.G. Shewmon: Diffusion in Solids, McGraw-Hill, New York, 1963.
37. H.L. Lukas, S.G. Fries, and B. Sundman: Computational Thermodynamics, Cambridge University Press, Cambridge, 2007.10.1017/CBO9780511804137 ↗
38. D. Yun, J. Rest, G.L. Hofman, and A.M. Yacout: J Nucl Mater, 2013, vol. 435, pp. 153–63.10.1016/j.jnucmat.2012.12.024 ↗
39. A. Karahan and N.C. Andrews: Nucl Eng Des, 2013, vol. 258, pp. 26–34.10.1016/j.nucengdes.2013.02.004 ↗
40. [40] F.N. Kryukov, O.N. Nikitin, S.V. Kuzmin, A.V. Belyaeva, I.F. Gilmutdinov, P.I. Grin, and I. Yu Zhemkov: IOP Conference Series: Materials Science and Engineering, 2017, vol. 168, p. 012029.10.1088/1757-899X/168/1/012029 ↗
41. A. Aitkaliyeva, J.W. Madden, B.D. Miller, C.A. Papesch, and J.I. Cole: Metall Mater Trans E, 2015, vol. 2, pp. 220–28.
42. C. Matthews, C. Unal, J. Galloway, D.D. Keiser Jr., and S.L. Hayes: Nucl Technol, 2017, vol. 198, pp. 231–59.10.1080/00295450.2017.1323535 ↗
43. D.E. Janney, J.R. Kennedy, J.W. Madden, and T.P. O’Holleran: J Nucl Mater, 2014, vol. 448, pp. 109–12.10.1016/j.jnucmat.2014.01.044 ↗
44. A. Aitkaliyeva, J.W. Madden, C.A. Papesch, and J.I. Cole: J Nucl Mater, 2016, vol. 473, pp. 75–82.10.1016/j.jnucmat.2016.02.022 ↗
45. D.E. Janney, J.R. Kennedy, J.W. Madden, and T.P. O’Holleran: J Nucl Mater, 2015, vol. 456, pp. 46–53.10.1016/j.jnucmat.2014.08.051 ↗
46. D.E. Janney and B.H. Sencer: J Nucl Mater, 2017, vol. 486, pp. 66–69.10.1016/j.jnucmat.2017.01.003 ↗
47. Y. Shibuta, T. Sato, T. Suzuki, H. Ohta, and M. Kurata: J Nucl Mater, 2013, vol. 436, pp. 61–67.10.1016/j.jnucmat.2013.01.299 ↗
48. D.A. Cogswell and W.C. Carter: Phys Rev E, 2011, vol. 83, p. 061602.10.1103/PhysRevE.83.061602 ↗
49. G. Gottstein and L.S. Shvindlerman: Grain Boundary Migration in Metals, CRC Press, Boca Raton, 2010.
50. S.J. Plimpton, C.C. Battaile, M. Chandross, E.A. Holm, A. Thompson, V. Tikare, G. Wagner, E. Webb, and X. Zhou: Sandia National Laboratories, Report SAND2009–6226, 2009.
51. R.G. Pahl, D.L. Porter, C.E. Lahm, and G.L. Hofman: Metall Trans A, 1990, vol. 21, pp. 1863–70.10.1007/BF02647233 ↗
52. D.L. Porter, C.E. Lahm, and R.G. Pahl: Metall Trans A, 1990, vol. 21, pp. 1871–76.10.1007/BF02647234 ↗
53. Y.H. Sohn, M.A. Dayananda, G.L. Hofman, R.V. Strain, and S.L. Hayes: J Nucl Mater, 2000, vol. 279, pp. 317–29.10.1016/S0022-3115(99)00290-1 ↗
54. D.E. Burkes, J.R. Kennedy, T. Hartmann, C.A. Papesch, and D.D. Keiser Jr: J Nucl Mater, 2010, vol. 396, pp. 49–56.10.1016/j.jnucmat.2009.10.053 ↗
55. G.L. Hofman, R.G. Pahl, C.E. Lahm, and D.L. Porter: Metall Trans A, 1990, vol. 21, pp. 517–28.10.1007/BF02671924 ↗