Corrosion and Mechanical Properties of Al-5 At. Pct Cr Produced by Cryomilling and Subsequent Consolidation at Various Temperatures
Source abstract
Abstract
An Al-5 at. pct Cr alloy was produced by high-energy ball milling at liquid nitrogen temperature followed by consolidation using equal-channel axial extrusion at 200 °C, 300 °C and 450 °C. The microstructure and corrosion response were compared with a cast alloy of the same composition. Rather than the intermetallics expected by the phase diagram and seen in the cast alloy, consolidated HEBM alloys exhibited extended solid solubility of Cr in the aluminum matrix in addition to a finely dispersed Cr-rich phase. This led to improvement in the corrosion behavior as investigated via potentiodynamic polarization and constant immersion tests in NaCl solution. Hardness and tensile tests were performed to evaluate the mechanical properties. The highest consolidation temperature (450 °C) contributed to significant grain growth and Cr diffusion, lessening the beneficial effects of processing with HEBM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R.K. Gupta, N.L. Sukiman, M.K. Cavanaugh, B.R.W. Hinton, C.R. Hutchinson, and N. Birbilis: Electrochim. Acta, 2012, vol. 66, pp. 245–54.10.1016/j.electacta.2012.01.090 ↗
2. N. Birbilis and R.G. Buchheit: J. Electrochem. Soc., 2005, vol. 152, p. B140.10.1149/1.1869984 ↗
3. R.K. Gupta, A. Deschamps, M.K. Cavanaugh, S.P. Lynch, and N. Birbilis: J. Electrochem. Soc., 2012, vol. 159, pp. C492–502.10.1149/2.062211jes ↗
4. J.R. Davis: Corrosion of Aluminum and Aluminum Alloys, ASM International, 1999.10.31399/asm.tb.caaa.9781627082990 ↗
5. I. Polmear and D.S. John: Light Alloys: From Traditional Alloys to Nanocrystals, Butterworth-Heinemann, Oxford, 2005.
6. K.D. Ralston and N. Birbilis: Corrosion, 2010, vol. 66, p. 75005.10.5006/1.3462912 ↗
7. R.K. Gupta, N.L. Sukiman, K.M. Fleming, M. A. Gibson, and N. Birbilis: ECS Electrochem. Lett., 2012, vol. 1, pp. 1–3.10.1149/2.002201eel ↗
8. J. Esquivel, H. Murdoch, K. Darling, and R. Gupta: Mater. Res. Lett., 2018, vol. 6, pp. 79–83.10.1080/21663831.2017.1396262 ↗
9. W.C. Moshier, G.D. Davis, J.S. Ahearn, and H.F. Hough: 1986, vol. 134, pp. 2677–84.10.1149/1.2100271 ↗
10. B.A. Shaw, G.D. Davis, T.L. Fritz, B.j.Rees, and W.C. Moshier: J. Electrochem. Soc., 1991, vol. 138, pp. 3288–95.10.1149/1.2085404 ↗
11. W.C. Moshier, G.D. Davis, and G.O. Cote: J. Electrochem. Soc., 1989, vol. 136, pp. 356–62.10.1149/1.2096635 ↗
12. G.S. Frankel, R.C. NewMan, C. V. Jahnes, and M.A. Russak: J. Electrochem. Soc., 1993, vol. 140, p. 2192.10.1149/1.2220794 ↗
13. G.S. Frankel: J. Electrochem. Soc., 1989, vol. 136, p. 1243.10.1149/1.2096864 ↗
14. W. Cao, S.-L. Chen, F. Zhang, K. Wu, Y. Yang, Y.A. Chang, R. Schmid-Fetzer, and W.A. Oates: Calphad, 2009, vol. 33, pp. 328–42.10.1016/j.calphad.2008.08.004 ↗
15. K.D. Ralston, D. Fabijanic, and N. Birbilis: Electrochim. Acta, 2011, vol. 56, pp. 1729–36.10.1016/j.electacta.2010.09.023 ↗
16. R.K. Gupta and N. Birbilis: Corros. Sci., 2015, vol. 92, pp. 1–15.10.1016/j.corsci.2014.11.041 ↗
17. M. Mehmood, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corros. Sci., 1998, vol. 41, pp. 477–99.10.1016/S0010-938X(98)00130-9 ↗
18. R.K. Gupta, D. Fabijanic, R. Zhang, and N. Birbilis: Corros. Sci., 2015, vol. 98, pp. 643–50.10.1016/j.corsci.2015.06.011 ↗
19. R.K. Gupta, D. Fabijanic, T. Dorin, Y. Qiu, J.T. Wang, and N. Birbilis: Mater. Des., 2015, vol. 84, pp. 270–6.10.1016/j.matdes.2015.06.120 ↗
20. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
21. B. Srinivasarao, C. Suryanarayana, K. Oh-Ishi, and K. Hono: Mater. Sci. Eng. A, 2009, vol. 518, pp. 100–7.10.1016/j.msea.2009.04.032 ↗
22. D.K. Mukhopadhyay, C. Suryanarayana, and F.H.S. Froes: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1939–46.10.1007/BF02670665 ↗
23. R. Gupta, R.K.S. Raman, and C.C. Koch: Mater. Sci. Eng. A, 2008, vol. 494, pp. 253–56.10.1016/j.msea.2008.04.019 ↗
24. R.K. Gupta, R.K.S. Raman, C.C. Koch, and B.S. Murty: Int. J. Electrochem. Sci, 2013, vol. 8, pp. 6791–806.10.1016/S1452-3981(23)14806-1 ↗
25. C.C. Koch, R.O. Scattergood, K.A. Darling, and J.E. Semones: J. Mater. Sci., 2008, vol. 43, pp. 7264–72.10.1007/s10853-008-2870-0 ↗
26. J. Esquivel and R.K. Gupta: Acta Metall. Sin. 2017, vol. 30, pp. 333–41.10.1007/s40195-017-0550-2 ↗
27. B.D. Cullity and S.R. Stock: Element of X-Ray Diffraction, Addition–Wesley, Addison-Wesley, Reading, MA, 1978.
28. R.E. Reed-Hill and R. Abbaschian: Physical Metallurgy Principles, Van Nostrand: New York, 1973.
29. H.S. Kim: Mater. Sci. Eng. A, 2000, vol. 289, pp. 30–3.10.1016/S0921-5093(00)00909-6 ↗
30. W.F. Smith: Structure and Properties of Engineering Alloys. McGraw-Hill: New York, 1993.
31. N.N. Krishna, R. Tejas, K. Sivaprasad, and K. Venkateswarlu: Mater. Des., 2013, vol. 52, pp. 785–90.10.1016/j.matdes.2013.05.095 ↗
32. K.A. Darling, A.J. Roberts, L. Armstrong, D. Kapoor, M.A. Tschopp, L.J. Kecskes, and S.N. Mathaudhu: Mater. Sci. Eng. A, 2014, vol. 589, pp. 57–65.10.1016/j.msea.2013.09.047 ↗
33. R.W. Hayes, D. Witkin, F. Zhou, and E.J. Lavernia: Acta Mater., 2004, vol. 52, pp. 4259–71.10.1016/j.actamat.2004.05.042 ↗
34. B. Holmedal, E. Nes, and H. Ekstro: 2006, vol. 37, pp. 1999–2006.10.1007/s11661-006-0142-7 ↗
35. P.G. Partridge and M.C. McConnell: Acta Metall., 1987, vol. 35, pp. 1981–93.10.1016/0001-6160(87)90027-7 ↗