journal article·2018-06Open access

Hot Deformation Behavior and Processing Maps of Diamond/Cu Composites

Hongdi Zhang, Yue Liu, Fan Zhang, Di Zhang, Hanxing Zhu, Tongxiang Fan

Abstract

The hot deformation behaviors of 50 vol pct uncoated and Cr-coated diamond/Cu composites were investigated using hot isothermal compression tests under the temperature and strain rate ranging from 1073 K to 1273 K (800 C to 1000 C) and from 0.001 to 5 s1, respectively. Dynamic recrystallization was determined to be the primary restoration mechanism during deformation. The Cr3C2 coating enhanced the interfacial bonding and resulted in a larger flow stress for the Cr-coated diamond/Cu composites. Moreover, the enhanced interfacial affinity led to a higher activation energy for the Cr-coated diamond/Cu composites (238 kJ/mol) than for their uncoated counterparts (205 kJ/mol). The strain-rate-dependent constitutive equations of the diamond/Cu composites were derived based on the Arrhenius model, and a high correlation (R = 0.99) was observed between the calculated flow stresses and experimental data. With the help of processing maps, hot extrusions were realized at 1123 K/0.01 s1 and 1153 K/0.01 s1 (850 C/0.01 s1 and 880 C/0.01 s1) for the uncoated and coated diamond/Cu composites, respectively. The combination of interface optimization and hot extrusion led to increases of the density and thermal conductivity, thereby providing a promising route for the fabrication of diamond/Cu composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A.L. Moore and L. Shi: Mater. Today, 2014, vol. 17, pp. 163-74.10.1016/j.mattod.2014.04.003 ↗
2. J. Cho and K.E. Goodson: Nature Mater., 2015, vol. 14, pp. 136-37.10.1038/nmat4194 ↗
3. S. Mallik, N. Ekere, C. Best and R. Bhatti: Appl. Therm. Eng., 2011, vol. 31, pp. 355-62.10.1016/j.applthermaleng.2010.09.023 ↗
4. Christian Monachon and Ludger Weber: Acta Mater., 2014, vol. 73, pp. 337-46.10.1016/j.actamat.2014.04.024 ↗
5. Andrey M. Abyzov, Fedor M. Shakhov, Andrey I. Averkin and Vladimir I. Nikolaev: Mater. Design, 2015, vol. 87, pp. 527-39.10.1016/j.matdes.2015.08.048 ↗
6. T. Schubert, Ł. Ciupiński, W. Zieliński, A. Michalski, T. Weißgärber and B. Kieback: Scripta Mater., 2008, vol. 58, pp. 263-66.10.1016/j.scriptamat.2007.10.011 ↗
7. J.W. Li, X.T. Wang, Y. Qiao, Y. Zhang, Z.B. He and H.L. Zhang: Scripta Mater., 2015, vol. 109, pp. 72-75.10.1016/j.scriptamat.2015.07.022 ↗
8. Y. Zhang, H.L. Zhang, J.H. Wu and X.T. Wang: Scripta Mater., 2011, vol. 65, pp. 1097-1100.10.1016/j.scriptamat.2011.09.028 ↗
9. Q.P. Kang, X.B. He, S.B. Ren, L. Zhang, M. Wu, C.Y. Guo, W. Cui and X.H. Qu: Appl. Therm. Eng., 2013, vol. 60, pp. 423-29.10.1016/j.applthermaleng.2013.05.038 ↗
10. J.M. Molina-Jordá: Acta Mater., 2015, vol. 96, pp. 101-10.10.1016/j.actamat.2015.06.003 ↗
11. W.L. Yang, L.P. Zhou, K. Peng, J.J. Zhu and L. Wan: Compos. B, 2013, vol. 55, pp. 1-4.10.1016/j.compositesb.2013.05.023 ↗
12. S.B. Ren, X.Y. Shen, C.Y. Guo, N. Liu, J.B. Zang, X.B. He and X.H. Qu: Compos. Sci. Technol., 2011, vol. 71, pp. 1550-55.10.1016/j.compscitech.2011.06.012 ↗
13. K. Chu, Z.F. Liu, C.C. Jia, H. Chen, X.B. Liang, W.J. Gao, W.H. Tian and H. Guo: J. Alloy. Compd., 2010, vol. 490, pp. 453-58.10.1016/j.jallcom.2009.10.040 ↗
14. R. Liu, W. Cao, T.X. Fan, C.F. Zhang and D. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4687-93.10.1016/j.msea.2010.03.095 ↗
15. Peng Jin, Bolu Xiao, Quanzhao Wang, Zongyi Ma, Yue Liu and Shu Li: J. Mater. Sci. Technol., 2011, vol. 27, pp. 518-24.10.1016/S1005-0302(11)60101-1 ↗
16. Soon H. Hong, Kyung H. Chung and Chi H. Lee: Mater. Sci. Eng. A, 1996, vol. 206, pp. 225-32.10.1016/0921-5093(95)09996-4 ↗
17. A. S. Hamada, A. Khosravifard, A. P. Kisko, E. Ahmed and D. A. Porter: Mater. Sci. Eng. A, 2016, vol. 669, pp. 469-79.10.1016/j.msea.2016.03.084 ↗
18. Yu-Li Li, Wen-Xian Wang, Jun Zhou and Hong-Sheng Chen: Mater. Charact., 2017, vol. 124, pp. 107-16.10.1016/j.matchar.2016.12.014 ↗
19. Shuang Chen, Jie Teng, Haibo Luo, Yu Wang and Hui Zhang: Mater. Sci. Eng. A, 2017, vol. 697, pp. 194-202.10.1016/j.msea.2017.05.016 ↗
20. M. Rajamuthamilselvan and S. Ramanathan: J. Mater. Eng. Perform., 2011, vol. 21, pp. 191-96.10.1007/s11665-011-9871-x ↗
21. C.M. Sellars and W.J. Mctegart: Acta Metall., 1966, vol. 14, pp. 1136-38.10.1016/0001-6160(66)90207-0 ↗
22. Sudipta Patra, Abhijit Ghosh, Lokesh Kumar Singhal, Arijit Saha Podder, Jagmohan Sood, Vinod Kumar and Debalay Chakrabarti: Metallurgical and Materials Transactions A, 2016, vol. 48, pp. 294-313.10.1007/s11661-016-3759-1 ↗
23. Yuanbiao Tan, Liyuan Ji, Jingli Duan, Wenchang Liu, Jingwu Zhang and Riping Liu: Metallurgical and Materials Transactions A, 2016, vol. 47, pp. 5974-84.10.1007/s11661-016-3703-4 ↗
24. Shiwen Du, Shuangmei Chen, Jianjun Song and Yongtang Li: Metallurgical and Materials Transactions A, 2017, vol. 48, pp. 1310-20.10.1007/s11661-016-3938-0 ↗
25. E. I. Poliak and J. J. Jonas: Acta Mater., 1996, vol. 44, pp. 127-36.10.1016/1359-6454(95)00146-7 ↗
26. Justyna Grzonka, Mirosław J. Kruszewski, Marcin Rosiński, Łukasz Ciupiński, Andrzej Michalski and Krzysztof J. Kurzydłowski: Mater. Charact., 2015, vol. 99, pp. 188-94.10.1016/j.matchar.2014.11.032 ↗
27. X.Y. Shen, X.B. He, S.B. Ren, H.M. Zhang and X.H. Qu: J. Alloy. Compd., 2012, vol. 529, pp. 134-39.10.1016/j.jallcom.2012.03.045 ↗
28. B.K. Raghunath, K. Raghukandan, R. Karthikeyan, K. Palanikumar, U.T.S. Pillai, R. AshokGandhi: J. Alloys Compd., 2011, vol. 509, pp. 4992-98.10.1016/j.jallcom.2011.01.182 ↗
29. Y. Kim, S.H. Lee, S. Lee and J.W. Noh: Mater. Sci. Eng. A, 2012, vol. 552, pp. 276-82.10.1016/j.msea.2012.05.040 ↗
30. J.Q. Zhang, H.S. Di, X.Y. Wang, Y. Cao, J.C. Zhang and T.J. Ma: Mater. Design, 2013, vol. 44, pp. 354-64.10.1016/j.matdes.2012.08.004 ↗
31. J.Q. Zhang, H.S. Di, K. Mao, X.Y. Wang, Z.J. Han and T.J. Ma: Mater. Sci. Eng. A, 2013, vol. 587, pp. 110-22.10.1016/j.msea.2013.08.036 ↗
32. John J. Jonas, Xavier Quelennec, Lan Jiang and Étienne Martin: Acta Mater., 2009, vol. 57, pp. 2748-56.10.1016/j.actamat.2009.02.033 ↗
33. R. S. Mishra, T. R. Bieler and A. K. Mukherjee: Acta Metall. Mater., 1995, vol. 43, pp. 877-91.10.1016/0956-7151(94)00323-A ↗
34. M. Hörnqvist, N. Mortazavi, M. Halvarsson, A. Ruggiero, G. Iannitti and N. Bonora: Acta Mater., 2015, vol. 89, pp. 163-8010.1016/j.actamat.2015.01.053 ↗
35. Y. Li and T. G. Langdon: Acta Mater., 1998, vol. 46, pp. 3937-48.10.1016/S1359-6454(98)00073-1 ↗
36. S. Gangolu, A. G. Rao, N. Prabhu, V. P. Deshmukh and B. P. Kashyap: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1366-73.10.1007/s11665-014-0891-1 ↗
37. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark and D.R. Barker: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 1883-92.10.1007/BF02664902 ↗
38. Y.V.R.K. Prasad, K.P. Rao and S. Sasidhara: Hot working guide: A compendium of processing maps. ASM International, Materials Park, Ohio, 1997.
39. O. Sivakesavam and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 2002, vol. A323, pp. 270-77.10.1016/S0921-5093(01)01392-2 ↗