Microstructural Evolution of AerMet100 Steel Coating on 300M Steel Fabricated by Laser Cladding Technique
Source abstract
Abstract
In this paper, the process of coating AerMet100 steel on forged 300M steel with laser cladding was investigated, with a thorough analysis of the chemical composition, microstructure, and hardness of the substrate and the cladding layer as well as the transition zone. Results show that the composition and microhardness of the cladding layer are macroscopically homogenous with the uniformly distributed bainite and a small amount of retained austenite in martensite matrix. The transition zone, which spans approximately 100 μm, yields a gradual change of composition from the cladding layer to 300M steel matrix. The heat-affected zone (HAZ) can be divided into three zones: the sufficiently quenched zone (SQZ), the insufficiently quenched zone (IQZ), and the high tempered zone (HTZ). The SQZ consists of martensitic matrix and bainite, as for the IQZ and the HTZ the microstructures are martensite + tempered martensite and tempered martensite + ferrite, respectively. These complicated microstructures in the HAZ are caused by different peak heating temperatures and heterogeneous microstructures of the as-received 300M steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Tomita Y: Journal of Materials Science, 1993,Vol. 28,PP. 853-59.10.1007/BF00400864 ↗
2. Tomita Y, Okawa T: Materials Science and Engineering: A, 1993,Vol. 172,PP. 145-51.10.1016/0921-5093(93)90434-G ↗
3. Zhang G, Yang X, He X, Li J, Hu H: Materials & Design, 2013,Vol. 45,PP. 56-66.10.1016/j.matdes.2012.09.004 ↗
4. J. L. Youngblood, Raghavan M: Metallurgical Transactions A, 1977,Vol. 8,PP. 1439-48.10.1007/BF02642857 ↗
5. B.D. Sartwell, K. Legg, B. Bodger: HVOF thermal spray coatings as an alternative to hard chrome plating on military and commercial aircraft. AESF/EPA conference for environmental excellence 1999. pp. 1-20.
6. Kesong Z, Chunming D, Min L, Jinbing S, Changguang D: Rare Metal Materials and Engineering, 2009,Vol. 4,PP. 023.
7. Ibrahim A, Berndt CC: Materials Science and Engineering: A, 2007,Vol. 456,PP. 114-19.10.1016/j.msea.2006.12.030 ↗
8. Figueroa D, Robinson MJ: Corrosion Science, 2010,Vol. 52,PP. 1593-602.10.1016/j.corsci.2010.01.001 ↗
9. Townsend HE: Metallurgical Transactions A, 1975,Vol. 6,PP. 877-83.10.1007/BF02672311 ↗
10. Bechtle S, Kumar M, Somerday BP, Launey ME, Ritchie RO: Acta Materialia, 2009,Vol. 57,PP. 4148-57.10.1016/j.actamat.2009.05.012 ↗
11. Manigandan K, Srivatsan TS, Tammana D, Poorganji B, Vasudevan VK: Materials Science and Engineering: A, 2014,Vol. 601,PP. 29-39.10.1016/j.msea.2014.01.094 ↗
12. Ran X, Liu D, Li A, Wang H, Tang H, Cheng X: Materials Science and Engineering: A, 2016,Vol. 663,PP. 69-77.10.1016/j.msea.2016.03.051 ↗
13. Hu YB, Dong CF, Sun M, Xiao K, Zhong P, Li XG: Corrosion Science, 2011,Vol. 53,PP. 4159-65.10.1016/j.corsci.2011.08.024 ↗
14. Malakondaiah G, Srinivas M, Rao PR: Progress in Materials Science, 1997,Vol. 42,PP. 209-42.10.1016/S0079-6425(97)00016-9 ↗
15. Liu J, Li J, Cheng X, Wang H: Surface and Coatings Technology, 2017,Vol. 325,PP. 352-59.10.1016/j.surfcoat.2017.04.035 ↗
16. Pei Y, De Hosson JTM: Acta materialia, 2000,Vol. 48,PP. 2617-24.10.1016/S1359-6454(00)00065-3 ↗
17. Gu DD, Meiners W, Wissenbach K, Poprawe R: International Materials Reviews, 2012,Vol. 57,PP. 133-64.10.1179/1743280411Y.0000000014 ↗
18. Wang AA, Sircar S, Mazumder J: Journal of Materials Science, 1993,Vol. 28,PP. 5113-22.10.1007/BF00570050 ↗
19. Emamian A, Alimardani M, Khajepour A: Applied Surface Science, 2012,Vol. 258,PP. 9025-31.10.1016/j.apsusc.2012.05.143 ↗
20. Mioković T, Schulze V, Vöhringer O, Löhe D: Acta Materialia, 2007,Vol. 55,PP. 589-99.10.1016/j.actamat.2006.08.052 ↗
21. Lourenço JM, Sun SD, Sharp K, Luzin V, Klein AN, Wang CH, Brandt M: International Journal of Fatigue, 2016,Vol. 85,PP. 18-30.10.1016/j.ijfatigue.2015.11.021 ↗
22. Sun SD, Liu Q, Brandt M, Luzin V, Cottam R, Janardhana M, Clark G: Materials Science and Engineering: A, 2014,Vol. 606,PP. 46-57.10.1016/j.msea.2014.03.077 ↗
23. Hofman JT, de Lange DF, Pathiraj B, Meijer J: Journal of Materials Processing Technology, 2011,Vol. 211,PP. 187-96.10.1016/j.jmatprotec.2010.09.007 ↗
24. Kou S. Welding metallurgy. New Jersey: Wiley-Interscience; 2003.
25. David SA, Vitek JM: International Materials Reviews, 1989,Vol. 34,PP. 213-45.10.1179/imr.1989.34.1.213 ↗
26. Mortezaie A, Shamanian M: International Journal of Pressure Vessels and Piping, 2014,Vol. 116,PP. 37-46.10.1016/j.ijpvp.2014.01.002 ↗
27. Sexton L, Lavin S, Byrne G, Kennedy A: Journal of Materials Processing Technology, 2002,Vol. 122,PP. 63-68.10.1016/S0924-0136(01)01121-9 ↗
28. Chen S, Li L, Chen Y, Huang J: Journal of Alloys and Compounds, 2011,Vol. 509,PP. 891-98.10.1016/j.jallcom.2010.09.125 ↗
29. Naffakh H, Shamanian M, Ashrafizadeh F: Journal of Materials Processing Technology, 2009,Vol. 209,PP. 3628-39.10.1016/j.jmatprotec.2008.08.019 ↗
30. Soysal T, Kou S, Tat D, Pasang T: Acta Materialia, 2016,Vol. 110,PP. 149-60.10.1016/j.actamat.2016.03.004 ↗
31. Weiss B, Minkoff I, Soundry J, Ornath F: WELDING J, 1981,Vol. 60,PP. 227.
32. Das D, Dutta AK, Ray KK: Materials Science and Engineering: A, 2010,Vol. 527,PP. 2182-93.10.1016/j.msea.2009.10.070 ↗
33. Hwang S-H, Song J-H, Kim Y-S: Materials Science and Engineering: A, 2005,Vol. 390,PP. 437-43.10.1016/j.msea.2004.08.062 ↗
34. H. Bhadeshia, R. Honeycombe: Steels: microstructure and properties: microstructure and properties: Butterworth-Heinemann; 2011.
35. Suresh S: Science, 2001,Vol. 292,PP. 2447-51.10.1126/science.1059716 ↗
36. Lee S, Kim BC, Lee DY: Scripta Metallurgica, 1989,Vol. 23,PP. 995-1000.10.1016/0036-9748(89)90284-6 ↗
37. Foret R, Million B, Svoboda M, Stránský K: Science and technology of welding and joining, 2001,Vol. 6,PP. 405-11.10.1179/stw.2001.6.6.405 ↗
38. Huang M, Wang dL: Metallurgical and materials transactions A, 1998,Vol. 29,PP. 3037-46.10.1007/s11661-998-0211-1 ↗
39. Khan SA, Bhadeshia HKDH: Metallurgical Transactions A, 1990,Vol. 21,PP. 859-75.10.1007/BF02656570 ↗
40. Grange R, Hribal C, Porter L: Metallurgical and Materials Transactions A, 1977,Vol. 8,PP. 1775-85.10.1007/BF02646882 ↗
41. Hwang S-H, Song J-H, Kim Y-S: Materials Science and Engineering: A, 2005,Vol. 390,PP. 437-43.10.1016/j.msea.2004.08.062 ↗
42. Abe F: Materials Science and Engineering: A, 2004,Vol. 387–389,PP. 565-69.10.1016/j.msea.2004.01.057 ↗
43. Mohandas T, Madhusudan Reddy G, Satish Kumar B: Journal of Materials Processing Technology, 1999,Vol. 88,PP. 284-94.10.1016/S0924-0136(98)00404-X ↗