journal article·2017-10Open access

Influence of Heat Treatment on the Surface Structure of 6082 Al Alloys

N. Bayat, T. Carlberg

Abstract

Abstract The β-Al5FeSi intermetallic phase and coarse Mg2Si particles have negative effects on extrudability and workability of 6xxx Al alloys billets. To achieve extruded products with a high surface quality, the as-cast billets are heat-treated before extrusion. During heat treatment, the undesired intermetallic particles, i.e., β-AlFeSi platelets are transformed to rounded α-Al(FeMn)Si intermetallic phases. Although the heat treatment of the bulk areas of the 6xxx Al alloys has been the focus of many previous studies, the process of phase transformation at the very surface has not been paid the same attention. In this study, microstructures of a homogenized billet of a 6082 alloy at the area very close to the surface were investigated. By comparing the X-ray diffraction patterns (XRD) of heat-treated samples as a function of different holding times, the gradual phase transformations could be followed, and using GDOES and map analysis by EDX, the alloying elemental redistribution was analyzed. Partial remelting and porosity growth was detected, and transformation rates were faster than in bulk material and from what is known from industrial processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. [1] J.H. Li, A. Wimmer, G. Dehm, P. Schumacher, Philosophical Magazine, 2014, vol. 94, No. 8, pp. 830-46.10.1080/14786435.2013.868943 ↗
2. [2] N.C.W. Kuijpers, W.H. Kool, P.T.G. Koenis, K.E. Nilsen, I. Todd, S. Zwaag, Mater. Charact., 2003, vol. 49, pp. 409-20.10.1016/S1044-5803(03)00036-6 ↗
3. [3] G. Sha, K. O’Reilly, B. Cantor, J. Worth, R. Hamerton, Mater. Sci. Eng. A, 2001, vol. 304-306, pp. 612-16.10.1016/S0921-5093(00)01545-8 ↗
4. [4] G. Mrowka-Nowotnik, J. Sieniawski, J. Mater. Process. Technol., 2005, vol. 162-163, pp. 367-72.10.1016/j.jmatprotec.2005.02.115 ↗
5. [5] T. Smith, K. O’Reilly, S. Kumar, I. Stone, Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4866-71.10.1007/s11661-013-1934-1 ↗
6. [6] Y. Birol, Mater. Process. Technol., 2004, vol. 148, pp. 250-58.10.1016/j.jmatprotec.2004.01.056 ↗
7. [7] N.C.W. Kuijpers, F.J. Vermolen, K. Vuik, S. Zwaag, Mater. Trans., 2003, vol. 44, No.7, pp. 1448-56.10.2320/matertrans.44.1448 ↗
8. [8] D.T.L. Alexander, A.L. Greer, Acta Mater., 2002, vol. 50, pp. 2571-83.10.1016/S1359-6454(02)00085-X ↗
9. [9] S. Zajac, B. Hutchinson, A. Johansson, L.O. Gullman, Mater. Sci.Technol., 1994, vol. 10, pp. 323-33.10.1179/mst.1994.10.4.323 ↗
10. [10] Y. Birol, Mater. Charact., 2013, vol. 80, pp. 69-75.10.1016/j.matchar.2013.03.013 ↗
11. N. Bayat and T. carlberg: JOM, 2014, vol. 66, No. 5, pp. 700–10.10.1007/s11837-014-0950-y ↗
12. N. Bayat and T. Carlberg: IOP Conference Series, Mater. Sci. Eng., 2016, vol. 117, No. 1.10.1088/1757-899X/117/1/012038 ↗
13. J.C. McCubbin: Light Metal, TMS, 1975, pp. 756–67.
14. S. Benum, A. Håkonsen, and J. Sivertsen: Light Metal, TMS, 1999, pp. 737–42.
15. [15] A.L. Dons, Journal of Light Metals, 2001, vol. 1, pp. 133-49.10.1016/S1471-5317(01)00007-4 ↗
16. M. Erdegren and T. Carlberg: Light Metals, 2011, pp. 675–80.10.1002/9781118061992.ch118 ↗
17. [17] S. Kuypers, G. Buytaert, H. Terryn, Surf. . Interface Anal., 2004, vol. 36, pp. 833-36.10.1002/sia.1776 ↗
18. [18] J.T.B. Gundersen, A. Aytaça, S. Onob, J.H. Nordlienc, K. Nişancıoğlu, Corros. Sci., 2004, vol. 46, pp. 265-83.10.1016/S0010-938X(03)00159-8 ↗