Phase Equilibria in the Fe-Mo-Ti Ternary System at 1173 K (900 °C) and 1023 K (750 °C)
Source abstract
Abstract
Abstract Alloys with fine-scale eutectic microstructures comprising Ti-based A2 and TiFe B2 phases have been shown to have excellent mechanical properties. In this study, the potential of alloys with further refined A2-B2 microstructures formed through solid-state precipitation has been explored by analyzing a series of six alloys within the Fe-Mo-Ti ternary system. Partial isothermal sections of this system at 1173 K (900 °C) and 1023 K (750 °C) were constructed, from which the ternary solubility limits of the A2 (Ti, Mo), B2 TiFe, D85 Fe7Mo6, and C14 Fe2Ti phases were determined. With these data, the change in solubility of Fe in the A2 phase with temperature, which provides the driving force for precipitation of B2 TiFe, was determined and used to predict the maximum potential volume fraction of B2 TiFe precipitates that may be formed in an A2 (Ti, Mo) matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. D.V. Louzguine, H. Kato, and A. Inoue: J. Alloys Compd, 2004, vol. 384, pp. L1–L3.10.1016/j.jallcom.2004.03.114 ↗
2. D.V. Louzguine-Luzgin, L.V. Louzguina-Luzgina, H. Kato, and A. Inoue: J. Alloys Compd, 2007, vol. 434–435, pp. 32–35.10.1016/j.jallcom.2006.08.335 ↗
3. J. Das, K.B. Kim, F. Baier, W. Löser, A. Gebert, and J. Eckert: J. Alloys Compd, 2007, vol. 434–435, pp. 28–31.10.1016/j.jallcom.2006.08.163 ↗
4. J. Das, R. Theissmann, W. Löser, and J. Eckert: J. Mater. Res., 2010, vol. 25, pp. 943–56.10.1557/JMR.2010.0116 ↗
5. G.H. Cao, Y.F. Peng, N. Liu, X. Li, Z.S. Lei, Z.M. Ren, D. Gerthsen, and A.M. Russell: Mater. Sci. Eng. A, 2014, vol. 609A, pp. 60–6410.1016/j.msea.2014.04.088 ↗
6. A.J. Knowles, N.G. Jones, C.N. Jones, and H.J. Stone: The 13th World Conference on Titanium proceedings, 2015, pp. 1231–36. DOI:10.1002/9781119296126.ch20910.1002/9781119296126.ch209 ↗
7. Z.P. Jin, and C. Qiu: Metall. Trans. A., 1993, vol. 24A, pp. 2137–4410.1007/BF02648587 ↗
8. A.J. Knowles, N.G. Jones, O.M.D.M. Messé, J.S. Barnard, C.N. Jones, and H.J. Stone: Int. J. Refract. Met. Hard Mater., 2016, vol. 60, pp. 160–810.1016/j.ijrmhm.2016.07.008 ↗
9. V. Raghavan: J. Phase Equilib., 2003, vol. 24, pp. 182–8310.1361/105497103770330857 ↗
10. V. Raghavan: Phase Diagrams of Ternary Iron Alloys Part 6. Indian Institute of Metals, Calcutta, 1992, pp. 994–96
11. E.M. Sokolovskaya, E.F. Kazakova, B.I. Gryzunov, M. Duisebaev, and B.K. Konysova: Vestn. Mosk. Univ. Ser. 2: Khim., 1988, vol. 43, pp. 404–05
12. A. Kamegawa, H. Kudo, H. Takamura, and M. Okada: J. Jpn. Inst. Met. Mater., 2003, vol. 44, pp. 991–94
13. A.K. Shurin, G.P. Dmitrieva, and T.S. Cherepova: Powder Metall. Met. Ceram., 2003, vol. 42, pp. 513–1610.1023/B:PMMC.0000013224.57363.bb ↗
14. J. English: Binary and Ternary Phase Diagrams of Columbium, Molybdenum, Tantalum, and Tungsten, Defense Metals Information Center, 1961, pp. 150–52
15. G.I. Nosova, N.B. D’yakonova, and I.V. Lyasotskii: Met. Sci. Heat Treat., 2006, vol. 48, pp. 427–3210.1007/s11041-006-0111-1 ↗
16. S.K. Sikka, Y.K. Vohra, and R. Chidambaram: Prog. Mater Sci., 1982, vol. 27, pp. 245–31010.1016/0079-6425(82)90002-0 ↗
17. L.F.S. Dumitrescu, M. Hillert, and N. Sounders: J. Phase Equilib., 1998, vol. 19, pp. 441–4810.1361/105497198770341923 ↗
18. P. Franke, and D. Neuschütz: Binary Systems. Part 4: Binary Systems from Mn-Mo to Y-Zr - Mo-Ti. Springer, Berlin, 200610.1007/b76778 ↗
19. J. Houserová, J. Vřešťál, and M. Šob: Phase diagram calculations in the Co–Mo and Fe–Mo systems using first-principles results for the sigma phase. Calphad, 2005, vol. 29, pp. 133–3910.1016/j.calphad.2005.06.002 ↗
20. J.L. Murray: Bull. Alloy Phase Diagr., 1981, vol. 2, pp. 320–3410.1007/BF02868286 ↗
21. R.J. Van Thyne, H.D. Kessler, and M. Hansen: Trans. Am. Soc. Met., 1952, vol. 44, pp. 974–89
22. V.B. Rajkumar, and K.C.H. Kumar: J. Alloys Compd., 2014, vol. 611, pp. 303–1210.1016/j.jallcom.2014.05.030 ↗
23. C.P. Heijwegen, and G.D. Rieck: J. Less-Common Met., 1974, vol. 37, pp. 115–2110.1016/0022-5088(74)90012-5 ↗
24. H. Bo, J. Wang, L. Duarte, C. Leinenbach, L. Liu, H. Liu, Z. Jin: Trans. Nonferr Met. Soc. China., 2012, vol. 22, pp. 2204–1110.1016/S1003-6326(11)61450-7 ↗