journal article·2017-03

Effect of Purity Levels on the High-Temperature Deformation Characteristics of Severely Deformed Titanium

Seyed Vahid Sajadifar, Guney Guven Yapici

Publisher page

Abstract

In the present investigation, high-temperature compression tests were conducted at strain rates of 0.001 to 0.1 s−1 and at temperatures of 873 K to 1173 K (600 °C to 900 °C) in order to study the hot deformation characteristics and dynamic softening mechanisms of two different grades of commercial purity titanium after severe plastic deformation. It was observed that the effects of deformation rate and temperature are significant on obtained flow stress curves of both grades. Higher compressive strength exhibited by grade 2 titanium at relatively lower deformation temperatures was attributed to the grain boundary characteristics in relation with its lower processing temperature. However, severely deformed grade 4 titanium demonstrated higher compressive strength at relatively higher deformation temperatures (above 800 °C) due to suppressed grain growth via oxygen segregation limiting grain boundary motion. Constitutive equations were established to model the flow behavior, and the validity of the predictions was demonstrated with decent agreement accompanied by average error levels less than 5 pct for all the deformation conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. S. Faghihi, F. Azari, F.P. Zhilyaev, J.A. Szpunar, H. Vali and M. Tabrizian: Biomaterials, 2007, vol. 28, pp. 3887-3895.10.1016/j.biomaterials.2007.05.010 ↗
2. J.C. Fonseca, G.E.P. Henriques, L.C. Sobrinho and M.F.D. Goes: Dent Mater, 2003, vol. 19, pp. 686-691.10.1016/S0109-5641(03)00014-9 ↗
3. Y.J. Chen, Y.J. Li, J.C. Walmsley, S. Dumoulin and H.J. Roven: Metall Mater Trans A, 2010, vol. 41, pp. 787-794.10.1007/s11661-009-0040-x ↗
4. V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe and R.Z. Valiev: Mater Sci Eng A, 2001, vol. 299, pp. 59-67.10.1016/S0921-5093(00)01411-8 ↗
5. Z. Fan, H. Jiang, X. Sun, J. Song, X. Zhang and C. Xie: Mater Sci Eng A, 2009, vol. 527, pp. 45-51.10.1016/j.msea.2009.07.030 ↗
6. G. Purcek, I. Karaman, G.G. Yapici, M. Al-Maharbi, T. Kucukomeroglu and O. Saray: Int J Mater Res, 2007, vol. 98, pp. 332-338.10.3139/146.101470 ↗
7. G.G. Yapici, I. Karaman and H.J. Maier: Mater Sci Eng A, 2006, vol. 434, pp. 294-302.10.1016/j.msea.2006.06.082 ↗
8. S. Zhang, Y.C. Wang, A.P. Zhilyaev, D.V. Gunderov, S. Li, G.I. Raab, E. Korznikova and T.G. Langdon: Mater Sci Eng A, 2015, vol. 634, pp. 64-70.10.1016/j.msea.2015.03.032 ↗
9. S. Suwas, B. Beausir, L.S. Toth, J.J. Fundenberger and G. Gottstein: Acta Mater. 2011, vol. 59, pp. 1121–33.10.1016/j.actamat.2010.10.045 ↗
10. G. Purcek, G.G. Yapici, I. Karaman and H.J. Maier: Mater Sci Eng A, 2011, vol. 528, pp. 2303-2308.10.1016/j.msea.2010.11.021 ↗
11. V.L. Sordi, M. Ferrante, M. Kawasaki and T.G. Langdon: J Mater Sci, 2012, vol. 47, pp. 7870-7876.10.1007/s10853-012-6593-x ↗
12. P. Rodriguez-Calvillo and J.M. Cabrera: Mater Sci Eng A, 2015, vol. 625, pp. 311-320.10.1016/j.msea.2014.11.082 ↗
13. Y.C. Lin, M.S. Chen and J. Zhong: Mater Lett, 2008, vol. 62, pp. 2132–2135.10.1016/j.matlet.2007.11.032 ↗
14. H.J. McQueen: Mater Sci Eng A, 2004, vol. 387-389, pp. 203-208.10.1016/j.msea.2004.01.064 ↗
15. Z. Zeng, Y. Zhang and S. Jonsson: Mater Des, 2009, vol. 30, pp. 3105-3111.10.1016/j.matdes.2008.12.002 ↗
16. X. Chun and Z. Wen-feng: Trans Nonferr Metal Soc, 2010, vol. 20, pp. 2162-2167.10.1016/S1003-6326(09)60436-2 ↗
17. M.J. Tan and X.J. Zhu: J Achiev Mater Manuf Eng, 2006, vol. 18, pp. 183-186.
18. M.J. Tan and X.J. Zhu: Arch Mater Sci Eng, 2007, vol. 28, pp. 5-11.
19. J. Zhang, H. Di, H. Wang, K. Mao, T. Ma and Y. Cao: J Mater Sci, 2012, vol. 47, pp. 4000-4011.10.1007/s10853-012-6253-1 ↗
20. S.V. Sajadifar and G.G. Yapici: J Mater Eng Perform, 2014, vol. 23, pp. 1834-1844.10.1007/s11665-014-0947-2 ↗
21. Z. Zeng, S. Jonsson and Y. Zhang: Mater Sci Eng A, 2009, vol. 505, pp. 116-119.10.1016/j.msea.2008.11.017 ↗
22. L.C. Tsao, H.Y. Wu, J.C. Leong and C.J. Fang: Mater Des, 2012, vol. 34, pp. 179-184.10.1016/j.matdes.2011.07.060 ↗
23. S.V. Sajadifar and G.G. Yapici: Mater Des, 2014, vol. 53, pp. 749-757.10.1016/j.matdes.2013.07.057 ↗
24. V.M. Segal: Mater Sci Eng A, 1995, vol. 197, pp. 157-164.10.1016/0921-5093(95)09705-8 ↗
25. R.E. Barber, T. Dudo, P.B. Yasskin and K.T. Hartwig: Scr Mater, 2004, vol. 51, pp. 373-377.10.1016/j.scriptamat.2004.05.022 ↗
26. V.M. Segal: Mater Sci Eng A, 2004, vol. 386, pp. 269-276.10.1016/S0921-5093(04)00934-7 ↗
27. L.X. Li, D.S. Peng, J.A. Liu and Z.Q. Liu: J Mater Process Technol, 2001, vol. 112, pp. 1-5.10.1016/S0924-0136(00)00845-1 ↗
28. M.J. Tan, X.J. Zhu, S. Thiruvarudchelvan and K.M. Liew: Arch Mater Sci Eng, 2007, vol. 28, pp. 717-721.
29. E. Martin and J.J. Jonas: Acta Mater, 2010, vol. 58, pp. 4253-4266.10.1016/j.actamat.2010.04.017 ↗
30. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen and A.D. Rollett: Mater Today, 1998, vol. 1, pp. 14-15.10.1016/S1369-7021(98)80046-1 ↗
31. A.A. Khamei, K. Dehghani, R. Mahmudi: JOM, 2015, vol. 67, pp. 966-972.10.1007/s11837-015-1354-3 ↗
32. C.M. Sellars and C.H.J. Davis: Hot working and forming processes, Metals Society, London, 1979.
33. C.M. Sellars: Czech J Phys, 1985, vol. 35, pp. 239-248.10.1007/BF01605090 ↗
34. Y.C. Lin, M.S. Chen and J. Zhong: Mech Res Commun, 2008, vol. 35, pp. 142-150.10.1016/j.mechrescom.2007.10.002 ↗
35. A. Laasraoui and J.J. Jonas: Metall. Trans. A, 1991, vol. 22, pp. 1545-1558.10.1007/BF02667368 ↗
36. M. Hoseini, M.H. Pourian, F. Bridier, H. Vali and J.A. Szpunar: Mater Sci Eng A, 2012, vol. 532, pp. 58-63.10.1016/j.msea.2011.10.062 ↗
37. J. Gubicza, N.H. Nam, L. Balogh, R.J. Hellmig, V.V. Stolyarov, Y. Estrin and T. Ungár: J Alloys Compd, 2004, vol. 378, pp. 248–252.10.1016/j.jallcom.2003.11.162 ↗
38. sR.Z. Valiev and T.G. Langdon: Prog Mater Sci, 2006, vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
39. A.V. Podolskiy, H.P. Ng, I.A. Psaruk, E.D. Tabachnikova and R. Lapovok: J Mater Sci, 2014, vol. 49, pp. 6803-6812.10.1007/s10853-014-8382-1 ↗
40. O. Sitdikov, E. Avtokratova, T. Sakai, K. Tsuzaki, R. Kaibyshev and Y. Watanabe: Mater Sci Forum, 2008, vol. 584-4586, pp. 481-486.10.4028/www.scientific.net/MSF.584-586.481 ↗
41. E.J. Kwak, C.H. Bok, M.H. Seo, T.S. Kim and H.S. Kim: Mater Trans, 2008, vol. 49, pp. 1006-1010.10.2320/matertrans.MC200725 ↗
42. F.J. Gil, C. Aparicio and J.A. Planell: J Mater Synth Process, 2002, vol. 10, pp. 263-266.10.1023/A:1023094126132 ↗
43. N. Dudova, A. Belyakov, T. Sakai and R. Kaibyshev: Acta Mater, 2010, vol. 58, pp. 3624-3632.10.1016/j.actamat.2010.02.032 ↗
44. M. Winning: Scr Mater, 2008, vol. 58, pp. 85-88.10.1016/j.scriptamat.2007.09.034 ↗
45. A.A. Khamei and K. Dehghani: Metall Mater Trans A, 2010, vol. 41, pp. 2595-2605.10.1007/s11661-010-0338-8 ↗
46. X.J. Zhu, M.J. Tan and W. Zhou: Scr Mater, 2005, vol. 52, pp. 651-655.10.1016/j.scriptamat.2004.11.017 ↗
47. X.M. Chen, Y.C. Lin, M.S. Chen, H.B. Li, D.X. Wen, J.L. Zhang and M. He: Mater Des, 2015, vol. 77, pp. 41-49.10.1016/j.matdes.2015.04.004 ↗
48. Y.C. Lin, X.Y. Wu, b, X.M. Chen, J. Chen, D.X. Wen, J.L. Zhang and L.T. Li: J Alloys Compd, 2015, vol. 640, pp. 101-113.10.1016/j.jallcom.2015.04.008 ↗
49. M. Shaban and B. Eghbali: J Mater Sci Technol, 2011, vol. 27, pp. 359-363.10.1016/S1005-0302(11)60074-1 ↗
50. H.J. McQueen: Metall Mater Trans A, 2002, vol. 33, pp. 345-362.10.1007/s11661-002-0096-3 ↗
51. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena. Elsevier Science, New York, 2004.
52. M. Winning and D. Raabe: in Ceramic Transactions, 15th International Conference on Textures of Materials, Pittsburgh, 2008.
53. F. Moneteillet and J.J. Jonas: Metall Mater Trans A, 1996, vol. 27, pp. 3346-3348.10.1007/BF02663887 ↗
54. E.I, Poliak and J.J. Jonas: Acta Mater, 1996, vol. 44, pp. 127-136.10.1016/1359-6454(95)00146-7 ↗
55. B. Paul, A. Sarkar, J.K. Chakravartty, A. Verma, R. Kapoor and A.C. Bidaye: Metall Mater Trans A, 2010, vol. 41, pp. 74-1482.