Analysis of Deformation in Inconel 718 When the Stress Anomaly and Dynamic Strain Aging Coexist
Source abstract
Abstract
Deformation in Inconel 718 in the presence of combined effects of the stress anomaly and dynamic strain aging is analyzed according to an internal state variable model formulation. The analysis relies on the availability of experimental data in regimes of behavior where both the stress anomaly and dynamic strain aging are absent. A model that introduces two internal state variables—one characterizing interactions of dislocations with solute atoms and one characterizing interaction of dislocations with precipitates—is shown to adequately describe the temperature and strain-rate dependence of the yield stress in several superalloy systems. Strain hardening is then added with a third internal state variable to enable description of the full stress–strain curve. These equations are extrapolated into regimes where the stress anomaly and dynamic strain aging are present to identify signatures of their effects and to compare to similar analyses in a variety of metal systems. Dynamic strain aging in Inconel 718 follows similar trends to those observed previously. The magnitude of the stress anomaly tracks measurements of stress vs test temperature in pure Ni3Al. Several trends in the strain-rate sensitivity of elevated temperature deformation in superalloys are identified based on limited availability of measurements over a wide range of strain rates or tests using strain-rate changes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High-Velocity Impact and Material Behavior · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. The Minerals, Metals, and Materials Society: http://www.materialmoments.org/index.html, 2007.
2. Special Metals Corporation: Inconel Alloy 718, Publication No. SMC-045. http://www.specialmetals.com/documents/Inconel%20alloy%20718.pdf, 2007.
3. Nickel Development Institute: High-Temperature High-Strength Nickel Base Alloys, Supplement No. 393. http://www.stainless-steel-world.net/pdf/393.pdf 1995.
4. S. Miura, S. Ochiai, Y. Oya, Y. Mishima, and T. Suzuki, in MRS Symposium Proceedings, vol. 133, C.T. Lie, A. Taub, N.S. Stoloff, and C.C. Koch, eds., Materials Research Society, Pittsburgh, 1989, p. 241.10.1557/PROC-133-341 ↗
5. P. Veyssière and G. Saada: in Dislocations in Solids, vol. 10, F.R.N. Nabarro and M.S. Duesbery, eds., North-Holland, Amsterdam, 1996, p. 254.
6. P. B. Hirsch, J. Phy. III, 1991, vol. 1, pp. 989-996.
7. R. A. Mulford and U. F. Kocks, Acta Metal., 1979, vol. 27, pp. 1125 – 1134.10.1016/0001-6160(79)90130-5 ↗
8. H. Hänninen, M. Ivanchenko, Y. Yagodzinskyy, V. Nevdacha, U. Ehrnstén, and P. Aaltonen: in Proceedings of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power System—Water Reactors, 2005, T.R. Allen, P.J. King, and L. Nelson, eds., The Minerals, Metals, and Materials Society, 2005, pp. 1423–30.
9. R.A. Mulford, U.F. Kocks: Scripta Metal., 1979, vol. 13, pp. 729-732.10.1016/0036-9748(79)90145-5 ↗
10. P. S. Follansbee, Fundamentals of strength – principles, experiment, and applications of an internal state variable constitutive formulation, John Wiley & Sons, Hoboken, NJ, 2014.10.1002/9781118808412 ↗
11. P.S. Follansbee: ASME J. Eng. Mater. Technol., 2012, vol. 134, pp. 410071–4100710.10.1115/1.4006822 ↗
12. P. S. Follansbee, Materials Sciences and Applications, 2015, vol. 6, pp. 457-463.
13. Special Metals: Inconel Alloy 625. http://www.specialmetals.com/documents/Inconel%20alloy%20625.pdf.
14. Special Metals: Inconel Alloy 22, Publication No. SMC-049, http://www.specialmetals.com/documents/Inconel%20alloy%2022.pdf
15. E.W. Huang: PhD Dissertation, University of Tennessee, Knoxville, TN, December. http://trace.tennessee.edu/utk_graddiss/608.
16. Hastelloy C-22 Alloy, Haynes Corrosion-Resistant Alloys, H-2019F. http://www.haynesintl.com/pdf/h2019.pdf
17. P. Chaudhury and D. Zhao: Atlas of Formability, Hastelloy C-22, National Center for Excellence in Metalworking Technology (NCEMT), September, 1992.10.21236/ADA268324 ↗
18. R.A. Lane and C. Fink: Report AMMT-35, Advanced Materials, Manufacturing and Testing Information Analysis Center (AMMTIAC), 2009.
19. D. Joshi: MS Dissertation, Oklahoma State University, 2004.
20. ASM International: Atlas of Stress-Strain Curves, 2nd ed., ASM International, Metals Park, 2002, p. 654.
21. ASM International: Atlas of Stress-Strain Curves, 2nd ed., ASM International, Metals Park, 2002, p. 656
22. S.A. Nalawade, M. Sundararaman, R. Kishore, J.G. Shah, Scripta Mater., 2008, vol. 59, 2008, pp. 991-994.10.1016/j.scriptamat.2008.07.004 ↗
23. C. T. Sims and W. C. Hagel, The Superalloys, John Wiley & Sons, New York, 1972, p. 123.
24. R. C. Reed, The Superalloys – Fundamentals and Applications, Cambridge University Press, Cambridge, UK, 2006, p. 238.10.1017/CBO9780511541285 ↗
25. W.-S. Lee, C.-F. Lin, T.-H. Chen, and H.-W. Chen, Mater. Trans. Jpn Inst. Met., 2011, vol. 52(9), pp. 1734-1740.
26. S. Dike: MS Dissertation, Case Western Reserve University, May, 2010.
27. U. F. Kocks, R. E. Cook, and R. A. Mulford, Acta Metal., 1985, vol. 33, pp. 623-638.10.1016/0001-6160(85)90026-4 ↗
28. D. Golberg, M. Demura, and T. Hirano, Acta Mater., 1988, vol. 46, pp. 2695.10.1016/S1359-6454(97)00476-X ↗
29. M. Demura, D. Golberg, T. and Hirano, Intermetallics, 2007, vol. 15, pp. 1322-1331.10.1016/j.intermet.2007.04.007 ↗
30. P. H. Thornton, R. G. Davies, and T.L. Johnston, Metal. Trans., 1970, vol. 1, pp. 207 - 218.10.4271/700020 ↗
31. W. L. Mankins, J. C. Hosier, and T. H. Bassford, Metal. Trans., 1974, vol. 5, pp. 2579-2590.10.1007/BF02643879 ↗
32. T. M. Pollock and A. S. Argon, Acta Metal., 1992, vol. 40, pp. 1 – 30.10.1016/0956-7151(92)90195-K ↗
33. P. S. Follansbee and U. F. Kocks, Acta Metal., 1988, vol. 36, no. 1, pp. 81 – 93.10.1016/0001-6160(88)90030-2 ↗
34. A. Vattré, B. Devincre, and A. Roos, Intermetallics, 2009, vol. 17, pp. 988-994.10.1016/j.intermet.2009.04.007 ↗