Influence of DIT Parameters on the Cementite Spheroidization in a Low-Alloy Medium Carbon Steel
Source abstract
Abstract
The influence of strain, strain rate, and temperature on deformation-induced transformation (DIT) in a low-alloy medium carbon steel is studied. The strain promotes the nucleation of ferrite (deformation-induced ferrite) and also pearlite (deformation-induced pearlite), this last being characterized by a fine interlamellar spacing and morphological instability. At strains e > 0.5, intragranular nucleation activates and further ferrite nucleation over the newly created α/γ interface takes place, which gives rise to the precipitation of cementite (deformation-induced cementite) at the ferrite boundaries. Soft annealing treatments have been performed on the microstructures obtained by DIT, and the degree of spheroidization has been quantified by image analysis techniques. In comparison to non-deformed conditions, the application of DIT results in a higher degree of spheroidization after soft annealing. Moreover, the EBSD analysis denotes that ferrite grain size refinement is achieved with respect to non-deformed conditions. The degree of spheroidization is highly influenced by the applied strain level and subsequent holding temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. J.M. O´Brien and W. F. Hosford: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1255–6110.1007/s11661-002-0226-y ↗
2. H.L. Yi, Z.Y. Hou, Y.B. Xu, D. Wu and G.D. Wang: Scripta Mater., 2012, vol. 67, pp. 645-48.10.1016/j.scriptamat.2012.07.020 ↗
3. L. Storojeva, R. Kaspar and D. Ponge: ISIJ Int., 2004, vol. 44, pp. 1211-16.10.2355/isijinternational.44.1211 ↗
4. N. Tsuji and T. Maki: Scripta Mater., 2009, vol. 60, pp. 1044-49.10.1016/j.scriptamat.2009.02.028 ↗
5. J. Arruabarrena, P. Uranga, B. López, and J.M. Rodriguez-Ibabe: MS&T ‘11 Conference Proceedings, 2011, pp. 698–705.
6. H. Dong, X. Sun, W. Hui, S. Zhang, J. Shi and M. Wang: ISIJ Int., 2008, vol. 48, pp. 1126-32.10.2355/isijinternational.48.1126 ↗
7. S.L. Zhang, X.J. Sun and H. Dong: Mater. Sci. Eng. A, 2006, vol. 432, pp. 324-32.10.1016/j.msea.2006.06.057 ↗
8. H. Dong and X. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269-76.10.1016/j.cossms.2006.02.014 ↗
9. Z.G. Li, Z.G. Yang, C. Zhang and Z.Q. Liu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4406-11.10.1016/j.msea.2010.03.092 ↗
10. P.D. Hodgson, M.R. Hickson and R.K. Gibbs: Scripta Mater., 1999, vol. 40, pp. 1179-84.10.1016/S1359-6462(98)00411-4 ↗
11. C. Ghosh, V.V. Basabe, J.J. Jonas, Y. Kim, I. Jung and S. Yue: Acta Mater., 2013, vol. 61, pp. 2348-62.10.1016/j.actamat.2013.01.006 ↗
12. N. Isasti, D. Jorge-Badiola, M.L. Taheri, B. Lopez and P. Uranga: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3729-42.10.1007/s11661-011-0624-0 ↗
13. L. Sun, K. Muszka, B.P. Winne and E.J. Palmiere: Acta Mater., 2014, vol. 66, pp. 132-49.10.1016/j.actamat.2013.11.062 ↗
14. H. Dong, X.J. Sun, Q.Y. Liu and Y.Q. Weng, et al.: Iron Steel, 2003, vol. 38(10), pp. 56-67.
15. H. Beladi, G. L. Kelly, A. Shokouhi and P.D. Hodgson: Mater. Sci. Eng. A, 2004, vol. 367, pp. 152-61.10.1016/j.msea.2003.09.095 ↗
16. Ch. Zheng, N. Xiao, L. Hao, D. Li and Y. Li: Acta Mater., 2009, vol. 57, pp. 2956–68.10.1016/j.actamat.2009.03.005 ↗
17. H. Yada, C.M. Li and H. Yamagata: ISIJ Int., 2000, vol. 40, pp. 200-610.2355/isijinternational.40.200 ↗
18. P.J. Hurley, P.D. Hodgson: Mater. Sci. Technol., 2001, vol. 17, pp. 1360-710.1179/026708301101509566 ↗
19. S.A. Hackney and G.J. Shiflet: Acta Metall., 1987, vol. 35, pp. 1019-28.10.1016/0001-6160(87)90049-6 ↗
20. W.J. Nam and C.M. Bae: Scripta Mater., 1999, vol. 41, pp. 313-18.10.1016/S1359-6462(99)00168-2 ↗
21. J. Arruabarrena, B. López and J.M. Rodriguez-Ibabe: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1470-84.10.1007/s11661-013-2066-3 ↗
22. Y.L. Tian and R. W. Kraft: Metall. Trans. A, 1987, vol. 8A, pp. 1403-14.10.1007/BF02646654 ↗