journal article·2012-11Open access

Gas–Solid Interactions During Nonisothermal Heat Treatment of a High-Strength CrMnCN Austenitic Steel Powder: Influence of Atmospheric Conditions and Heating Rate on the Densification Behavior

Nikolaj Krasokha, Sebastian Weber, Stephan Huth, Kathrin Zumsande, Werner Theisen

Abstract

This work deals with gas–solid interactions between a high-alloyed steel powder and the surrounding atmosphere during continuous heating. It is motivated by the recently developed corrosion-resistant CrMnCN austenitic cast steels. Here, powder metallurgical processing would be desirable to manufacture highly homogeneous parts and/or novel corrosion-resistant metal-matrix composites. However, the successful use of this new production route calls for a comprehensive investigation of interactions between the sintering atmosphere and the metallic powder to prevent undesirable changes to the chemical composition, e.g., degassing of nitrogen or evaporation of manganese. In this study, dilatometric measurements combined with residual gas analysis, high-temperature X-ray diffraction (XRD) measurements, and thermodynamic equilibrium calculations provided detailed information about the influence of different atmospheric conditions on the microstructure, constitution, and densification behavior of a gas-atomized CrMnCN steel powder during continuous heating. Intensive desorption of nitrogen led to the conclusion that a vacuum atmosphere is not suitable for powder metallurgical (PM) processing. Exposure to an N2-containing atmosphere resulted in the formation of nitrides and lattice expansion. Experimental findings have shown that the N content can be controlled by the nitrogen partial pressure. Furthermore, the reduction of surface oxides because of a carbothermal reaction at elevated temperatures and the resulting enhancement of the powder’s densification behavior are discussed in this work.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. B.D. Shanina, V.G. Gavriljuk, H. Berns, and F. Schmalt: Steel Res., 2002, vol. 73 (3), pp. 105–13.10.1002/srin.200200181 ↗
2. V.G. Gavriljuk, A.I. Tyshchenko, O.N. Razumov, Y.N. Petrov, B.D. Shanina, and H. Berns: Mater. Sci. Eng. A, 2006, vol. 420, pp. 47–54.10.1016/j.msea.2006.01.066 ↗
3. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 707–12.10.1016/j.msea.2006.11.186 ↗
4. H. Berns, V.G. Gavriljuk, S. Riedner, and A.I. Tyshchenko: Steel Res., 2007, vol. 78 (9), pp. 714–19.10.1002/srin.200706274 ↗
5. S. Riedner: Ph.D. Dissertation, Ruhr-Universität Bochum, Bochum, Germany, 2010.
6. R.A. Hadfield: Metallurgy and its Influence on Modern Progress, Chapman and Hall, London, U.K., 1925, pp. 91–101.
7. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Acta Mater., 2000, vol. 48, pp. 3879–93.10.1016/S1359-6454(00)00192-0 ↗
8. B.D. Shanina, V.G. Gavriljuk, and H. Berns: Steel Res., 2007, vol. 78 (9), pp. 724–28.10.1002/srin.200706276 ↗
9. V.G. Gavriljuk and H. Berns: High Nitrogen Steels, Springer-Verlag, Berlin, Germany, 1999, pp. 100–02, 113–15, 130–34, 203–05, 263–71.
10. H. Berns, V.G. Gavriljuk, N. Nabiran, Y.N. Petrov, S. Riedner, and L.N. Trophimova: Steel Res., 2010, vol. 81 (4), pp. 299–307.10.1002/srin.200900142 ↗
11. H. Berns, B. Hussong, S. Riedner, and F. Wischnowski: Steel Res., 2010, vol. 3, no. 81, pp. 245–51.10.1002/srin.200900137 ↗
12. S. Riedner and H. Berns: J. Heat Treat. Mater., 2008, vol. 63, no. 2, pp. 84–94.10.3139/105.100448 ↗
13. H. Berns and S. Riedner: J. Heat Treat. Mater., 2008, vol. 63, no. 6, pp. 337–41.10.3139/105.100477 ↗
14. S.S. Panda, V. Singh, A. Upadhyaya, and D. Agrawal: Scripta Mater., 2006, vol. 54, pp. 2179–83.10.1016/j.scriptamat.2006.02.034 ↗
15. C. Padmavathi, A. Upadhyaya, and D. Agrawal: Scripta Mater., 2007, vol. 57, pp. 651–54.10.1016/j.scriptamat.2007.06.007 ↗
16. P. Samal, J. Pannell, U. Engström, and O. Mars: World PM2010 Proceedings, Fortezza da Basso Centre, Florence, Italy, 2010, vol. 3, pp. 201–08.
17. J.D. Fast: Interaction of Metals and Gases, vol. 1, Thermodynamics and Phase Relations, Academic Press, New York, NY, 1965, pp. 122–23, 148–52.
18. H. Berns: Industrial Heating, 2003, vol. 70, no. 5, pp. 47–50.
19. H. Berns, B. Edenhofer, and R. Zaugg: Trans. Mater. Heat Treat., 2004, vol. 25, no. 5, pp. 354–59.
20. H. Borgström and L. Nyborg: Powder Metall., 2006, vol. 49, no. 1, pp. 48–56.10.1179/174329006X98353 ↗
21. D. Chasoglou, E. Hryha, and L. Nyborg: World PM2010 Proceedings, Fortezza da Basso Centre, Florence, Italy, 2010, vol. 2, pp. 3–12.
22. E. Hryha and L. Nyborg: World PM2010 Proceedings, Fortezza da Basso Centre, Florence, Italy, 2010, vol. 2, pp. 267–74.
23. R.M. German: Int. J. Powder Metall., 1990, vol. 26, pp. 23–34.
24. R.M. German: Int. J. Powder Metall., 1990, vol. 26, pp. 35–43.
25. R.M. German: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1553–67.10.1007/s11661-997-0217-0 ↗
26. P.J. Uggowitzer and M. Harzenmoser: HNS 88, J. Foct and A. Hendry, eds., The Institute of Metals, London, U.K., 1989, pp. 174–79.
27. F. Vanderschaeve, R. Taillard, and J. Foct: J. Mater. Sci., 1995, vol. 30, pp. 6035–46.10.1007/BF01151525 ↗
28. N. Krasokha, S. Huth, K. Zumsande, S. Weber and W. Theisen: World PM2010 Proceedings, Fortezza da Basso Centre, Florence, Italy, 2010, vol. 2, pp. 259–66.
29. C. Friedrich, G. Berg, E. Broszeit, and C. Berger: Materialwiss. Werkst., 1997, vol. 28, pp. 59–76.10.1002/mawe.19970280206 ↗
30. A. Sieverts: Z. Phys. Chem. A, 1931, vol. 155, pp. 299–313.10.1515/zpch-1931-15529 ↗
31. H. Berns: Proc. Int. Current Status Seminar on Thermochemical Surface Engineering of Stainless Steel, 2000, Osaka, Japan, pp. 111–16.10.1201/9780367814151-13 ↗
32. F. Schmalt and H. Berns: Proc. 1st Int. Surface Engineering Congress and the 13th IFHTSE Congress, 2002, Columbus, OH, pp. 88–97.
33. H. Mitsui and S. Kurihana: ISIJ Int., 2007, vol. 47, no. 3, pp. 479–85.10.2355/isijinternational.47.479 ↗
34. H. Berns: Materialwiss. Werkst., 2002, vol. 33, pp. 5–11.10.1002/1521-4052(200201)33:1<5::AID-MAWE5>3.0.CO;2-V ↗
35. J.D. Fast: Interactions of Metals and Gases Vol. II, Kinetics and Mechanisms, Macmillan Press, London, U.K., 1971, pp. 236–42.
36. H.J. Grabke and G. Hörz: Ann. Rev. Mater. Sci., 1977, vol. 7, pp. 155–78.10.1146/annurev.ms.07.080177.001103 ↗