journal article·2012-01

Protection by Thermal and Chemical Activation with Cerium Salts of the Alloy AA2017 in Aqueous Solutions of NaCl

Manuel Bethencourt, Francisco Javier Botana, María José Cano, Leandro González-Rovira, Mariano Marcos, José María Sánchez-Amaya

Publisher page

Abstract

A wide variety of anticorrosive treatments for aluminum alloys that can be employed as “green” alternatives to those based on Cr(VI) are currently under development. This article reports a study of the morphological and anticorrosive characteristics of surface layers formed on the Al–Cu alloy AA2017 by immersion treatment in baths of cerium salt, accelerated by increased temperature and the employment of hydrogen peroxide. Scanning electron microscopy (SEM)/X-ray energy dispersive spectroscopy (XEDS) studies of the samples treated have demonstrated the existence of a heterogeneous layer formed by a film of aluminum oxide/hydroxide on the matrix, and a series of dispersed islands of cerium over the cathodic intermetallics. The protective efficacy has been evaluated using electrochemical techniques, linear polarizations (LP) and electrochemical impedance spectroscopy (EIS), and salt spray tests. The results obtained indicate that the layer provided good resistance to corrosion in media with chlorides, and the method gives a considerable reduction of the time required for the immersion treatments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bauxite Residue and Utilization · Pigment Synthesis and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. M. Bethencourt, F.J. Botana, M.J. Cano, M. Marcos, J.M. Sánchez-Amaya, and L. González-Rovira: Corrosion Sci., 2009, vol. 51, no. 3, pp. 518-24.10.1016/j.corsci.2008.12.027 ↗
2. R.G. Buchheit, R.P. Grant, P.F. Halva, B. Mckenzie, and G.L. Zender: J. Electrochem. Soc., 1997, vol. 144, no. 8, pp. 2621-28.10.1149/1.1837874 ↗
3. N. Dimitrov, J.A. Mann, M. Vukmirovic, and K. Sieradzki: J. Electrochem. Soc., 2000, vol. 147, no. 9, pp. 3283-85.10.1149/1.1393896 ↗
4. K. Aramaki: Corrosion Sci., 2001, vol. 43, no. 11, pp. 2201-15.10.1016/S0010-938X(00)00189-X ↗
5. S. Lin, H. Shih, and F. Mansfeld: Corrosion Sci., 1992, vol. 33, no. 9, pp. 1331-49.10.1016/0010-938X(92)90176-4 ↗
6. W.N. Garrard: Corrosion Sci., 1994, vol. 50, no. 3, pp. 215-25.10.5006/1.3293513 ↗
7. A.J. Aldykewicz, H.S. Isaacs, and A.J. Davenport: J. Electrochem. Soc., 1995, vol. 142, no. 10, pp. 3342-50.10.1149/1.2049985 ↗
8. B.R.W. Hinton, D.R. Arnott, and N.E. Ryan: Mater. Forum, 1986, vol. 9, no. 3, pp. 162-73.
9. B.R.W. Hinton, N.E. Ryan, and D.R. Arnott: Mater. Australiasia, 1987, vol. 19, pp. 18-20.
10. J. Stoffer, T.J. O’Keefe, X. Lin, E. Morris, P. Yu, and S. Hayes: Collection of Technical Papers – 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibit, AIAA, St. Louis, MO, 1999, pp. 903–17.
11. L. Wilson and B.R.W. Hinton: Patent WO 88/06639, 1988.
12. A.E. Hughes, R.J. Taylor, B.R.W. Hinton, and L. Wilson: Surf. Interface Anal., 1995, vol. 23, pp. 540-50.10.1002/sia.740230714 ↗
13. B.R.W. Hinton, A. Hughes, R. Taylor, M. Henderson, K. Nelson, and L. Wilson: Proceedings of the 13th International Corrosion Congress (ICC), vol. 3, Melbourne, Australia, 1996, pp. 337-1, 337-7.
14. A.E. Hughes, K.J. Nelson, R.J. Taylor, B.R.W. Hinton, M.J. Henderson, L. Wilson, and S.A. Nugent: International Patent Application No. PCT/AU94/00539, International Patent No. WO95/08008, 1995.
15. A.E. Hughes, J.D. Gorman, and P.J.K. Paterson: Corrosion Sci., 1996, vol. 38, no. 11, pp. 1957-76.10.1016/S0010-938X(96)00088-1 ↗
16. J.D. Gorman, S.T. Johnson, P.N. Johnston, P.J.K. Paterson, and A.E. Hughes: Corrosion Sci., 1996, vol. 38, no. 11, pp. 1977-90.10.1016/S0010-938X(96)00089-3 ↗
17. M. Dabalà, L. Armelao, A. Buchberger, and I. Calliari: Appl. Surf. Sci., 2001, vol. 172, pp. 312-22.10.1016/S0169-4332(00)00873-4 ↗
18. Y. Xingwen and C. Chunan: Trans. Nonferreous Met. Soc. China, 2000, vol. 10, no. 5, pp. 580-84.
19. Y. Xingwen, C. Chunan, Y. Zhiming, Z. Derui, and Y. Zhongda: Mater. Sci. Eng. A, 2000, vol. A28, pp. 456-63.
20. Y. Xingwen, C. Chunan, Y. Zhiming, Z. Derui, and Y. Zhongda: Corrosion. Sci., 2001, vol. 43, pp. 1283-94.10.1016/S0010-938X(00)00141-4 ↗
21. A. Decroly and J.P. Petitjeanse: Surf. Coat. Tech., 2005, vol. 194, no. 1, pp. 1-9.10.1016/j.surfcoat.2004.05.012 ↗
22. D. Ho, N. Brack, J. Scully, T. Markley, M. Forsyth, and B. Hinton: J. Electrochem. Soc., 2006, vol. 153, no. 9, pp. B392-01.10.1149/1.2217260 ↗
23. A.J. Aldykewicz, H.S. Isaacs, and A.J. Davenport: J. Electrochem. Soc., 1996, vol. 143, pp. 147-54.10.1149/1.1836400 ↗
24. P. Campestrini, H. Terryn, A. Hovestad, and J.H.W. de Wit: Surf. Coat. Tech., 2004, vol. 176, no. 3, pp. 365-81.10.1016/S0257-8972(03)00743-6 ↗
25. A. Aballe, M. Bethencourt, F.J. Botana, M.J. Cano, and M. Marcos: Mater. Corros., 2002, vol. 53, pp. 176-84.10.1002/1521-4176(200203)53:3<176::AID-MACO176>3.0.CO;2-K ↗
26. M. Bethencourt, F.J. Botana, M.J. Cano, and M. Marcos: Appl. Surf. Sci., 2002, vol. 189, pp. 162-73.10.1016/S0169-4332(02)00129-0 ↗
27. MIL-DTL-C-5541, Military Specification: Chemical Conversion Coatings on Aluminum and Aluminum Alloys, Revision F, 2006.
28. M. Stern: Corrosion Sci., 1958, vol.14, pp. 329-32.
29. M. Bethencourt, F.J. Botana, M.J. Cano, R.M. Osuna, and M. Marcos: Mater. Corros., 2003, vol. 54, pp. 77-83.10.1002/maco.200390024 ↗
30. M. Bethencourt, F.J. Botana, M.J. Cano, M. Marcos, J.M. Sánchez-Amaya, and L. González Rovira: Corrosion. Sci., 2008, vol. 50, no. 5, pp. 1376-84.10.1016/j.corsci.2007.12.009 ↗
31. A. Aballe, M. Bethencourt, F.J. Botana, M.J. Cano, and M. Marcos: Mater. Corros., 2002, vol. 53, pp. 176-84.10.1002/1521-4176(200203)53:3<176::AID-MACO176>3.0.CO;2-K ↗
32. M. Bethencourt, F.J. Botana, M.J. Cano, and M. Marcos: Appl. Surf. Sci., 2004, vol. 238, pp. 278-81.10.1016/j.apsusc.2004.05.268 ↗
33. M.F. Montemor, A.M. Simões, and M.G.S. Ferreira: Prog. Org. Coat., 2001, vol. 43, pp. 274-81.10.1016/S0300-9440(01)00209-0 ↗
34. D.R. Mullins, S.H. Overbury, and D.R. Huntley: Appl. Surf. Sci., 1998, vol. 409, pp. 307-19.10.1016/S0039-6028(98)00257-X ↗
35. S.A. Hayes, P. Yu, M.J. O′Keefe, and O. Stoffer: J. Electrochem. Soc., 2002, vol. 149, no. 12, pp. C623-630.10.1149/1.1516775 ↗
36. P. Yu, S.A. Hayes, T.J. O’Keefe, M.J. O’Keefe, and O. Stoffer: J. Electrochem. Soc., 2002, vol. 152, no. 1, pp. C74-79.
37. F.H. Scholes, C. Soste, A.E. Hughes, S.G. Hardin, and P.R. Curtis: Appl. Surf. Sci., 2006, vol. 253, pp. 1770–80.10.1016/j.apsusc.2006.03.010 ↗