journal article·2003-07

Microstructure and fatigue characteristics of direct chill cast and electromagnetic cast 2024 Al alloy ingots

Sug Won Kim, Hai Hao

Publisher page

Abstract

The distinct advantages of the electromagnetic casting (EMC) process consist in the presence of stirring motions in the melt, which lead to significant grain size reduction in solidified ingot. Furthermore, surface and subsurface qualities are improved due to the absence of ingot mold. However, it is impossible to achieve the aforementioned advantages in conventional direct chill casting (DCC). In order to contrast the before and after heat treatments of the microstructural and mechanical characteristics of EMC and DCC 2024 aluminium alloys, optical microscopy, scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffractions (XRD), differential scanning calorimetry (DSC), etc. were carried out. Compared with the DCC ingot, the EMC ingot has better mechanical properties not only in the ascast condition but also in the as-aged condition. The DSC curves show that the EMC specimens have high enthalpy, i.e., the thermal kinetic energy to form precipitates during the aging treatment process. Despite heat treatments applied to the DCC ingot, it fails to attain the same mechanical properties as the EMC ingot. Moreover, considering the expernsive scalping operation for DCC ingots, the EMC technique, which offers a lower manufacturing cost, is one of the best manufacturing methods used in obtaining the ingots of wrought aluminum alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Z.N. Getselev: J. Met., 1971, vol. 23, pp. 38–39.
2. D.C. Prasso, J.W. Evans, and I.J. Wilson: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 1243–51.10.1007/BF02654009 ↗
3. S.W. Kim, H. Hao, U.J. Lee, K.D. Woo, and J.Z. Jin: Mater. Trans., 2001, vol. 42, pp. 1952–58.10.2320/matertrans.42.1952 ↗
4. M. Furui, Y. Kojima, and M. Matsuo: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 400–04.10.2355/isijinternational.33.400 ↗
5. I.J. Polmear: Light Alloys—Metallurgy of the Light Metals, 3rd ed., Arnold, London, 1995, p. 94.
6. R. Ricou and C. Vives: Metall. Trans. B, 1985, vol. 16B, pp. 377–84.
7. J. Sakane, B.Q. Li, and J.W. Evans: Metall. Trans. B, 1988, vol. 19B, pp. 397–408.10.1007/BF02657737 ↗
8. J. Sheppard: Extrusion of Aluminum Alloys, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1999, p. 208.10.1007/978-1-4757-3001-2 ↗
9. X.J. Jiang, B. Noble, B. Holme, G. Waterloo, and J. Tafto: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 339–48.10.1007/s11661-000-0269-x ↗
10. R.A. Higgins: The Properties of Engineering Materials, Edward Arnold, London, 1994, p. 264.
11. S.Y. Yuan, J.W. Yeh, and C.H. Tsau: Mater. Trans., JIM, 1999, vol. 40, pp. 233–41.10.2320/matertrans1989.40.233 ↗
12. H.K. Cho: Ph.D. Dissertation, Tohuku University, Tohuku, Japan (1997).
13. A.K. Kamio: Microstructure and Properties of Aluminum, Japan Institute of Light Metals, 1991, pp. 201–09
14. W.F. Miao and D.E. Laughlin: J. Mater. Sci. Lett., 2000, vol. 19, pp. 201–03.10.1023/A:1006798305992 ↗
15. I.J. Polmear: Light Alloys—Metallurgy of the Light Metals, 3rd ed., Arnold, London, 1995, p. 58.
16. Y. Xu, P.J. Gregson, and I. Sinclair: Mater. Sci. Forum, 2000, vols. 331-337, pp. 1525–30.10.4028/www.scientific.net/MSF.331-337.1525 ↗
17. C.Y. Kung and M.E. Fine: Metall. Trans. A, 1979, vol. 10A, pp. 603–10.10.1007/BF02658324 ↗
18. A. Plumtree and A. Varvani-Farahani: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1377–82.10.4028/www.scientific.net/MSF.217-222.1377 ↗
19. N. Manabu and T. Eto: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1517–22.10.4028/www.scientific.net/MSF.217-222.1517 ↗
20. C.J. Vreeman, M.J.M. Krane, and F.P. Incropera: Int. J. Heat Mass Transfer, 2000, vol. 43, pp. 677–86.10.1016/S0017-9310(99)00174-X ↗
21. B. Zhang, D.R. Poirier, and W. Chen: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2659–55.10.1007/s11661-999-0306-3 ↗
22. H. Jiang, P. Brown, and J.F. Knott: J. Mater. Sci., 1999, vol. 34, pp. 719–25.10.1023/A:1004560510632 ↗