journal article·2014-07

High Temperature Deformation Behavior of As-Cast Al-3Mg-0.25Sc Alloy

M. Suresh Kumar, Ambresha, K. Venkateswarlu, V. R. Ranganath

Publisher page

Abstract

High temperature deformation behavior of as-cast Al-3Mg-0.25Sc alloy was characterized in a wide range of temperatures 573 K to 773 K (300 °C to 500 °C) and strain rates (0.001 to 10 s−1). A threshold stress behavior is observed in the temperature range of 573 K to 673 K (300 °C to 400 °C) due to interaction of dislocations with precipitates. In the temperature range of 573 K to 623 K (300 °C to 350 °C), the dislocations are pinned by precipitates, following Orowan-bowing mechanism. At 673 K (400 °C), the dislocations bypass the particles by climb process. At high temperature and low strain rate of 723 K (450 °C), and 0.001 s−1, respectively, the alloy exhibited high efficiency of power dissipation for optimal hot working process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. ASM Metals Handbook: Properties, and Selection: Non-ferrous Alloys and Special-Purpose Materials, 10th ed., ASM International, Materials Park, OH, 1990, vol. 2, pp. 490–91.
2. I.J. Polmear: Light alloys metallurgy of the light metals, 3rd ed., Arnold publishers, London,. 1995, pp.185-186.
3. L.S. Toropova, D.G. Eskin, M.L. Kharakterova, and T.V. Dobatkina: Advanced Aluminum Alloys Containing Scandium, Gordon and Breach Sci. Pub., The Netherlands, 1998, pp. 133-160.
4. V.G. Davydov, T.D. Rostova, V.V. Zakharov, Yu.A. Filatove, and V.I.Yelagin: Mater Sci Eng, 2000, vol. 30A, pp. 280-297.
5. M.D. Drits, L.S. Toropova, and Yu.G. Bykov: Metalloved.Term. Obbrab. Met., 1983, vol. 7, pp. 60-63.
6. N. Blake, and M.A. Hopkins: J. Mater. Sci., 1985, vol. 20, pp. 2861-2867.10.1007/BF00553049 ↗
7. T. V.I. Wirtz, G. Lütejering, A. Gysler, B. Lenczowski, and R. Rauh: Mater. Sci. Forum, 2000, vol. 1489, pp. 331–337.
8. L.I. Kaygorodova, and V.P. Domashnikov: Phys. Met. Metall., 1990, vol. 68, pp. 160–164.
9. Yu.M. Vainblat, S.S. Khayurov, and L.B.Ber: Tekhnol Legk Spl., 1996, vol. 3, pp. 18–22.
10. L.M. Dougherty, I.M. Robertson, and J.S. Vetrano: Acta Mater., 2003, vol. 51, pp. 4367–4378.10.1016/S1359-6454(03)00262-3 ↗
11. T. Aiura, N. Sugawara, and Y. Miura: Mater. Sci. Eng. A, 2000, vol.280, pp.139–145.10.1016/S0921-5093(99)00680-2 ↗
12. R. Roumina, and C.W. Sinclair: Acta Mater., 2010, vol. 58, pp. 111–121.10.1016/j.actamat.2009.08.062 ↗
13. Kentaro Ihara, and Yasuhiro Miura: Mater. Sci. Eng. A, 2004, vol. 387, pp. 647-650.10.1016/j.msea.2004.05.082 ↗
14. Y.W. Riddle, and T.H. Sanders: Metall. Mater. Trans. A, 2004, vol. 35, pp.341-350.10.1007/s11661-004-0135-3 ↗
15. V. Ocenasek, and M. Slamova: Mater. Char, 2001, vol. 47(2), pp.157-162.10.1016/S1044-5803(01)00165-6 ↗
16. H.G. Paris, T.H. Sanders Jr, and Y.W. Riddle: Proc. ICAA-6, 1998, pp. 449–504.
17. T.G. Nieh, R. Kaibyshev, L.M. Hsiung, N. Nguyen, and J. Wadsworth: Scripta Mater., 1997, vol. 36, pp. 1011–1016.10.1016/S1359-6462(96)00479-4 ↗
18. P.B. Berbon, S. Komura, A. Utsunomiya, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon: Mater. Trans. JIM, 1999, vol. 40, pp. 772–778.10.2320/matertrans1989.40.772 ↗
19. M. Furukawa, A. Utsunomiya, K. Matsubara, Z. Horita, and T.G. Langdon: Acta Mater., 2001,vol. 49, pp. 3829–3838.10.1016/S1359-6454(01)00262-2 ↗
20. T.G. Nieh, L.M. Hsiung, J. Wadsworth, and R. Kaibyshev: Acta Mater., 1998, vol. 46, pp. 2789–2800.10.1016/S1359-6454(97)00452-7 ↗
21. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon: Acta Mater., 2000, vol. 48, pp. 3633–3640.10.1016/S1359-6454(00)00182-8 ↗
22. S. Komura, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 2001, vol. 32, pp. 707–716.
23. N. Balasubramanian, and T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 410, pp. 476– 479.10.1016/j.msea.2005.08.090 ↗
24. O. Roder, T. Wirtz, V. Gysler, and G. Lütejering: Mater. Sci. Eng. A, 1997, vol. 181 pp. 234–236.
25. C. Watanabe, C.Y. Jin, R. Monzen, and K. Kitagawa: Inter J of Fatigue 2008, vol. 30, pp. 635–641.10.1016/j.ijfatigue.2007.05.010 ↗
26. M. Kamachi, M. Furukawa, Z. Horita and T.G. Langdon: Mater Trans, 2004, vol. 45, pp. 2521-2524.10.2320/matertrans.45.2521 ↗
27. F. Musin, R. Kaibyshev, Y. Motohashi, and G. Itoh: Scripta Mater., 2004, vol. 50, pp. 511–516.10.1016/j.scriptamat.2003.10.021 ↗
28. R.R. Sawtell, and C.L. Jensen: Metall. Trans. A, 1990, vol. 21, pp. 421-430.10.1007/BF02782422 ↗
29. T.G. Neih, L.M. Hsiung, J.Wadsworth, and R. Kaibyshev: Acta Metall., 1998, vol. 46, pp. 2789-2800.
30. Y.V.R.K. Prasad: Ind. J. of Technol., 1990, vol. 28, pp. 435-451.
31. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, L.A. Lark, and D.R. Barker: Metall. Trans. A, 1984,vol. 15, pp. 883-888.
32. H. Ziegler: Progress in Solid Mechanics, Vol. 4, John Wiley and Sons, New York, 1963, pp. 93-95.
33. S.V.S. Narayana Murty, and B. Nageswara Rao: Mater. Sci. Eng. A, 1998, vol.254, pp.76–82.10.1016/S0921-5093(98)00764-3 ↗
34. F.A. Mohamed, and T.G. Langdon: J.Eng.Mater.Technol, 1976, vol. 98(2), pp. 125-130.10.1115/1.3443352 ↗
35. F.A. Mohamed, and T.G. Langdon: Metall. Trans,1974, vol.5, 2339 -2345.10.1007/BF02644014 ↗
36. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol.3, pp. 1-7.10.1179/msc.1969.3.1.1 ↗
37. J. Weertman: J. Appl. Phys. 1957, vol. 28, pp. 1185-89.10.1063/1.1722604 ↗
38. R. L. Goetz, and S.L. Semiatin: J Mater. Eng Perform., 2001, vol. 10, pp. 710-717.10.1361/105994901770344593 ↗
39. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, 2nd ed., Elsevier Ltd., Amsterdam , 2004, pp. 434-441.
40. J.C. Gibeling, and W.D. Nix: Mater. Sci. Eng., 1980, 45, pp. 123-135.10.1016/0025-5416(80)90218-9 ↗
41. I.C. Hsiao and J.C. Huang: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1373–83.10.1007/s11661-002-0062-0 ↗
42. K.T.Park and F.A. Mohamed: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3119-29.10.1007/BF02669441 ↗
43. D.N. Seidman, E.A. Marquis and D.C. Dunand: Acta Mater, 2002, vol. 50, pp. 4021-4035.10.1016/S1359-6454(02)00201-X ↗