Prediction of Indentation Behavior of Superelastic TiNi
Source abstract
Abstract
Superelastic TiNi shape memory alloys have been extensively used in various applications. The great interest in TiNi alloys is due to its unique shape memory and superelastic effects, along with its superior wear and dent resistance. Assessment of mechanical properties and dent resistance of superelastic TiNi is commonly performed using indentation techniques. However, the coupling of deformation and reversible martensitic transformation of TiNi under indentation conditions makes the interpretation of results challenging. An attempt is made to enhance current interpretation of indentation data. A load-depth curve is predicted that takes into consideration the reversible martensitic transformation. The predicted curve is in good agreement with experimental results. It is found in this study that the elastic modulus is a function of indentation depth. At shallow depths, the elastic modulus is high due to austenite dominance, while at high depths, the elastic modulus drops as the depth increases due to austenite to martensite transition, i.e., martensite dominance. It is also found that TiNi exhibits superior dent resistance compared to AISI 304 steel. There is two orders of magnitude improvement in dent resistance of TiNi in comparison to AISI 304 steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Z. Farhat, G. Jarjoura, and M. Shahirnia: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3544-51.10.1007/s11661-013-1727-6 ↗
2. L. Qian, Q. P. Sun, and X. Xiao: Wear, 2006, vol. 260, pp. 509-22.10.1016/j.wear.2005.03.006 ↗
3. W. Yan, Q. P. Sun, X. Q. Feng, and L. Qian: Int. J. Solids Struct., 2007, vol. 44, pp. 1-17.10.1016/j.ijsolstr.2006.04.007 ↗
4. Y. J. He and Q. P. Sun: Int. J. Mech. Sci., 2010, vol. 52, pp. 198-211.10.1016/j.ijmecsci.2009.09.008 ↗
5. D. Tabor: Phil. Mag. A, 1996, vol. 74, pp. 1207-12.10.1080/01418619608239720 ↗
6. Y.T. Cheng and C.M. Cheng: Mater. Sci. Eng. R, 2004, vol. 44, pp. 91-149.10.1016/j.mser.2004.05.001 ↗
7. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564-83.10.1557/JMR.1992.1564 ↗
8. Z.H. Xu and J. Agren: Phil. Mag., 2004, vol. 84, pp. 2367-80.10.1080/14786430410001690015 ↗
9. Y.T. Cheng and C.M. Cheng: Mater. Sci. Eng. A, 2005, vol. 409, pp. 93-9.10.1016/j.msea.2005.05.118 ↗
10. D.M. Ebenstein and L.A. Pruitt: Nano Today, 2006, vol. 1, pp. 26-33.10.1016/S1748-0132(06)70077-9 ↗
11. W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411-25.10.1016/S0022-5096(97)00086-0 ↗
12. H. Hertz: Miscellaneous Papers, Macmillan and Co., London, 1896.
13. W.C. Oliver and G.M. Pharr: J. Mater. Res., 2004, vol. 19, pp. 3–20.10.1557/jmr.2004.19.1.3 ↗
14. L.M. Qian, X.D. Xiao, Q.P. Sun, and T.X. Yu: Appl. Phys. Lett., 2004, vol. 84, pp. 1076–78.10.1063/1.1646218 ↗
15. W. Ni, Y.T. Cheng, and D.S. Grummon: Appl. Phys. Lett., 2003, vol. 82, pp. 2811–13.10.1063/1.1569984 ↗
16. X.Q. Feng, L.M. Qian, W. Yan, and Q.P. Sun: Appl. Phys. Lett., 2008, vol. 92, pp. 121909.10.1063/1.2903106 ↗
17. G. Kang and W. Yan: Philos. Mag., 2010, vol. 90, pp. 599-616.10.1080/14786430903213346 ↗
18. Q. Kan, W. Yan, G. Kang, and Q. Sun : J. Mech. Phys. Solids, 2013, vol. 61, pp.2015-33.10.1016/j.jmps.2013.05.007 ↗
19. Y. Zhang, Y.T. Cheng, and D.S. Grummon: J. Appl. Phys., 2007, vol. 101, pp. 053507.10.1063/1.2436928 ↗
20. A. Amini, W. Yan, and Q. Sun: Appl. Phys. Lett., 2011, vol. 99, pp. 021901.10.1063/1.3603933 ↗
21. Z. Ma, S. Long, Y. Pan, and Y. Zhou: J. Appl. Phys., 2008, vol. 103, pp. 043512.10.1063/1.2885090 ↗
22. M. S. De-Guzman, G. Neubauer, P. Flinn, and W. D. Nix: Mater. Res. Soc. Symp. Proc., 1993, vol. 308, pp. 613.10.1557/PROC-308-613 ↗
23. Z. Xue, K.C. Hwang, M. Li, and Y. Huang: J. Eng. Mater. Technol., 2002, vol. 124, pp. 371-79.10.1115/1.1480409 ↗
24. N. A. Fleck and J. W. Hutchinson: Adv. Appl. Mech., 1997, vol. 33, pp. 295-361.10.1016/S0065-2156(08)70388-0 ↗
25. H. Gao, Y. Huang, W. D. Nix, and J. W. Hutchinson: J. Mech. Phys. Solids, 1999, vol. 47, pp. 1239-63.10.1016/S0022-5096(98)00103-3 ↗
26. Y. Huang, H. Gao, W. D. Nix, and J. W. Hutchinson: J. Mech. Phys. Solids, 2000, vol. 48, pp. 99-128.10.1016/S0022-5096(99)00022-8 ↗
27. A.C. Fischer-Cripps: Introduction to contact mechanics, 2nd ed., Springer, New York, NY, 2007.10.1007/978-0-387-68188-7 ↗
28. Z. Farhat and C. Zhang: Tribol Lett., 2010, vol. 37, pp. 169–73.10.1007/s11249-009-9507-6 ↗
29. W. Zaki and Z. Moumni: J. Mech. Phys. Solids, 2007, vol. 55, pp.2427-54.10.1016/j.jmps.2007.03.011 ↗
30. G. Kang, Q. Kan, L. Qian, and Y. Liu: Mech. Mater., 2009, vol. 41, pp. 139-53.10.1016/j.mechmat.2008.09.001 ↗