On the Influence of Alloy Composition on the Fracture Toughness of Two-Phase Ti-Al-Nb Alloys Undergoing Stress-Induced Martensitic Transformation
Source abstract
Abstract
The effect of alloy composition on the fracture toughness of Ti-Al-Nb alloys, which undergo stress-induced martensitic transformation (SIMT), was investigated for a given volume fraction of primary α 2. Both Ti-18Al-8Nb and Ti-15Al-12Nb alloys exhibited lower fracture toughness values as compared to Ti-15Al-8Nb alloy, which indicated that higher Al or Nb was detrimental to fracture toughness in these alloys in the presence of primary α 2. The results were explained on the basis of the effect of composition on fracture toughness contributions due to SIMT as well as ductile fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. M.J. Blackburn and M.P. Smith: AFML Report No. AFM-TR78-V18, AFML, Wright Patterson Airforce Base, Dayton, OH, 1978.
2. B.J. Marquardt and D.D. Krueger: Proc. 7th Int. Conf. on Titanium, San Diego, CA, 1992, F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1992, pp. 562–68.
3. R.W. Hayes: Scripta Mater., 1996, vol. 34, pp. 1005–12.10.1016/1359-6462(95)00611-7 ↗
4. C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle, and R. Wheeler: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamagnchi, eds., The Minerals, Metals and Materials Society, Warrendale, PA, 1997, pp. 795–804.
5. F. Tang, S. Nakazawa, and M. Hagiwara: Mater. Sci. Eng. A, 2002, vol. 325, pp. 194–201.10.1016/S0921-5093(01)01462-9 ↗
6. A.G. Paradkar, B. Narsing Rao, J. David, T.K. Nandy, A.K. Gogia, and D. Banerjee: Technical Report No. DMRL TR 2004359, DMRL, Hyderabad, India, 2004.
7. A.G. Paradkar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 551–58.10.1007/s11661-007-9432-y ↗
8. A.G. Paradkar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Mater. Sci. Eng., 2007, vol. A 456, pp. 292–99.10.1016/j.msea.2006.11.156 ↗
9. A.G. Paradkar, Vikas Kumar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Mater. Sci. Eng., 2008, vol. A486, pp. 273–82.10.1016/j.msea.2007.10.005 ↗
10. A.G. Paradkar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Mater. Sci. Eng., 2008, vol. A487, pp. 14–19.10.1016/j.msea.2007.10.021 ↗
11. D. Banerjee, A.K. Gogia, T.K. Nandy, K. Muraleedharan, and R.S. Mishra: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 19–33.
12. A.G. Paradkar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Mater. Sci. Eng., 2008, vol. A491, pp. 390–96.10.1016/j.msea.2008.02.012 ↗
13. ASTM Standard E399, ASTM Annual Book of Standards, ASTM, Philadelphia , PA, 2004.
14. A.G. Paradkar, S.V. Kamat, A.K. Gogia, and B.P. Kashyap: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2086–94.10.1007/s11661-008-9560-z ↗
15. S.D. Antolovich and B. Singh: Metall. Trans., 1971, vol. 2, pp. 2136–41.10.1007/BF02917542 ↗
16. N.L. Richards: J. Mater. Eng. Performance, 2004, vol. 13, pp. 223–25.10.1361/10599490418424 ↗
17. M.J. Blackburn and J.A. Feeney: J. Inst Met., 1971, vol. 99, pp. 132–36.
18. S.V. Kamat, A.K. Gogia, and D. Banerjee: Acta Mater., 1998, vol. 46, pp. 239–51.10.1016/S1359-6454(97)00207-3 ↗