journal article·2011-06

Mushy Zone Coarsening in an AlCu30 Alloy Accelerated by a Rotating Magnetic Field

Galina Kasperovich, Amber Genau, Lorenz Ratke

Publisher page

Abstract

Annealing experiments were performed on a near-eutectic Al-30 wt pct Cu alloy held in temperature gradients from 0.1 to 3 K/mm for annealing times of 10 to 500 minutes, with and without the application of rotating magnetic fields. After annealing, metallographic analysis was carried out on sections of the samples with a constant fraction solid of 10 pct. X-ray tomography was also used to create three-dimensional (3-D) reconstructions of the microstructures with a spatial resolution of approximately 1 μm. The specific surface area was measured in two dimensions and three dimensions, as well as the local curvature distribution on the 3-D reconstructed images. The microstructures show clearly that fluid flow accelerates coarsening of the mush and that the temperature gradient has a pronounced and unexpected influence on the coarsening kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · nanoparticles nucleation surface interactions · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. R. Mendoza, J. Alkemper, and P.W. Voorhees: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 481-89.10.1007/s11661-003-0084-2 ↗
2. D. Kammer and P.W. Voorhees: Acta Mater., 2006, vol. 54, pp. 1549-58.10.1016/j.actamat.2005.11.031 ↗
3. D. Kammer, R. Mendoza, and P.W. Voorhees: Scripta Mater., 2006, vol. 55, pp. 17-22.10.1016/j.scriptamat.2006.02.027 ↗
4. J.L. Fife and P.W. Voorhees: Acta Mater., 2009, vol. 57, pp. 2418-28.10.1016/j.actamat.2009.01.036 ↗
5. L. Ratke and P.W. Voorhees: Growth and Coarsening, Springer, Berlin, Germany, 2002.10.1007/978-3-662-04884-9 ↗
6. N. Limodin, E. Boller, L. Salvo, M. Suéry, and M. DiMichiel: Solidification Processing, Proc. 5th Int. Conf., H. Jones, ed., University of Sheffield, Sheffield, UK, 2007, pp. 316–20.
7. N. Limodin, L. Salvo, E. Boller, M. Suéry, M. Felberbaumd, S. Gaillièguee, and K. Madie: Acta Mater., 2009, vol. 57, pp. 2300-10.10.1016/j.actamat.2009.01.035 ↗
8. S. Terzi, L. Salvo, M.Suéry, and A.K. Dahle: Acta Mater., 2010, vol. 58, no. 1, pp. 20-30.10.1016/j.actamat.2009.08.052 ↗
9. O. Pompe and M.J. Rettenmayr: J. Cryst. Growth, 1998, vol. 192, pp. 300-06.10.1016/S0022-0248(98)00451-5 ↗
10. M. Chen and T.Z. Kattamis: Mater. Sci. Eng. A, 1998, vol. A247, p. 239.10.1016/S0921-5093(97)00720-X ↗
11. M. Rettenmayr: Int. Mater. Rev., 2009, vol. 54, pp. 1-17.10.1179/174328009X392930 ↗
12. D.J. Allen and J.D. Hunt: Metall. Trans. A, 1976, vol. 7A, pp. 767-70.10.1007/BF03186812 ↗
13. D.J. Allen and J.D. Hunt: Solidification and Casting of Metals, Proc. Int. Conf. on Solidification, Metals Society, Sheffield, London, UK, 1979, pp. 39-43.
14. B. Li, H.D. Brody, and A. Kazimirov: Metall. Mater. Trans. A, 2006, vol. 37A, pp.1039-44.10.1007/s11661-006-0076-0 ↗
15. W.B. Pfann: Trans. AIME, 1955, vol. 233, pp. 961-64.
16. E.R. Weibel: Stereological Methods, vol. 2, Academic Press, London, UK, 1980.
17. H. Nguyen Thi, B. Drevet, J.M. Debierre, D. Camel, and Y. Dabo: J. Cryst. Growth, 2003, vol. 253, p. 539.10.1016/S0022-0248(03)01041-8 ↗
18. H. Nguyen Thi, H. Jamgotchian, J. Gastaldi, J. Härtwig, T. Schenk, H. Klein, B. Billia, J. Baruchel, and Y. Dabo: J. Phys. D: Appl. Phys., 2003, vol. 36, p. A83.10.1088/0022-3727/36/10A/317 ↗
19. H. Nguyen Thi, G. Reinhart, A. Buffet, T. Schenk, N. Mangelinck-Noel, H. Jung, N. Bergeon, B. Billia, J. Härtwigc, and J. Baruchel: J. Cryst. Growth, 2008, vol. 310, pp. 2906-14.10.1016/j.jcrysgro.2008.01.041 ↗
20. H.J. Diepers, C. Beckermann, and I. Steinbach: Acta Mater., 1999, vol. 47, pp. 3663-78.10.1016/S1359-6454(99)00239-6 ↗
21. L. Ratke and W.K. Thieringer: Acta Metal., 1985, vol. 33, pp. 1793-1802.10.1016/0001-6160(85)90003-3 ↗
22. S. Steinbach and L. Ratke: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1388-94.10.1007/s11661-007-9162-1 ↗
23. L. Ratke and S. Steinbach: Int. J. Cast Metal Res., 2007, vol. 20, pp. 140-44.10.1179/136404607X239799 ↗
24. S. Steinbach and L. Ratke: Mater. Sci. Eng. A, 2005, vol. A413–A414, pp. 200-04.10.1016/j.msea.2005.09.010 ↗
25. M. Hainke, J. Friedrich, and G. Müller: J. Mater. Sci., 2004, vol. 39, pp. 2011-15.10.1023/B:JMSC.0000017762.16763.2b ↗
26. AnalySIS©, Soft Imaging System GmbH, Münster, Germany, 1986–2002, see also http://soft-imaging-web.net.
27. F.A. Nichols and W.W. Mullins: Trans. AIME, 1965, vol. 233, pp. 1840-47.
28. J.A. Dantzig and M. Rappaz: Solidification, EPFL Press, Lausanne, Switzerland, 2009.10.1201/9781439808030 ↗
29. J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructures, 2nd ed., Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511623134 ↗
30. B. Zhang, A. Griesche, and A. Meyer: Phys. Rev. Lett., 2010, vol. 104, no. 3, pp. 5902-06.10.1103/PhysRevLett.104.035902 ↗