Analysis of interfacial shear strength of SiC fiber reinforced 7075 aluminum composite by pushout microindentation
Source abstract
Abstract
The interfacial shear strength of continuous silicon carbide fiber reinforced 7075 aluminum matrix composite (SiCf/7075Al) has been investigated in this research by pushout microindentation. The SiCf/7075Al composite specimens were processed by diffusion bonding alternate layers of SiC fibers and 7075Al alloy plates. From the measured stress-displacement curves of indentation tests, the interfacial shear strengths of the composite specimens were obtained, and the stress-displacement curves were basically divided into two regions: (1) elastic deformation and (2) interface decohesion and fiber sliding. With increasing aging time, the interfacial shear strength of the composite increased to 167 MPa for T6-treated specimens, and the variation of the interfacial shear strength well followed that of the ultimate tensile strength of 7075Al matrix alloy. With decreasing specimen thickness, the interfacial shear strength of the composite and the amplitude of stress fluctuation slightly decreased because of the stress relaxation effect near specimen surfaces. Under higher indentation velocities, both the interfacial shear strength and the amplitude of stress fluctuation became smaller.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Handbook Committee: Metals Handbook, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1990, vol. 2, pp. 913–42.
2. Handbook Committee: Metals Handbook, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1990, vol. 2, pp. 840–68.
3. Handbook Committee: Metals Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1984, vol. 7, pp. 710–27.
4. D.J. Lloyd: in Composites Engineering Handbook, P.K. Mallick, ed., Marcel Dekker Inc., New York, NY, 1997, pp. 631–70.
5. S.Y. Chang, J.H. Lin, S.J. Lin, and T.Z. Kattamis: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1119–36.10.1007/s11661-999-0164-z ↗
6. K.K. Chawla: Composites Materials: Science and Engineering, 2nd ed., Springer-Verlag, New York, NY, 1998, pp. 164–211.10.1007/978-1-4757-2966-5_6 ↗
7. J.A. Dicarlo: JOM, 1985, June pp. 44–49.10.1007/BF03257712 ↗
8. M.H. Stacey: Mater. Sci. Technol., 1988, vol. 4, pp. 227–30.10.1179/mst.1988.4.3.227 ↗
9. C. Ponzi: Composite Manufacturing, 1992, vol. 3, pp. 32–38.10.1016/0956-7143(92)90181-S ↗
10. S.Y. Chang and S.J. Lin: J. Mater. Sci., 1997, vol. 32, pp. 5127–35.10.1023/A:1018621617974 ↗
11. Y.H. Hwang, C.F. Horng, S.J. Lin, K.S. Liu, and M.T. Jahn: Mater. Sci. Technol., 1997, vol. 13, pp. 982–88.10.1179/mst.1997.13.12.982 ↗
12. P.W. Jackson, A.A. Baker, and D.M. Braddick: J. Mater. Sci., 1971, vol. 6, pp. 427–35.10.1007/BF02403063 ↗
13. S. Ochiai and Y. Murakami: J. Mater. Sci., 1979, vol. 14, pp. 831–39.10.1007/BF00561304 ↗
14. C.J. Yang, S.M. Jeng, and J.M. Yang: Scripta Mater., 1990, vol. 24, pp. 469–74.10.1016/0956-716X(90)90184-I ↗
15. M.K. Brun: J. Am. Ceram. Soc., 1992, vol. 75, pp. 1914–17.10.1111/j.1151-2916.1992.tb07216.x ↗
16. I. Roman and R. Aharonov: Acta Mater., 1992, vol. 40, pp. 477–85.10.1016/0956-7151(92)90396-V ↗
17. H.Y. Liu, L.M. Zhou, and Y.W. Mai: J. Am. Ceram. Soc., 1995, vol. 78, pp. 560–66.10.1111/j.1151-2916.1995.tb08214.x ↗
18. M.C. Watson and T.W. Clyne: Acta Mater., 1992, vol. 40, pp. 141–48.10.1016/0956-7151(92)90207-U ↗
19. D. Tripathi, T. Turton, F. Chen, and F.R. Jones: J. Mater. Sci., 1997, vol. 32, pp. 4759–65.10.1023/A:1018631030753 ↗
20. L.T. Drzal and M. Madhukar: J. Mater. Sci., 1993, vol. 28, pp. 569–610.10.1007/BF01151234 ↗
21. L.G. Chen and S.J. Lin: J. Electrochem. Soc., 2002, vol. 149, pp. C383-C389.10.1149/1.1485082 ↗
22. J.A. McElman: Engineered Materials Handbook, ASM INTERNATIONAL, Metals Park, OH, 1987, vol. 1, p. 858.
23. H. Cherouali, G. Fantozzi, P. Reynaud, and D. Rouby: Mater. Sci. Eng. A, 1998, vol. A250, pp. 169–77.10.1016/S0921-5093(98)00589-9 ↗
24. K. Dinesh and J. Shetty: J. Am. Ceram. Soc., 1998, vol. 71, pp. C107-C109.
25. S.Y. Chang SY, S.J. Lin, and M.C. Flemings: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 291–98.10.1007/s11661-000-0073-7 ↗
26. E. Kumacheva: Progr. Surface, 1998, vol. 58, pp. 75–120.10.1016/S0079-6816(98)00017-3 ↗
27. L.J. Ghosn, J.I. Eldridge, and P. Kantzos: Acta Mater., 1994, vol. 42, pp. 3895–908.10.1016/0956-7151(94)90455-3 ↗
28. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy—Principles and Applications, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1984, pp. 570–72.