Method of Estimating the Long-term Rupture Strength of 11Cr-2W-0.4Mo-1Cu-Nb-V Steel
Source abstract
Abstract
Long-term rupture data of 11Cr-2W-0.4Mo-1Cu-Nb-V steel were analyzed using an exponential equation for stress regarding time to rupture as a thermal activation process. The fitness was compared with the usually employed method assuming power-law creep. In the exponential method, rupture data are classified into several groups according to the thermal activation process; the activation energy, Q; the activation volume, V; then, the Larson–Miller constant, C, values are calculated, and a regression equation is obtained for each data group. The fitness level of the equation was satisfactorily high for each group. The values of Q, V, and C were unusually small for a data group where an unexpected drop in rupture strength was observed. The critical issue is how to comprehend signs of degradation within the short term. We can observe several signs at a creep time of approximately one-tenth of the times of the degradation events. The small values of Q and V indicate that completely softened regions form and creep locally, which is consistent with previous observations. From both metallurgical considerations and the variations of Q and V, it is suggested that the rate of the unexpected drop in strength is mitigated after further long-term creep.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. V.K. Sikka, C.T. Word, and K.C. Thomas: Ferritic Steels for High Temperature Applications, A.K. Khave, ed., ASM Int., Metals Park, OH, 1983, pp. 65–84.
2. F. Masuyama: ISIJ Int., 2001, vol. 41, pp. 612-25.10.2355/isijinternational.41.612 ↗
3. F. Masuyama: Int. J. Pressure Vessel and Piping, 2007, vol. 84, pp. 53-61.10.1016/j.ijpvp.2006.09.006 ↗
4. F.R. Larson and J. Miller: Trans. ASME, 1952, vol. 74, pp. 765-75.
5. NIMS CREEP DATA SHEET (0.2C, JIS STB 410, tubes), No. 7B, C. Tanaka, ed., National Institute for Materials Science (NIMS), Tsukuba, 1992, pp. 1–23.
6. J. Glen and R.R. Barr: High Temperature Properties of Steels, 1966, Proc. of the Joint Conf. Organized by the British Iron and Steel Research Association and the Iron and Steel Institute at the Grand Hotel Eastbourne, ISI Publication 97, The Iron and Steel Institute, London, 1967, pp. 225–26.
7. S. Yokoi, N. Shinya, H. Kushima, and H. Tanaka: Tetsu-to-Hagane, 1982, vol. 68, pp. 982-8.10.2355/tetsutohagane1955.68.8_982 ↗
8. K. Kimura, H. Kushima, K. Yagi, and C. Tanaka: Tetsu-to-Hagane, 1991, vol. 77, pp. 667-74.10.2355/tetsutohagane1955.77.5_667 ↗
9. F. Abe: Ferrum, 2006, vol. 11, pp. 197-207.
10. H. Kushima, K. Kimura, and F. Abe: Tetsu-to-Hagane, 1999, vol. 85, pp. 841-7.10.2355/tetsutohagane1955.85.11_841 ↗
11. K. Suzuki, S. Kumai, H. Kushima, K. Kimura, F. Abe: Tetsu-to-Hagane, 2000, vol. 86, pp. 550-7.10.2355/tetsutohagane1955.86.8_550 ↗
12. V. Sklenicka, K. Kucharova, M. Svoboda, L. Kloc, J. Bursik, and A. Kroupa: Mater. Character., 2003, vol. 51, pp. 35-48.10.1016/j.matchar.2003.09.012 ↗
13. Y. Kadoya and E. Shimizu: Tetsu-to-Hagane, 1999, vol. 85, pp. 827-34.10.2355/tetsutohagane1955.85.11_827 ↗
14. K. Kimura, K. Sawada, K. Kubo, and H. Kushima: ASME-PVP, 2004, vol. 47, pp. 11-18.
15. NIMS CREEP DATA SHEET (11Cr-2W-0.4Mo-1Cu-Nb-V, KA-SUS 410J3 TP, pipes, KA-SUS 410J3, plates, and KA-SUS 410J3 TB, tubes), No. 51A, T. Ogata, ed., NIMS, Tsukuba, 2013, pp. 1–54.
16. M. Tamura, F. Abe, K. Shiba, H. Sakasegawa and H. Tanigawa: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2645-61.10.1007/s11661-013-1631-0 ↗
17. M. Tamura, H. Esaka and K. Shinozuka: ISIJ Int., 1999, vol. 39, pp. 380-7.10.2355/isijinternational.39.380 ↗
18. M. Tamura, H. Esaka and K. Shinozuka: Mater. Trans., 2003, vol. 44, pp. 118-26.10.2320/matertrans.44.118 ↗
19. T. Mura and T. Mori: Maikuromekanikkusu (Micromechanics), Baihu-kan, Tokyo, 1976, pp. 99-108.
20. F.H. Norton: The Creep of Steel at High Temperatures, McGraw-Hill Book Co., New York, 1929, pp. 1-90.
21. H. Oikawa: The Technology Reports of the Tohoku University, vol. 47, Tohoku University, Sendai, 1982, pp. 67-77.
22. F.C. Monkman and N.J. Grant: ASTM, 1956, vol. 56, pp. 593-620.
23. A.H. Sully: Metallic Creep and Creep Resistant Alloys, Butterworths Scientific Pub., London, 1949, pp. 37-57.
24. A. Iseda, Y. Sawaragi, S. Kato, and F. Masuyama: 5th Int. Conf. on Creep of Materials, Creep: Characterization, Damage and Life Assessment, 1992, ASM, Materials Park, pp. 389–98.
25. F. Abe, H. Araki, and T. Noda: Metall. Trans A, 1991, vol. 22A, pp. 2225-35.10.1007/BF02664988 ↗
26. A. Strang and V. Vodarek: Mater. Sci. Technol., 1996, vol. 12, pp. 552-6.10.1179/mst.1996.12.7.552 ↗
27. K. Sawada, H. Kushima, K. Kimura, and M. Tabuchi: ISIJ Int., 2007, vol. 47, pp. 733-9.10.2355/isijinternational.47.733 ↗
28. K. Sawada, H. Kushima, and K. Kimura: ISIJ Int., 2006, vol. 46, pp. 769-75.10.2355/isijinternational.46.769 ↗
29. H.K. Danielsen and J. Hald: Energy Materials, 2006, vol. 1, pp. 49-57.10.1179/174892306X99732 ↗
30. H.K. Danielsen and J. Hald: VGB Power Technol., 2009, vol. 5, pp. 68-73.
31. C. Kocer, T. Abe, and A. Soon: Mater. Sci. Eng. A, 2009, vol. 505, pp. 1-5.10.1016/j.msea.2008.10.028 ↗
32. H.K. Danielsen: Ph.D. Thesis, 2007, Technical University of Denmark.
33. A. Golpayegani, H-O. Andren, H. Danielsen, and J. Hald: Mater. Sci. Eng. A, 2008, vol. 489, pp. 310-18.10.1016/j.msea.2007.12.022 ↗
34. R.O. Kaibyshev, V.N. Skorobogatykh, and I.A. Schenkova: Metal Sci. Heat Treatment, 2010, vol. 52, pp. 90-99.10.1007/s11041-010-9239-0 ↗
35. K. Kimura, H. Kushima, and F. Abe: Key Eng. Mater., 2000, vols. 171-174, pp. 483-90.10.4028/www.scientific.net/KEM.171-174.483 ↗
36. K. Kimura, K. Suzuki, Y. Toda, H. Kushima, and F. Abe: Proc. 7th Liege Conf. on Mater. For Advanced Power Eng. 2002, Forschungszentrum, Julich, 2002, pp. 1171–80.
37. K. Suzuki: Dr. Thesis, 2002, Tokyo Institute of Technology.
38. K. Miki, T. Azuma, T. Ishiguro, R. Hashizume, Y. Murata, and M. Morinaga: Proc. 7th Liege Conf. on Mater. For Advanced Power Eng. 2002, Forschungszentrum, Julich, 2002, pp. 1497–504.
39. F. Abe: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 321-32.10.1007/s11661-005-0305-y ↗
40. M. Yoshizawa and M. Igarashi: Proc. Int. Conf. on Creep and Fracture in High Temperature Components, Destech. Pub., London, 2005, pp. 110–18.
41. NIMS CREEP DATA SHEET (JIS STBA 2, 9Cr-1Mo, tubes), No. 19B, H. Irie, ed., NIMS, Tsukuba, 1997, pp. 1–29.
42. NIMS CREEP DATA SHEET (KA-STBA 27, 9Cr-2Mo, tubes), No. 46A, S. Matsuoka, ed., NIMS, Tsukuba, 2005, pp. 1–15.
43. K. Sawada, M. Taneike, K. Kimura, and F. Abe: ISIJ Int., 2004, vol.44, pp. 1243-9.10.2355/isijinternational.44.1243 ↗
44. T. Azuma, K. Miki, Y. Tanaka, and T. Ishiguro: Tetsu-to-Hagane, 2002, vol. 88, pp. 678-85.10.2355/tetsutohagane1955.88.10_678 ↗
45. L. Lundin, M. Norell, H.-O. Andren, and L. Nyborg: Scan. J. Metall., 1997, vol. 26, pp. 27-40.
46. L. Lundin, S. Fallman, and H.-O. Andren: Mat. Sci. Technol., 1997, vol. 13, pp. 233-42.10.1179/mst.1997.13.3.233 ↗
47. K. Narita, S. Koyama, and T. Ishii: Tekkokisokyodokenkyukai, Biryogensobukai, V-kenkyukai-kyodohokokusho, ISIJ, Tokyo, 1970, pp. 1-15.
48. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153-90.10.1016/0364-5916(85)90021-5 ↗
49. J. Glen: J. Iron Steel Inst., 1958, vol. 189, pp. 333-43.
50. Z. Kubon, V. Foldyna, and V. Vodarek: Microstructural Stability of Creep Resistant Alloys for High Temperature Plant, A. Strang, T. Canley, and G.W. Greenwood, eds., Institute of Materials, London, 1998, pp. 257–70.
51. M. Tamura, K. Ikeda, H. Esaka, and K. Shinozuka: ISIJ. Int., 2001, vol. 41, pp. 908-14.10.2355/isijinternational.41.908 ↗
52. M. Tamura, H. Iida, H. Kusuyama, K. Shinozuka, and H. Esaka: ISIJ Int., 2004, vol. 44, pp. 153-61.10.2355/isijinternational.44.153 ↗
53. M. Tamura, H. Kusuyama, K. Shinozuka, and H. Esaka: ISIJ Int., 2007, vol. 47, pp. 317-26.10.2355/isijinternational.47.317 ↗
54. M. Tamura, M. Nakamura, K. Shinozuka, and H. Esaka: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1060-76.10.1007/s11661-008-9486-5 ↗
55. M. Cohen: Trans. JIM, 1968, vol. 9 Supplement, pp. XXIII–XXIX.
56. M. Tamura, Y. Haruguchi, M. Yamashita, Y. Nagaoka, K. Ohinata, K. Ohnishi, E. Itoh, H. Ito, K. Shinozuka, and H. Esaka: ISIJ Int., 2006, vol. 46, pp. 1693-702.10.2355/isijinternational.46.1693 ↗
57. M. Tamura, H. Sakasegawa, K. Shiba, H. Tanigawa, K. Shinozuka, and H. Esaka: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2176-88.10.1007/s11661-011-0640-0 ↗
58. M. Tamura: Ferrum, 2009, vol. 14, pp. 17-22.