journal article·2012-06

Metastable Phases of Dross Particles Formed in a Molten Zinc Bath and Prediction of Soluble Aluminum During Galvannealing Processes

Doo-Jin Paik, Moon-Hi Hong, Yoon Huh, Joo Hyun Park, Hong-Kook Chae, Seok-Ho Park, Si-Youl Choun

Publisher page

Abstract

The morphology, chemistry, and crystallographic characteristics of metastable dross particles were identified. These particles are formed during the initial stage of precipitation. The particles had aluminum concentrations of 15 to 80 mass pct, with values that decreased gradually as particle size increased. These metastable dross particles were a mixture of the crystalline phase of FeZn10, which is called the “delta phase,” and the high-aluminum amorphous phase, which covered the surface of the crystalline phase. The new “meta Q” concept was proposed to predict the amount of soluble aluminum in the zinc bath by considering nucleation kinetics and particle growth. The results calculated using the “meta Q” concept were compared with the values measured by the aluminum sensor, which were taken during the same period at the commercial galvanizing line. The mean of the absolute values of the differences between the calculated and measured values was 9.7 ppm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bauxite Residue and Utilization · Aluminum Alloy Microstructure Properties · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. T. Kato, K. Nunome, K. Kaneko, and H. Saka: Acta Mater., 2000, vol. 48, pp. 2257–62.10.1016/S1359-6454(00)00037-9 ↗
2. D. Paik, M. Hong, and Y. Jin: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’04), Chicago, IL, 2004, pp. 481–90.
3. S. Yamaguchi: Proc. 4th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’98), Chiba, Japan, 1998, pp. 84–89.
4. Y.H. Liu, T.A.E. Comrmode, A.B. Filc, and N.Y. Tang: Proc Galvanizers Association, Charleston, SC, 2004, pp. 1–7.
5. N.Y. Tang: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 144–48.10.1007/s11663-999-0015-8 ↗
6. M. Giorgi, J. Guillot, and R. Nicolle: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’04), Chicago, IL, 2004, pp. 703–12.
7. G.M. Michal, D. Paik, and M. Hong: Proc. 8th Int. Conf on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’11), Genova, Italy, 2011, CD-ROM paper in HDG Process Technologies—Dross Session.
8. J. McDermid, E. Baril, and W. Thompson: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’04), Chicago, IL, 2004, pp. 491–99.
9. N.Y. Tang: J Phase Equilib., 2000, vol. 21, pp. 70–77.10.1361/105497100770340444 ↗
10. Y. Liu and N.Y. Tang: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’04), Chicago, IL, 2004, pp. 1155–64.
11. N.Y. Tang and X. Su: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 1559–61.10.1007/s11661-002-0078-5 ↗
12. F. Ajersch, L. Trepanier, and F. Goodwin: Proc. 44th MWSP Conf., 2002, vol. XL, pp. 771–80.
13. R.S. Patil: Proc. of the Galvanizers Association, Hermitage, PA, 1991, pp. 53–61.
14. D. Paik, M. Kim, C. Jee, Y. Jin, and J. Noh: Proc. 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’07), Osaka, Japan, 2007, pp. 315–20.
15. J.H. Park, G.H. Park, D. Paik, Y. Huh, and M.H. Hong: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 195–207.10.1007/s11661-011-0857-y ↗
16. Y. Huh, D. Paik, J.H. Park, M. Hong, and G.M. Michal: Ultramicroscopy, in press.
17. E. Ave, Y. Yan, and S.J. Pennycook: Nat. Mater., 2004, vol. 3, pp. 759–67.10.1038/nmat1244 ↗
18. A.P. Tsai: Physical Properties of Quasicrystals, Z.M. Stadnik, ed., Springer, New York, NY, 1999, pp. 5–50.10.1007/978-3-642-58434-3_2 ↗
19. J.W. Chan: J. Res. Nat. Inst. Stan. Tech., 2001, vol. 106, pp. 975–82.10.6028/jres.106.049 ↗
20. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, Van Nostrand Reinhold Co., New York, NY, 1981.
21. G. Vourlias, N. Pistofidis, G. Stergioudis, and E.K. Polychroniadis: Solid State Sci., 2005, vol. 7, pp. 465–74.10.1016/j.solidstatesciences.2004.11.001 ↗
22. F.E. Goodwin: Proc. Galvanizers Association, Portland, OR, 2001, pp. 1–6.