journal article·2022-05

Microstructural Evolution in Additively Manufactured Fe-Cr-Ni Maraging Stainless Steel

Ayda Shahriari, Mehdi Sanjari, Hadi Pirgazi, Fateh Fazeli, Babak Shalchi Amirkhiz, Leo A. I. Kestens, Mohsen Mohammadi

Publisher page

Abstract

In this work, the effect of heating rate on the phase transformation temperatures was investigated using dilatometry analysis. Continuous heating and isothermal holding above Ac3 temperature on microstructural evolutions in additively manufactured (AM) parts of Fe-Cr-Ni maraging stainless steel were studied. The microstructural features developed within the heating processes were characterized employing electron backscatter diffraction and transmission electron microscopy. Austenite reversion was found to take place in two steps for the AM parts by a diffusive mechanism as well as the precipitation reactions. Although grain refinement occurred during the austenite reversion of the continuously heated samples, the microstructure showed a coarser grain size after isothermal heating. The crystallographic orientations developed after the heating processes were different from those of the initial ones implying the absence of the austenite memory effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. R. Singh, A. Gupta, O. Tripathi, S. Srivastava, B. Singh, A. Awasthi, S.K. Rajput, P. Sonia, P. Singhal, and K.K. Saxena: Mater. Today Proc., 2020, vol. 26, pp. 3058–70.10.1016/j.matpr.2020.02.635 ↗
2. I. Gibson, D.W. Rosen, and B. Stucker: Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, 1st ed. Springer, Boston, 2010, pp. 36–58.10.1007/978-1-4419-1120-9 ↗
3. P. Krakhmalev, I. Yadroitsava, G. Fredriksson, and I. Yadroitsev: Mater. Des., 2015, vol. 87, pp. 380–85.10.1016/j.matdes.2015.08.045 ↗
4. T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster, and D. Schwarze: Metall. Mater. Trans. B., 2013, vol. 44B, pp. 794–6.10.1007/s11663-013-9875-z ↗
5. L. Thijs, M.L. MonteroSistiaga, R. Wauthle, Q. Xie, J.P. Kruth, and J. Van Humbeeck: Acta Mater., 2013, vol. 61, pp. 4657–68.10.1016/j.actamat.2013.04.036 ↗
6. K. Kunze, T. Etter, J. Grässlin, and V. Shklover: Mater. Sci. Eng. A., 2015, vol. 620, pp. 213–22.10.1016/j.msea.2014.10.003 ↗
7. B. Vrancken, L. Thijs, J.P. Kruth, and J. Van Humbeeck: J. Alloys Compd., 2012, vol. 541, pp. 177–85.10.1016/j.jallcom.2012.07.022 ↗
8. T. Sercombe, N. Jones, R. Day, and A. Kop: Rapid Prototyp. J., 2008, vol. 14, pp. 300–04.10.1108/13552540810907974 ↗
9. Stainless steel for metal 3D printers| EOS GmbH, (n.d.). https://www.eos.info/en/additive-manufacturing/3d-printing-metal/dmls-metal-materials/stainless-steel. Accessed 19 May 2021.
10. A. Hadadzadeh, A. Shahriari, B.S. Amirkhiz, J. Li, and M. Mohammadi: Mater. Sci. Eng. A., 2020, vol. 787, p. 139470.10.1016/j.msea.2020.139470 ↗
11. V.K. Vasudevan, S.J. Kim, and C.M. Wayman: Metall. Trans. A., 1990, vol. 21A, pp. 2655–68.10.1007/BF02646061 ↗
12. R.J. Hamlin and J.N. DuPont: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 246–64.10.1007/s11661-016-3851-6 ↗
13. S. Morito, Y. Adachi, and T. Ohba: Mater. Trans., 2009, vol. 50, pp. 1919–23.10.2320/matertrans.MRA2008409 ↗
14. C. Cayron, A. Baur, and R. Logé: Mater. Des., 2018, vol. 154, pp. 81–95.10.1016/j.matdes.2018.05.033 ↗
15. N.D. Zemtsova, I.G. Kabanova, and E.I. Anufrieva: Phys. Met. Metallogr., 2008, vol. 105, pp. 19–35.10.1134/S0031918X08010031 ↗
16. J.M. Pardal, S.S.M. Tavares, M.P. Cindra Fonseca, H.F.G. Abreu, and J.J.M. Silva: J. Mater. Sci., 2006, vol. 41, pp. 2301–07.10.1007/s10853-006-7170-y ↗
17. U.K. Viswanathan, G.K. Dey, and V. Sethumadhavan: Mater. Sci. Eng. A., 2005, vol. 398, pp. 367–72.10.1016/j.msea.2005.03.074 ↗
18. C. Garcia, L.F. Alvarez, and M. Carsi: Weld. Int., 1992, vol. 6, pp. 612–21.10.1080/09507119209548251 ↗
19. L.F. Alvarez, C. Garcia, and V. Lopez: ISIJ Int., 1994, vol. 34, pp. 516–21.10.2355/isijinternational.34.516 ↗
20. C.A. Apple and G. Krauss: Acta Metall., 1972, vol. 20, pp. 849–56.10.1016/0001-6160(72)90077-6 ↗
21. J. Jeleńkowski: J. Mater. Process. Technol., 1997, vol. 64, pp. 207–14.10.1016/S0924-0136(96)02569-1 ↗
22. M. Enomoto and E. Furubayashi: Trans. JIM., 1977, vol. 18, pp. 817–24.10.2320/matertrans1960.18.817 ↗
23. C.N. Hsiao, C.S. Chiou, and J.R. Yang: Mater. Chem. Phys., 2002, vol. 74, pp. 134–42.10.1016/S0254-0584(01)00460-6 ↗
24. M. Farooque, H. Ayub, A. Ul Haq, and A.Q. Khan: J. Mater. Sci., 1998, vol. 33, pp. 2927–30.10.1023/A:1004346412079 ↗
25. P.P. Sinha, D. Sivakumar, N.S. Babu, K.T. Tharian, and A. Natarajan: Steel Res., 1995, vol. 66, pp. 490–94.10.1002/srin.199501160 ↗
26. S.J. Kim and C.M. Wayman: Mater. Sci. Eng. A., 1990, vol. 128, pp. 217–30.10.1016/0921-5093(90)90230-Z ↗
27. M. Sanjari, A. Hadadzadeh, H. Pirgazi, A. Shahriari, B.S. Amirkhiz, L.A.I. Kestens, and M. Mohammadi: Mater. Sci. Eng. A., 2020, vol. 786, pp. 139–365.10.1016/j.msea.2020.139365 ↗
28. H. Pirgazi, M. Sanjari, S. Tamimi, B. Shalchi Amirkhiz, L.A.I. Kestens, and M. Mohammadi: J. Mater. Sci., 2021, vol. 56, pp. 844–53.10.1007/s10853-020-05290-2 ↗
29. S. Pasebani, M. Ghayoor, S. Badwe, H. Irrinki, and S.V. Atre: Addit. Manuf., 2018, vol. 22, pp. 127–37.
30. S. Cheruvathur, E.A. Lass, and C.E. Campbell: JOM., 2016, vol. 68, pp. 930–42.10.1007/s11837-015-1754-4 ↗
31. M. Hunkel, H. Surm, and M. Steinbacher: Handb. Therm. Anal. Calorim., 2018, vol. 6, pp. 103–29.10.1016/B978-0-444-64062-8.00019-X ↗
32. G. Mohapatra, F. Sommer, and E.J. Mittemeijer: Thermochim. Acta., 2007, vol. 453, pp. 31–41.10.1016/j.tca.2006.11.007 ↗
33. H.K.D.H. Bhadeshia: Prog. Mater. Sci., 1985, vol. 29, pp. 321–86.10.1016/0079-6425(85)90004-0 ↗
34. L. Delaey: Diffusionless Transformations, in: Mater. Sci. Technol, Wiley-VCH Verlag GmbH & Co. KGaA, 2013, pp. 583–654.10.1002/352760264X.ch9 ↗
35. H. Li, K. Gai, L. He, C. Zhang, H. Cui, and M. Li: Mater. Des., 2016, vol. 92, pp. 731–41.10.1016/j.matdes.2015.12.110 ↗
36. H.S. Yang and H.K.D.H. Bhadeshia: Uncertainties in dilatometric determination of martensite start temperature. Mater. Sci. Technol., 2013, vol. 23, pp. 556–60.10.1179/174328407X176857 ↗
37. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley Publishing Co, Inc, 1978, pp. 407–17.
38. A. Yadollahi, N. Shamsaei, S.M. Thompson, and D.W. Seely: Mater. Sci. Eng. A., 2015, vol. 644, pp. 171–83.10.1016/j.msea.2015.07.056 ↗
39. P. Tan, F. Shen, B. Li, K. Zhou: Mater. Des, 2019, vol. 168, pp. 107642.10.1016/j.matdes.2019.107642 ↗
40. L. Facchini, N. Vicente, I. Lonardelli, E. Magalini, P. Robotti, and M. Alberto: Adv. Eng. Mater., 2010, vol. 12, pp. 184–88.10.1002/adem.200900259 ↗
41. R. Schnitzer, R. Radis, M. Nöhrer, M. Schober, R. Hochfellner, S. Zinner, E. Povoden-Karadeniz, E. Kozeschnik, and H. Leitner: Mater. Chem. Phys., 2010, vol. 122, pp. 138–45.10.1016/j.matchemphys.2010.02.058 ↗
42. R.A. Abrahams: The Development of High Strength Corrosion Resistant, PhD dissertation, The Pennsylvania State University, 2010.
43. E. Gomes de Araujo, H. Pirgazi, M. Sanjari, M. Mohammadi, and L.A.I. Kestens: J. Appl. Crystallogr., 2021, vol. 54, pp. 569–79.10.1107/S1600576721001394 ↗
44. H.L. Wei, J. Mazumder, and T. DebRoy: Sci. Rep., 2015, vol. 5, pp. 1–7.
45. M.A. Valdes-Tabernero, C. Celada-Casero, I. Sabirov, A. Kumar, and R.H. Petrov: Mater. Charact., 2019, vol. 155, p. 109822.10.1016/j.matchar.2019.109822 ↗
46. S. Suwas and R.K. Ray: Crystallographic Texture of Materials, 1st ed. Springer, London, 2014, pp. 73–93.10.1007/978-1-4471-6314-5_4 ↗
47. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31.10.1016/j.actamat.2006.07.009 ↗
48. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
49. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
50. T. Lee, H. Bian, K. Aoyagi, H. Ohnishi, T. Hino, Y. Nakatani, and A. Chiba: Fabricating 9–12 Cr ferritic/martensitic steels using selective electron beam melting. Mater. Lett., 2020, vol. 271, p. 127747.10.1016/j.matlet.2020.127747 ↗
51. H. Pirgazi, M. Sanjari, S. Tamimi, B. ShalchiAmirkhiz, L.A.I. Kestens, and M. Mohammadi: Texture evolution in selective laser melted maraging stainless steel CX with martensitic transformation. J. Mater. Sci., 2021, vol. 56, pp. 844–53.10.1007/s10853-020-05290-2 ↗
52. P. Song, W. Liu, C. Zhang, L. Liu, and Z. Yang: ISIJ Int., 2016, vol. 56, pp. 148–53.10.2355/isijinternational.ISIJINT-2015-280 ↗
53. X. Zhang, G. Miyamoto, Y. Toji, S. Nambu, T. Koseki, and T. Furuhara: Acta Mater., 2018, vol. 144, pp. 601–12.10.1016/j.actamat.2017.11.003 ↗
54. H. Shirazi, G. Miyamoto, S. Hossein Nedjad, T. Chiba, M. Nili Ahmadabadi, and T. Furuhara: Acta Mater., 2018, vol. 144, pp. 269–80.10.1016/j.actamat.2017.10.068 ↗
55. J.W. Christian: The Theory of Transformations in Metals and Alloys, 1st ed., Pergamon, 2002, pp. 1–1107.10.1016/B978-008044019-4/50005-2 ↗
56. F. Niessen, D. Apel, F. Danoix, J. Hald, and M.A.J. Somers: Mater. Charact., 2020, vol. 167, p. 110494.10.1016/j.matchar.2020.110494 ↗
57. S. J. Pennycook and P. D. Nellist, Eds: Scanning Transmission Electron Microscopy, 1st ed., Springer, New York, 2011, pp. 91–115.10.1007/978-1-4419-7200-2 ↗
58. R. Kapoor, L. Kumar, and I.S. Batra: Mater. Sci. Eng. A., 2003, vol. 352, pp. 318–24.10.1016/S0921-5093(02)00934-6 ↗
59. A. Borgenstam and M. Hillert: Acta Mater., 2000, vol. 48, pp. 2765–75.10.1016/S1359-6454(00)00102-6 ↗
60. A. Bojack, L. Zhao, P.F. Morris, and J. Sietsma: Metall. Mater. Trans. A., 2016, vol. 47, pp. 1996–2009.10.1007/s11661-016-3404-z ↗
61. F. Niessen, M. Villa, J. Hald, and M.A.J. Somers: Mater. Des., 2017, vol. 116, pp. 8–15.10.1016/j.matdes.2016.11.076 ↗
62. D. Brandl, M. Lukas, M. Stockinger, S. Ploberger, and G. Ressel: Mater. Des., 2019, vol. 176, pp. 107–841.10.1016/j.matdes.2019.107841 ↗
63. D.A. Karlyn, J.W. Cahn, M. Cohen: The Massive Transformation in Cu-Zn Alloys, in: Sel. Work. John W. Cahn, Wiley, 2013, pp. 231–235.10.1002/9781118788295.ch23 ↗
64. S. Gao, Z. Hu, M. Duchamp, P.S.S.R. Krishnan, S. Tekumalla, X. Song, and M. Seita: Acta Mater., 2020, vol. 200, pp. 366–77.10.1016/j.actamat.2020.09.015 ↗
65. K. Saeidi: Stainless steels fabricated by laser melting: Scaled-down structural hierarchies and microstructural heterogeneities, PhD dissertation, Stockholm University, 2016.
66. K.K. Alaneme and E.A. Okotete: J. Sci. Adv. Mater. Devices., 2019, vol. 4, pp. 19–33.10.1016/j.jsamd.2018.12.007 ↗
67. C. Celada-Casero, J. Sietsma, and M.J. Santofimia: Mater. Des., 2019, vol. 167, pp. 107–625.10.1016/j.matdes.2019.107625 ↗
68. K. Huang and R.E. Logé: Mater. Des., 2016, vol. 111, pp. 548–74.10.1016/j.matdes.2016.09.012 ↗
69. M. Rout, R. Ranjan, S.K. Pal, and S.B. Singh: Mater. Sci. Eng. A., 2018, vol. 711, pp. 378–88.10.1016/j.msea.2017.11.059 ↗
70. P.D. Bilmes, M. Solari, and C. Llorente: Mater. Charact., 2001, vol. 46, pp. 285–96.10.1016/S1044-5803(00)00099-1 ↗
71. R.H. Petrov, J. Sidor, and L.A.I. Kestens: Mater, Trans Tech Publications Ltd, Sci. Forum, 2012, pp. 798–801.
72. R.K. Rayj, J. Jonas, and M.P. Butron Guillen: ISIJ Int., 1994, vol. 34, pp. 927–42.10.2355/isijinternational.34.927 ↗