Effect of Nb and Mo on Austenite Microstructural Evolution During Hot Deformation in Boron High Strength Steels
Source abstract
Abstract
Abstract This work has focused on the study of hot working behavior of boron high strength steels microalloyed with different combinations of Nb and/or Mo. The role of Nb and Mo during the hot deformation of low carbon steels is well known: both mainly retard austenite recrystallization, leading to pancaked austenite microstructures before phase transformation and to refined room temperature microstructures. However, the design of rolling schedules resulting in properly conditioned microstructures, requires microstructural evolution models that take into account the effect of the different alloying elements. In this specific case, the effect that high levels of molybdenum (0.5 pct) have in the recrystallization delay was evaluated. In that respect, hot torsion tests were performed in this work to investigate the microstructural evolution during hot deformation of four boron steels, with different Nb (0.025 pct) and Mo (0.5 pct) combinations. The retardation in recrystallization kinetics was modeled in all cases and measured kinetics agree with those predicted by equations previously developed for Nb–Mo microalloyed steels with lower Mo concentrations (< 0.3 pct). The strain-induced precipitation in the Nb and Nb–Mo bearing steels was also characterized. Finally, the fractional softening evolution during multipass rolling simulations was compared with MicroSim® model predictions, showing a good agreement with experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. I. Zurutuza, N. Isasti, E. Detemple, V. Schwinn, H. Mohrbacher, and P. Uranga: Metals, 2021, vol. 11(1), art. no. 29. https://doi.org/10.3390/met11010029.10.3390/met11010029 ↗
2. I. Zurutuza, N. Isasti, E. Detemple, V. Schwinn, H. Mohrbacher, and P. Uranga: Metals., 2021, vol. 11(1), art. no. 95. https://doi.org/10.3390/met11010095.10.3390/met11010095 ↗
3. H. Mohrbacher: Metals., 2018, vol. 8(4), art no. 234. https://doi.org/10.3390/met8040234.10.3390/met8040234 ↗
4. X.L. He, M. Djahazi, J.J. Jonas, and J. Jackman: Acta Met. Mater., 1991, vol. 39(10), pp. 2295–308. https://doi.org/10.1016/0956-7151(91)90012-P.10.1016/0956-7151(91)90012-P ↗
5. I. Zurutuza, N. Isasti, E. Detemple, V. Schwinn, H. Mohrbacher, and P. Uranga: JOM., 2021, vol. 73, pp. 3158–68. https://doi.org/10.1007/s11837-021-04773-0.10.1007/s11837-021-04773-0 ↗
6. M.G. Akben, B. Bacroix, and J.J. Jonas: Acta Metall., 1983, vol. 31(1), pp. 161–74. https://doi.org/10.1016/0001-6160(83)90076-7.10.1016/0001-6160(83)90076-7 ↗
7. B. Pereda, B. López and J.M. Rodriguez-Ibabe: Int. Conf. Microalloyed Steels Process Microstruct. Prop. Perform. Proc., Pittsburgh, PA, USA, July 2007, pp. 151–59.
8. C. Klinkenberg, K. Hulka, and W. Bleck: Steel Res. Int., 2004, vol. 75, pp. 746–54. https://doi.org/10.1002/srin.200405837.10.1002/srin.200405837 ↗
9. E.J. Palmiere, C.I. García, and A.J. DeArdo: Metall. Mater. Trans. A., 1996, vol. 27A, pp. 951–60. https://doi.org/10.1007/BF02649763.10.1007/BF02649763 ↗
10. A.I. Fernandez, B. Lopez, and J.M. Rodriguez-Ibabe: Scripta Mater., 1999, vol. 40(5), pp. 543–49. https://doi.org/10.1016/S1359-6462(98)00452-7.10.1016/S1359-6462(98)00452-7 ↗
11. L. Llanos, B. Pereda, and B. Lopez: Metall. Mater. Trans. A., 2015, vol. 46A, pp. 5248–65. https://doi.org/10.1007/s11661-015-3066-2.10.1007/s11661-015-3066-2 ↗
12. T.J. Ballard, J.G. Speer, K.O. Findley, and E. De Moor: Sci. Rep., 2021, vol. 11, art no. 1495. https://doi.org/10.1038/s41598-021-81139-1.10.1038/s41598-021-81139-1 ↗
13. D.Q. Bai, S. Yue, W.P. Sun, and J.J. Jonas: Metall. Mater. Trans. A., 1993, vol. 24A, pp. 2151–59. https://doi.org/10.1007/BF02648589.10.1007/BF02648589 ↗
14. S. Vervynckt: Control of the Non-Recrystallization Temperature in High Strength Low Alloy (HSLA) Steels, Ghent University, Ghent, Belgium, 2010. http://hdl.handle.net/1854/LU-4333753.
15. S.F. Medina and A. Quispe: ISIJ Int., 2001, vol. 41(7), pp. 774–81. https://doi.org/10.2355/isijinternational.41.774.10.2355/isijinternational.41.774 ↗
16. B. Pereda, J.M. Rodriguez-Ibabe, and B. Lopez: ISIJ Int., 2008, vol. 48(10), pp. 1457–66. https://doi.org/10.2355/isijinternational.48.1457.10.2355/isijinternational.48.1457 ↗
17. M. Hoerner, J. Speer, and M. Eberhart: ISIJ Int., 2017, vol. 57(10), pp. 1847–50. https://doi.org/10.2355/isijinternational.ISIJINT-2017-096.10.2355/isijinternational.ISIJINT-2017-096 ↗
18. S. Medina and J. Mancilla: ISIJ Int., 1996, vol. 36(8), pp. 1063–69. https://doi.org/10.2355/isijinternational.36.1063.10.2355/isijinternational.36.1063 ↗
19. M. Akben, T. Chandra, P. Plassiard, and J.J. Jonas: Acta Metall., 1984, vol. 32(4), pp. 591–601. https://doi.org/10.1016/0001-6160(84)90070-1.10.1016/0001-6160(84)90070-1 ↗
20. L. Karlsson and H. Norden: Le J. Phys. Colloq., 1986, vol. 47(C7), pp. C7-257–62. https://doi.org/10.1051/jphyscol:1986744.10.1051/jphyscol:1986744 ↗
21. J.E. Morral and W.F. Jandeska: Metall. Mater. Trans. A., 1980, vol. 11A, pp. 1628–29. https://doi.org/10.1007/BF02654530.10.1007/BF02654530 ↗
22. W.F. Jandeska and J.E. Morral: Metall. Trans., 1972, vol. 3(11), pp. 2933–37. https://doi.org/10.1007/BF02652863.10.1007/BF02652863 ↗
23. X.L. He, M. Djahazi, J.J. Jonas, and J. Jackman: Acta Metall. Mater., 1991, vol. 39(10), pp. 2295–308. https://doi.org/10.1016/0956-7151(91)90012-P.10.1016/0956-7151(91)90012-P ↗
24. L.J. Cuddy and J.C. Raley: Metall. Mater. Trans. A., 1983, vol. 14A, pp. 1989–95. https://doi.org/10.1007/BF02662366.10.1007/BF02662366 ↗
25. H. Mohrbacher and T. Senuma: Metals., 2020, vol. 10(7), art no. 853. https://doi.org/10.3390/met10070853.10.3390/met10070853 ↗
26. Y. Li, D. Ponge, P.P. Choi, and D. Raabe: Scripta Mater., 2015, vol. 96, pp. 13–16. https://doi.org/10.1016/j.scriptamat.2014.09.031.10.1016/j.scriptamat.2014.09.031 ↗
27. J. Webel, A. Herges, D. Britz, E. Detemple, V. Flaxa, H. Mohrbacher, and F. Mücklic: Metals., 2020, vol. 10(2), art no. 243. https://doi.org/10.3390/met10020243.10.3390/met10020243 ↗
28. N. Maruyama, R. Uemori, and M. Sugiyama: Mater. Sci. Eng. A., 1998, vol. 250(1), pp. 2–7. https://doi.org/10.1016/S0921-5093(98)00528-0.10.1016/S0921-5093(98)00528-0 ↗
29. X. Azpeitia, N. Isasti, P. Uranga, J.M. Rodriguez Ibabe, D.G. Stalheim and M. Rebellato: Procs. 2nd International Symposium on the Recent Developments in Plate Steels, AIST, Orlando, FL, 3–6 June, 2018, pp. 83–91.
30. W.J. Liu and M.G. Akben: Can. Metall. Q., 1987, vol. 26(2), pp. 145–53. https://doi.org/10.1179/cmq.1987.26.2.145.10.1179/cmq.1987.26.2.145 ↗