journal article·2022-04

Strength of 444 Stainless Steel Single-Lap Joints Brazed with Ni-Based Metallic Glass Foils for Corrosive Environments

David J. Kemmenoe, Eric A. Theisen, Shefford P. Baker

Publisher page

Abstract

The tensile strengths, σSLJ, of 444 stainless steel single-lap joints (SLJs) brazed with two corrosion-resistant Ni-based braze filler metals (BFMs) were investigated and compared with results from joints made from 316L stainless steel using identical BFMs and processes. In previous work, we proposed that σSLJ could be understood in terms of SLJ geometry (primarily the ratio of overlap length o to plate thickness t—which determines the stress state), base metal properties (which determine stress state evolution with load), and braze microstructure (which determines local failure stress). The geometry and braze microstructure were varied in the prior work. The present study shows the effect of the base metal. 444 has higher yield stress, lower ultimate strength, and less strain hardening than 316L, and also experiences significant grain growth above 1100 °C. Although the braze microstructures of SLJs made using 444 are very similar to those of their 316L counterparts, not only σSLJ, but also variations of both σSLJ and failure mode with o/t are very different. Differences are not simply due to ultimate strength as is commonly assumed, but to how plasticity controls joint rotation and thus stress state during loading, as well as through-thickness grain boundaries acting as failure sites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Mechanical Behavior of Composites · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. D.J. Kemmenoe, E.A. Theisen, and S.P. Baker: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 3317–41.10.1007/s11661-021-06299-1 ↗
2. R.K. Shah: Heat Transf. Eng., 2006, vol. 27, pp. 3–22.10.1080/01457630600559462 ↗
3. A. Rabinkin, E. Wenski, and A. Ribaudo: Weld. J., 1998, vol. 77, pp. 66S-75S.
4. T. Hartmann and M. Marsilius: In LÖT 11th Int. Conf. of Brazing, High Temperature Brazing, and Diffusion Bonding, (DVS 325: Aachen Germany, 2016), pp. 239–44.
5. T. Hartmann and D. Nuetzel: In LÖT 9th Int. Conf. of Brazing, High Temperature Brazing, and Diffusion Bonding, (DVS 263: Aachen Germany, 2010), pp. 42–47.
6. Y. Miyazawa, M. Ishihara, K. Ota, and Y. Bizen: In Int. Brazing and Soldering Conf., (AWS: Long Beach CA, 2015).
7. T. Grostad, L. Kjellen, and M. Stroiczek: In LÖT 12th Int. Conf. of Brazing, High Temperature Brazing, and Diffusion Bonding, (DVS 353: Aachen Germany, 2019), pp 324–35.
8. H. Li, X. Zhang, O. Mars, X. Zhao, Q. Lu, and Z. Chen: Weld. World., 2019, vol. 63, pp. 263–75.10.1007/s40194-018-00687-9 ↗
9. D.Y. Park, S.K. Lee, and Y.J. Oh: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 4684–99.10.1007/s11661-018-4811-0 ↗
10. N.R. Philips, C.G. Levi, and A.G. Evans: Metall. Mater. Trans. A., 2008, vol. 39A, pp. 142–49.10.1007/s11661-007-9382-4 ↗
11. J.P. James, F. Bocher, and J.R. Scully: Corrosion., 2009, vol. 65, pp. 511–26.10.5006/1.3319155 ↗
12. AWS C3.2 Standard Method for Evaluating the Strength of Brazed Joints, American Welding Society, Miami FL, 2019, pp. 1–17.
13. 316/316L Stainless Steel Product Bulletin, AK Steel, West Chester, OH, 2016.
14. 444 Stainless Steel Product Bulletin, AK Steel, West Chester, OH, 2018.
15. K.A. Cashell and N.R. Baddoo: Thin-Walled Struct., 2014, vol. 83, pp. 169–81.10.1016/j.tws.2014.03.014 ↗
16. M. Marsilius and T. Hartmann: In LÖT 11th Int. Conf. of Brazing, High Temperature Brazing, and Diffusion Bonding, (DVS 325: Aachen Germany, 2016), pp. 227–32.
17. C.C. Silva, J.P. Farias, H.C. Miranda, R.F. Guimaraes, J.W.A. Menezes, and M.A.M. Neto: Mater. Charact., 2008, vol. 59, pp. 528–33.10.1016/j.matchar.2007.03.011 ↗
18. M. Goland and E. Reissner: J. Appl. Mech., 1944, vol. 11, pp. A17–A27.10.1115/1.4009336 ↗
19. B. Riggs, A. Benatar, B.T. Alexandrov, and R. Xu: Weld. J., 2017, vol. 96, pp. 421S-428S.
20. Y. Flom and L. Wang: Weld. J., 2004, 32S–38S.
21. J.P.M. Goncalves, M.F.S.F. de Moura, and P.M.S.F. de Castro: Int. J. Adhes. Adhes., 2002, vol. 22, pp. 357–65.10.1016/S0143-7496(02)00015-5 ↗
22. E. Sancaktar and P.O. Lawry: J. Adhes., 1980, vol. 11, pp. 233–41.10.1080/00218468008078919 ↗
23. N.A. de Bruyne: Iron Age, 1944, pp. 60–63.
24. Brazing Technical Bulletin No. T-5 (Revised), Handy & Harman, New York, NY, 1989.
25. A.S. McLaren and I. MacInnes: Br. J. Appl. Phys., 1958, vol. 9, pp. 72–77.10.1088/0508-3443/9/2/306 ↗
26. G. Fessel, J.G. Broughton, N.A. Fellows, and J.F. Durodola: Int. J. Adhes. Adhes., 2007, vol. 27, pp. 574–83.10.1016/j.ijadhadh.2006.09.016 ↗