Comprehensive Analysis of Microalloying Element V Improving Hydrogen Embrittlement Resistance of 1300MPa Bolt Steel
Source abstract
Abstract
In this study, the effect of vanadium addition (0.14 wt pct) on microstructure and hydrogen embrittlement (HE) susceptibility were investigated in 1300 MPa strength level bolt steel, and hydrogen trapping and diffusion were analyzed by hydrogen permeation and thermal desorption spectroscopy (TDS). The results showed that the addition of 0.14 wt pct V in the bolt steel can significantly improve the HE resistance. The vanadium addition can form a large number of V precipitates. Compared with the V-free bolt steel with the same strength, the vanadium addition steel possessed more significant precipitation strengthening and lower dislocation density, which was the main reason to reduce the HE susceptibility. In addition, the vanadium precipitates can provide a lot of hydrogen traps and refine the grains, resulting in the uniform distribution of hydrogen and the reduction of hydrogen accumulated at local grain boundaries, which was helpful to inhibit the hydrogen induced cracking (HIC).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. A. Kuduzović, M.C. Poletti, C. Sommitsch, M. Domankova, S. Mitsche, and R. Kienreich: Mater. Sci. Eng. A., 2014, vol. 590, pp. 66–73.10.1016/j.msea.2013.10.019 ↗
2. J.O. Ham, Y.H. Jang, G.P. Lee, B.G. Kim, K.H. Rhee, and C.K. Cho: Mater. Sci. Eng. A., 2013, vol. 581, pp. 83–9.10.1016/j.msea.2013.06.012 ↗
3. Y.X. Zou, B.Z. Wang, Y.Z. Jiang, M.W. Huang, J. Yi, and J.Y. Yi: Procedia Comput. Sci., 2019, vol. 154, pp. 124–29.10.1016/j.procs.2019.06.019 ↗
4. A. Acri, S. Beretta, F. Bolzoni, C. Colombo, and L.M. Vergani: Eng. Fail. Anal., 2020, vol. 109, p. 104330.10.1016/j.engfailanal.2019.104330 ↗
5. B. Zhang, S. Li, and J. He: Metall. Mater. Trans. A., 2021, vol. 52, pp. 2314–30.10.1007/s11661-021-06223-7 ↗
6. H.J. Kim, S.H. Jeon, W.S. Yang, B.G. Yoo, Y.D. Chung, H.Y. Ha, and H.Y. Chung: J. Alloys. Compd., 2018, vol. 735, pp. 2067–80.10.1016/j.jallcom.2017.12.004 ↗
7. S. Zhang, Y. Huang, B. Sun, Q. Liao, H. Lu, B. Jian, H. Mohrbacher, W. Zhang, A. Guo, and Y. Zhang: Mater. Sci. Eng. A., 2015, vol. 626, pp. 136–43.10.1016/j.msea.2014.12.051 ↗
8. J. Takahashi, K. Kawakami, Y. Kobayashi, and T. Tarui: Scripta Mater., 2010, vol. 63, pp. 261–64.10.1016/j.scriptamat.2010.03.012 ↗
9. F.G. Wei and K. Tsuzaki: Metall. Mater. Trans. A., 2006, vol. 37, pp. 331–53.10.1007/s11661-006-0004-3 ↗
10. J. Takahashi, K. Kawakami, H. Otsuka, and H. Fujii: Ultramicroscopy., 2009, vol. 109, pp. 568–73.10.1016/j.ultramic.2008.11.012 ↗
11. C.L. Zhang, Y.Z. Liu, C. Jiang, and J.F. Xiao: J. Iron Steel Res Int., 2011, vol. 18, pp. 49–53.10.1016/S1006-706X(11)60077-0 ↗
12. A.M. Brass, F. Guillon, and S. Vivet: Metall. Mater. Trans. A., 2004, vol. 35, pp. 1449–64.10.1007/s11661-004-0253-y ↗
13. B.A. Szost, R.H. Vegter, and P.E.J. Rivera-Díaz-del-Castillo: Mater. Des., 2013, vol. 43, pp. 499–506.10.1016/j.matdes.2012.07.030 ↗
14. J. Takahashi, K. Kawakami, and T. Tarui: Scripta Mater., 2012, vol. 67, pp. 213–6.10.1016/j.scriptamat.2012.04.022 ↗
15. F. Wei, T. Hara, and K. Tsuzaki: Metall. Mater. Trans. B., 2004, vol. 35, pp. 587–97.10.1007/s11663-004-0057-x ↗
16. B. Szost, R.H. Vegter, and P. Rivera-Diaz-del-Castillo: Metall. Mater. Trans. A., 2013, vol. 44(10), pp. 4542–50.10.1007/s11661-013-1795-7 ↗
17. B. Malard, B. Remy, C. Scott, A. Deschamps, J. Chêne, T. Dieudonné, and M.H. Mathon: Mater. Sci. Eng. A., 2012, vol. 536, pp. 110–6.10.1016/j.msea.2011.12.080 ↗
18. H. Gwon, S. Shin, J. Jeon, T. Song, S.K. Kim, and B.D. Cooman: Metals Mater. Int., 2018, vol. 89(11), pp. 3708–25.
19. J. Lee, T. Lee, Y. Kwon, D.J. Mun, J.Y. Yoo, and C.S. Lee: Met. Mater. Int., 2016, vol. 22, pp. 364–72.10.1007/s12540-016-5631-7 ↗
20. L.F. Li, B. Song, J. Cheng, Z.B. Yang, and Z.Y. Cai: Int. J. Hydrogen Energy., 2018, vol. 43, pp. 17353–63.10.1016/j.ijhydene.2018.07.110 ↗
21. F. Dong, J. Venezuela, H. Li, Z. Shi, Q.J. Zhou, L.S. Chen, J. Chen, L.X. Du, and A. Atrens: Corrosion Sci., 2021, vol. 185, p. 109440.10.1016/j.corsci.2021.109440 ↗
22. A. Turk, D.S. Martín, P.E.J. Rivera-Díaz-del-Castillo, and E.I. Galindo-Nava: Scr. Mater., 2018, vol. 152, pp. 112–6.10.1016/j.scriptamat.2018.04.013 ↗
23. H. Asahi, D. Hirakami, and S. Yamasaki: ISIJ INT., 2003, vol. 43, pp. 527–33.10.2355/isijinternational.43.527 ↗
24. X.B. Cheng, X.Y. Cheng, C.W. Jiang, X.Y. Zhang, and Q.F. Wen: Mater. Lett., 2018, vol. 213, pp. 118–21.10.1016/j.matlet.2017.11.029 ↗
25. C. Park, N. Kang, and S. Liu: Corros. Sci., 2017, vol. 128, pp. 33–41.10.1016/j.corsci.2017.08.032 ↗
26. K. Takasawa, R. Ikeda, N. Ishikawa, and R. Ishigaki: Int. J. Hydrogen Energy., 2012, vol. 37, pp. 2669–75.10.1016/j.ijhydene.2011.10.099 ↗
27. A. Shibata, T. Matsuoka and N. Tsuji, (2013): pp. 583–9.10.1002/9781118792148.ch71 ↗
28. M. Koyama, H.Y. Wang, V.K. Verma, K. Tsuzaki, and E. Akiyama: Metall. Mater. Trans. A., 2020, vol. 51, pp. 5612–6.10.1007/s11661-020-05966-z ↗
29. M. Liu, C.H. Wang, Y. Dai, X. Li, G.H. Cao, A.M. Russell, Y.H. Liu, X.M. Dong, and Z.H. Zhang: Mater. Sci. Eng. A., 2017, vol. 688, p. 387.
30. Y.J. Momotani, A. Shibata, T. Yonemura, Y. Bai, and N. Tsuji: Scripta Mater., 2020, vol. 178, pp. 318–23.10.1016/j.scriptamat.2019.11.051 ↗
31. E.I. Galindo-Nava, B.I.Y. Basha, and P.E.J. Rivera-Díaz-del-Castillo: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1433–47.10.1016/j.jmst.2017.09.011 ↗
32. W.H. Hall: Proc. Phys. Soc. Sect. A., 1949, vol. 62, pp. 741–3.10.1088/0370-1298/62/11/110 ↗
33. M. Devanathan and Z. Stachurski: J. Electrochem. Soc., 1964, vol. 111, p. 619.10.1149/1.2426195 ↗
34. Y.B. Hu, C.F. Dong, H. Luo, K. Xiao, P. Zhong, and X.G. Li: Metall. Mater. Trans. A., 2017, vol. 48, pp. 4046–57.10.1007/s11661-017-4159-x ↗
35. Y.D. Han, R.Z. Wang, H. Wang, and L.Y. Xu: Int. J. Hydrogen Energy., 2019, vol. 44, pp. 22380–93.10.1016/j.ijhydene.2019.06.054 ↗
36. A.J. Haq, K. Muzaka, D.P. Dunne, A. Calka, and E.V. Pereloma: Int. J. Hydrogen Energy., 2013, vol. 38, pp. 2544–56.10.1016/j.ijhydene.2012.11.127 ↗
37. Y. Liu, M.Q. Wang, and G.Q. Liu: Mater. Sci. Eng. A., 2014, vol. 594, pp. 40–7.10.1016/j.msea.2013.11.058 ↗
38. Y.W. Sun, J.Z. Chen, and J. Liu: Mater. Sci. Eng. A., 2015, vol. 625, pp. 89–97.10.1016/j.msea.2014.12.013 ↗
39. W.Y. Choo and J.Y. Lee: Metall. Trans. A., 1982, vol. 13, pp. 135–40.10.1007/BF02642424 ↗
40. S.J. Li, Z.G. Zhang, E. Akiyama, K. Tsuzaki, and B.P. Zhang: Corros. Sci., 2010, vol. 52, pp. 1660–7.10.1016/j.corsci.2010.02.005 ↗
41. Y. Liu, M.Q. Wang, and G.Q. Liu: Int. J. Hydrogen Energy., 2013, vol. 38, pp. 14364–8.10.1016/j.ijhydene.2013.08.121 ↗
42. Q. Wang, Y. Sun, S.J. Gu, Z.N. He, Q.F. Wang, and F.C. Zhang: Mater. Sci. Eng. A., 2018, vol. 724, pp. 131–41.10.1016/j.msea.2018.03.063 ↗
43. I.J. Park, K.H. Jeong, J.G. Jung, C.S. Lee, and Y.K. Lee: Int. J. Hydrogen Energy., 2012, vol. 37, pp. 9925–32.10.1016/j.ijhydene.2012.03.100 ↗
44. K. P. Balan, In Metallurgical Failure Analysis, ed. Kannadi Palankeezhe Balan (Elsevier: 2018), pp 179–202.10.1016/B978-0-12-814336-0.00010-X ↗
45. J. Lee, T. Lee, Y. Kwon, D.J. Mun, J.Y. Yoo, and C.S. Lee: Corros. Rev., 2015, vol. 33, pp. 433–41.10.1515/corrrev-2015-0052 ↗
46. T. Depover and K. Verbeken: Mater. Sci. Eng. A., 2016, vol. 675, pp. 299–313.10.1016/j.msea.2016.08.053 ↗
47. J. Takahashi, K. Kawakami, and Y. Kobayashi: Acta Mater., 2018, vol. 153, pp. 193–204.10.1016/j.actamat.2018.05.003 ↗
48. A. Drexler, T. Depover, S. Leitner, K. Verbeken, and W. Ecker: J. Alloys Compds., 2020, vol. 826, p. 154057.10.1016/j.jallcom.2020.154057 ↗
49. Y.S. Ding, L.W. Tsay, M.F. Chiang, and C. Chen: J. Nucl. Mater., 2009, vol. 385, pp. 538–44.10.1016/j.jnucmat.2008.12.048 ↗
50. Y. Komatsuzaki, H. Joo, and K. Yamada: Eng. Fract. Mech., 2008, vol. 75, pp. 551–9.10.1016/j.engfracmech.2007.02.009 ↗
51. R.D.K. Misra, H. Nathani, J.E. Hartmann, and F. Siciliano: Mater. Sci. Eng. A., 2005, vol. 394, pp. 339–52.10.1016/j.msea.2004.11.041 ↗
52. A. Ning, Investigation on Nanoscale Precipitates in Hot-Work Die Steel and Comprehensive Strengthening Mechanism of Steel, PhD Thesis, University of Science and Technology Beijing, 2015 (In Chinese).
53. L.Y. Lan, C. Qiu, D. Zhao, and X. Gao: Hanjie Xuebao., 2012, vol. 33, pp. 41–4.
54. B. Liao and F.R. Xiao: Cailiao Rechuli Xuebao., 2009, vol. 30, pp. 57–62.
55. X.P. Mao, X.D. Huo, X.J. Sun, and Y.Z. Chai: J. Mater. Process. Technol., 2010, vol. 210, pp. 1660–6.10.1016/j.jmatprotec.2010.05.018 ↗
56. Y.W. Kim, S.W. Song, S.J. Seo, S.G. Hong, and C.S. Lee: Mater. Sci. Eng. A., 2013, vol. 565, pp. 430–8.10.1016/j.msea.2012.12.055 ↗
57. H. Halfa: J. Minerals Mater. Charact. Eng., 2014, vol. 02, pp. 428–69.
58. H.B. Wu, B. Ju, D. Tang, R.R. Hu, A.M. Guo, Q. Kang, and D. Wang: Mater. Sci. Eng. A., 2015, vol. 622, pp. 61–6.10.1016/j.msea.2014.11.005 ↗
59. M.Q. Wang, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2007, vol. 49, pp. 4081–97.10.1016/j.corsci.2007.03.038 ↗
60. M.B. Djukic, V.S. Zeravcic, G.M. Bakic, A. Sedmak, and B. Rajicic: Eng. Fail. Anal., 2015, vol. 58, pp. 485–98.10.1016/j.engfailanal.2015.05.017 ↗
61. S.K. Bonagani, B. Vishwanadh, S. Tenneti, N.N. Kumar, and V. Kain: Int. J. Pressure Vessels Pip., 2019, vol. 176, p. 103969.10.1016/j.ijpvp.2019.103969 ↗
62. A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Acta Mater., 2012, vol. 60, pp. 5182–9.10.1016/j.actamat.2012.06.040 ↗
63. M.J. Gomes da Silva, J.L. Cardoso, D.S. Carvalho, L.P.M. Santos, L.F.G. Herculano, H.F. Gomes de Abreu, and J.M. Pardal: Int. J. Hydrogen Energy., 2019, vol. 44, pp. 18606–15.10.1016/j.ijhydene.2019.05.074 ↗
64. N. Zan, H. Ding, X.F. Guo, Z.Y. Tang, and W. Bleck: Int. J. Hydrogen Energy., 2015, vol. 40, pp. 10687–96.10.1016/j.ijhydene.2015.06.112 ↗
65. Y.H. Fan, B. Zhang, J.Q. Wang, E.H. Han, and W. Ke: J. Mater. Sci. Technol., 2019, vol. 35, pp. 2213–9.10.1016/j.jmst.2019.03.043 ↗
66. A. Nagao, M. Dadfarnia, B.P. Somerday, P. Sofronis, and R.O. Ritchie: J. Mech. Phys. Solids., 2018, vol. 112, pp. 403–30.10.1016/j.jmps.2017.12.016 ↗
67. C.A. Zapffe and C.E. Sims: Am. Innst. Mining Met. Engrs. Tech. Pub., 1941, vol. 1307, pp. 1–37.