Electrochemical Characterization of a Novel Mg70Al18Zn6Ca4Y2 Low Entropy Alloy in Different Aqueous Environments
Source abstract
Abstract
In the present investigation, design and development of a novel Mg-based multicomponent low entropy alloy (Mg LEA-Mg70Al18Zn6Ca4Y2) was carried out using Disintegrated Melt Deposition (DMD) technique. Various electrochemical techniques such as potentiodynamic polarization test (PDP) and electrochemical impedance spectroscopy (EIS) are used to investigate the electrochemical behaviour of the present Mg-LEA alloy at different molar concentrations in acidic (HCl), neutral (NaCl) and alkaline (NaOH, at different pH levels) solutions. The results show that, this alloy easily gets corroded with the increase of Cl− ion concentration due to the breakdown of the Mg(OH)2 passive layer in both acidic and neutral solutions. However, in the case of alkaline solution, the corrosion resistance of the alloy increases due to the formation of a stable Mg(OH)2 layer along with AlMg2Zn and Al2Y phases, which is more stable than αMg. The ranking of Mg-LEA alloy’s corrosion rate is as HCl> NaCl> NaOH. The impedance measurements have correlated well with polarizations results and the data obtained according to the equivalent circuit provide insights between electrode and electrolyte interface. Through SEM analysis, pitting corrosion was observed in Mg-LEA alloy in acidic and neutral solutions and their chemical compositions were obtained using energy-dispersive X-ray spectroscopy (EDS).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. G. Manivasagam and S. Suwas: Materials Science and Technology, 2014, vol. 30, pp. 515-520.10.1179/1743284713Y.0000000500 ↗
2. M. Esmaily, J.E. Svensson, S. Fajardo, N. Birbilis, G.S. Frankel, S. Virtanen, R. Arrabal, S. Thomas, L.G. Johansson: Progress in Materials Science, 2017, vol.89, pp. 92–193.10.1016/j.pmatsci.2017.04.011 ↗
3. W. Zhang, R. Tang, Z.B. Yang, C.H. Liud, H. Change, J.J. Yanga, J.L. Liaoa, Y.Y. Yanga, N. Liua: Surface and Coatings Technology, 2018, vol. 347, pp. 13-19.10.1016/j.surfcoat.2018.04.037 ↗
4. K. S. Tun, A. Kumar, and M. Gupta: Frontiers in Materials, 2019, vol. 6, pp. 1-6.10.3389/fmats.2019.00215 ↗
5. K.S. Tun, A. Nahata, S. Vincent, M. Gupta: Mater. Today, 2020, vol. 28, pp. 1044–1047.
6. Mustafa Kemal Kulekci: The International Journal of Advanced Manufacturing Technology, 2008, vol. 39, pp. 851–865.10.1007/s00170-007-1279-2 ↗
7. R. Ambat, N.N. Aung, W. Zhou: Journal of Applied Electrochemistry, 2000, vol. 30, pp. 865-874.10.1023/A:1004011916609 ↗
8. Ambat R, Aung NN, Zhou W: Corrosion Science, 2000, vol. 42, pp. 1433-1455.10.1016/S0010-938X(99)00143-2 ↗
9. Jian Chen, Jianqiu Wang, Enhou Han, Junhua Dong, Wei Ke: Electrochimica Acta, 2007, vol. 52, pp. 3299-3309.10.1016/j.electacta.2006.10.007 ↗
10. I.B.Sing, M.Sing, S.Das: Journal of Magnesium and Alloys: 2015, vol. 3, pp. 1-7.10.1016/j.jma.2014.12.010 ↗
11. F. Hehman, F.H. Fross, W. Young: Journal of Mechanical Engineering and technology, 1987, vol. 39, pp. 14-21.
12. GM Abady, NH Hilal, M El-Rabiee, WA Badawy: Electrochimica Acta, 2010, vol. 55 pp. 6651-6658.10.1016/j.electacta.2010.06.007 ↗
13. WA Badawy, NH Hilal, M El-Rabiee, H Nady: Electrochimica Acta, 2010, vol.55, pp. 1880-1887.10.1016/j.electacta.2009.10.083 ↗
14. YQ Wang, MZ Li, C Li, XY Li, LQ Fan, T. Jia: Materials and corrosion, 2012, vol.63, pp. 497-504.10.1002/maco.201005957 ↗
15. Woo SK, Blawert C, Yasakau KA, Yi S, Scharnagl N, Suh BC, Kim YM, You BS, Yim CD. Effects of combined addition of Ca and Y on the corrosion behaviours of die-cast AZ91D magnesium alloy. Corrosion Science. 2020 Apr 15;166:10845110.1016/j.corsci.2020.108451 ↗
16. M. Liu, P. Schmutz, P.J. Uggowitzer, G. Song, Andrej Atrens: Corrosion Science. 2010, vol. 52, pp. 3687–3701.10.1016/j.corsci.2010.07.019 ↗
17. T.J. Luo, Y.S. Yang, Y.J. Li, X.G. Dong: Electrochimica Acta, 2009, vol. 54, pp. 6433–6437.10.1016/j.electacta.2009.06.023 ↗
18. T.J. Luo, Y.S. Yang: Materials and Design, 2011, vol. 32, pp. 5043–5048.10.1016/j.matdes.2011.05.038 ↗
19. S. Jayalakshmi and M. Gupta, Metallic Amorphous Alloy Reinforcements in Light Metal Matrices, Springer, Cham, 2015, pp. 18-20.10.1007/978-3-319-15016-1 ↗
20. Chunhong Zhang, Xiaomei Huang, Milin Zhang, Lili Gao, Reizhi Wu: Materials Letters, 2008, vol.62, pp. 2177–2180.10.1016/j.matlet.2007.11.044 ↗
21. H. C. K. Ison: Handbook on Corrosion Testing and Evaluation. British Corrosion Journal, 1971, vol. 7, pp. 171.10.1179/000705972798323206 ↗
22. Tian Y, Yang L-J, Li Y-F, Wei Y-H, Hou L-F, Li Y-G, Murakami R-I: Transactions of Nonferrous Metals Society of China, 2011, vol.21, pp. 912-920.10.1016/S1003-6326(11)60801-7 ↗
23. Fakiha El-Taib Heakal, Amany Mohammed Fekry, Mohammed Ziad Fatayerji: Journal of Applied Electrochemistry, 2009, vol. 39, pp. 583–591.10.1007/s10800-008-9696-y ↗
24. F. El-TaibHeakal, A.M. Fekry, M.Z. Fatayerji (2009) Electrochim. Acta vol. 54, pp. 1545–1557.10.1016/j.electacta.2008.09.055 ↗
25. G.Song, A.Atrens, D.StJohn, X.Wu, J.Nairn: Corrosion Science, 1997, vol. 39, pp. 1981-2024.10.1016/S0010-938X(97)00090-5 ↗
26. N. Pebere, T. Picaud, M. Durprat, F Dabosi: Corrosion Science, 1989, vol.29, pp. 1073-1086.10.1016/0010-938X(89)90045-0 ↗
27. G. Ruhi, O.P. Modi, I.B. Singh: Surface Coating Technology, 2009, vol. 204, pp. 359-365.10.1016/j.surfcoat.2009.07.044 ↗
28. Y. Chen, T. Hong, M. Gopal, W.P. Jepson: Corros. Sci., 2000, vol. 42, pp. 979–990.10.1016/S0010-938X(99)00127-4 ↗
29. X Zhang, Y-J Li, K Zhang, C-S Wang, H-W Li, M-L Ma, B-D Zhang: Transactions of Nonferrous Metals Society of China, 2013, vol. 23, pp. 1226−1236.10.1016/S1003-6326(13)62587-X ↗
30. M.H. Grosjean, M. Zidoune, L. Roue, J.Y. Huot: International Journal of Hydrogen Energy, 2006, vol. 31, pp. 109 – 119.10.1016/j.ijhydene.2005.01.001 ↗
31. I.A. Taub, W. Roberts, S. Lagambina, K. Kustin: The Journal of Physical Chemistry A, 2002, vol. 106, pp. 8070-8078.10.1021/jp0143847 ↗
32. J.K. Lin, C.L. Hsia and J.Y. Uan: Scripta Materialia, 2007, vol. 56, pp. 927–930.10.1016/j.scriptamat.2007.02.020 ↗
33. Nordlien JH, Nisancioglu K, Ono S, Masuko N: Journal of the Electrochemical Society, 1996, vol. 143, pp. 2564-2572.10.1149/1.1837048 ↗