journal article·2021-03

Retrogression and Reaging of AA7075 and AA6013 Aluminum Alloys

Katherine E. Rader, Jon T. Carter, Louis G. Hector, Eric M. Taleff

Publisher page

Abstract

Retrogression and reaging (RRA) is of interest to the automotive industry for manufacturing components of high-strength aluminum alloys. RRA heat treatments are investigated for AA7075-T6 and AA6013-T6 materials. Retrogression is demonstrated to be a thermally activated process reasonably characterized with a single activation energy. Activation energies for retrogression are measured as 97 ± 7 and 160 ± 30 kJ/mol for AA7075-T6 and AA6013-T6, respectively. Critical retrogression times, tR* and t R max , are defined and measured across a range of retrogression temperatures. These data are used with the concept of reduced time to predict combinations of temperature and time that produce successful retrogression heat treatments. Recommended retrogression heat treatments are 200 °C for 3 to 12 minutes for AA7075-T6 and 240 °C for 7 minutes for AA6013-T6. Data from reaging heat treatments confirm a significant RRA response in AA6013. Recommended reaging heat treatments are 120 °C for 24 hours for retrogressed AA7075 and 190 °C for 1 hour for retrogressed AA6013. A reaging heat treatment that simulates the automotive paint-bake cycle, 185 °C for 25 minutes, is almost as effective as the recommended reaging heat treatment for AA6013 but is significantly less effective than the recommended reaging heat treatment for AA7075.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. B.M. Cina: US Patent 3856584, 1974.
2. B. Cina and B. Ranish: Aluminum Industrial Products, 1974, pp. 1–29.
3. W. Wallace, J. C. Beddoes, and M. C. DeMalherbe: Canadian Aeronautics and Space Journal, 1978, vol. 27, no. 3, pp. 222-232.
4. K. Rajan, W. Wallace, and J. C. Beddoes: J. Mater. Sci., 1982, vol. 17, pp. 2817-2824.10.1007/BF00644656 ↗
5. N. C. Danh, K. Rajan, and W. Wallace: Metall. Trans. A, 1983, vol. 14A, no. 9, pp. 1843-1850.10.1007/BF02645554 ↗
6. J. K. Park: Mater. Sci. Eng. A, 1988, vol. 103A, no. 2, pp. 223-231.10.1016/0025-5416(88)90512-5 ↗
7. T. A. Ivanoff, J. T. Carter, L. G. Hector, Jr., and E. M. Taleff: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1545-1561.10.1007/s11661-018-5084-3 ↗
8. J. K. Park and A. J. Ardell: Metall. Trans. A, 1984, vol. 15A, pp. 1531-1543.10.1007/BF02657792 ↗
9. J. M. Popazien: Mater. Sci. Eng., 1986, vol. 79, pp. 97-104.10.1016/0025-5416(86)90391-5 ↗
10. M. Talianker and B. Cina: Metall. Trans. A, 1989, vol. 20, no. 10, pp. 2087-2092.10.1007/BF02650294 ↗
11. J. P. Immarigeon, R. T. Holt, A. K. Koul, L. Zhao, W. Wallace, and J. C. Beddos: Mater. Charact., 1995, vol. 35, pp. 41-67.10.1016/1044-5803(95)00066-6 ↗
12. M. B. Kannan, P. B. Srinivasan, and V. S. Paja: Stress Corrosion Cracking, Woodhead Publishing, Cambridge, UK, 2011, 307-340.10.1533/9780857093769.3.307 ↗
13. R. N. Lumley, A. J. Morton, R. G. O’Donnell, and I. J. Polmear: Heat Treat. Prog., 2005, vol. 5, no. 2, pp. 23-29.
14. The Aluminum Automotive Manual (European Aluminum Association, Brussels, Belgium, 2002). https://www.european-aluminium.eu/resource-hub/aluminium-automotive-manual/. Accessed 5 Feb 2020
15. J.C. Benedyk: US Patent 5911844, 1999.
16. J. C. Benedyk and S. Mostovoy: Light Met. Age, 1997, vol. 55, no. 1-2, pp. 28-33.
17. R.M. Kelly: US Patent 20150020927A1, 2015.
18. P.E. Krajewski: SAE Tech. Pap. Ser., no. 2006-01-0984, 2006.10.1055/s-2006-949337 ↗
19. R. S. Long, E. Boettcher, and D. Crawford: J. Mater., 2017, vol. 69, no. 12, pp. 2635-2639.
20. N.R. Harrison and S.G. Luckey: SAE Tech. Pap. Ser., no. 2014-01-0981, 2014.
21. J. Mendiguren, E. Saenz de Arganodona, and L. Galdos: IOP Conf. Ser.: Mater. Sci. Eng., vol. 159 no. 012026, 2016.10.1088/1757-899X/159/1/012026 ↗
22. A. Keci, N.R. Harrison, and S.G. Luckey: SAE Tech. Pap. Ser., no. 2014-01-0984, 2014.
23. H. Wang, Y. B. Luop, P. Friedman, M. H. Chen, & L. Gao: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, no. 7, pp. 1-7.10.1016/S1003-6326(11)61131-X ↗
24. W. Xiao, B. Wang, and K. Zheng: Int. J. Adv. Manuf. Tech., 2017, vol. 92, pp. 3299-3309.10.1007/s00170-017-0419-6 ↗
25. T. Moons, P. Ratchev, P. de Smet, B. Verlinden, and P. Van Houtte: Scr. Mater., 1996, vol. 35, no. 8, pp. 939–45.10.1016/1359-6462(96)00244-8 ↗
26. E.M. Taleff, P.J. Nevland, and P.E. Krajewski: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1119-1130.10.1007/s11661-001-0123-9 ↗
27. ASM Handbook Committee: ASM Handbook, Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, Materials Park, OH, 1990, pp. 62–122.
28. Alcoa Inc.: Alcoa Technical Fact Sheet: Alloy 6013 sheet: Maximum strength 6xxx series sheet, Alcoa Inc., Bettendorf, Iowa, 2017
29. K. Rader, J. Carter, L. Hector, Jr., and E. Taleff: TMS 2019: Light Met. 2019, 2019, pp. 159-64.10.1007/978-3-030-05864-7_22 ↗
30. L. Zhuang, R. de Haan, J. Bottema, C. T. W. Lahaye, and P. De Smet: Mater. Sci. Forum, 2000, vol. 331-337, pp. 1309-1314.10.4028/www.scientific.net/MSF.331-337.1309 ↗
31. D. C. Balderach, J. A. Hamilton, E. Leung, M. C. Tejeda, J. Qiao, and E. M. Taleff: Mater. Sci. Eng., 2002, vol. A339, pp. 194-204.10.1016/S0921-5093(02)00158-2 ↗
32. Alcoa Inc.: Alcoa Technical Fact Sheet: Alloy 7075 Plate and Sheet, Alcoa Inc., Bettendorf, Iowa. 2017
33. MIL-H-6088G Military Specification: Heat Treatment of Aluminum Alloys, 1991, http://everyspec.com/MIL-SPECS/MIL-SPECS-MIL-H/MIL-H-6088_NOTICE-1_17474/. Accessed 4 May 2020.
34. S. Arrhenius: Z. Phys. Chem. (Leipzig), 1889, vol. 4, no. 1, pp. 96-116.10.1515/zpch-1889-0408 ↗
35. K. Rader, T. Ivanoff, H. Shin, J. Carter, L. Hector, Jr., and E. Taleff: TMS 2018: Light Met. 2018, 2018, pp. 241-46.10.1007/978-3-319-72284-9_33 ↗
36. ANSI B74.10: United Abrasives Manufacturers Association, Cleveland, OH, 2015.
37. UAMA B74.10-2015: United Abrasives Manufacturers Association, Cleveland, OH, 2015.
38. ASTM E92-17: ASTM International, West Conshohocken, PA, 2017.
39. G.E. Totten and D.S. MacKenzie (eds.): ASM Handbook, Volume 4E: Heat Treating of Nonferrious Alloys, ASM International, Materials Park, OH, 2016, pp. 289–95.
40. H. Kuhn and D. Medlin (eds.): ASM Handbook, Volume 8: Mechanical Testing and Evaluation. ASM International, Materials Park, OH, 2000, pp. 260–77.10.31399/asm.hb.v08.9781627081764 ↗
41. S. Sato and T. Endo: J. Jpn. Inst. Light Met. (Tokyo), 1986, vol. 36, no. 1, pp. 29–35.10.2464/jilm.36.29 ↗
42. ASTM E18-20: ASTM International, West Conshohocken, PA, 2020.
43. M. J. Sarink: Int. Mater. Rev., 2004, vol. 49, no. 3-4, pp. 191-226.10.1179/095066004225010532 ↗
44. R. Braun: Mater. Charact., 2006, vol. 56, pp. 85-95.10.1016/j.matchar.2005.03.006 ↗
45. C. Barbosa, J. M. A. Rebello, O. Acselrad, J. Dille, and J.-L. Delplancke: Z. Metall., 2002, vol. 93, no. 3, pp. 208-211.10.3139/146.020208 ↗
46. M. Tanaka and T. Warner: Rev. Metall., 2003, vol. 100, no. 5, pp. 463-469.10.1051/metal:2003216 ↗
47. The MathWorks, Inc.: MATLAB [Software], Version R2016b, 2016, https://www.mathworks.com/products/matlab
48. J. Pahk, Summary of rules on propagation of error, 2008, https://sites.fas.harvard.edu/~scphys/nsta/sc9.htm. Accessed 17 April 2018
49. P. Barczy and F. Tranta: Scand. J. Metall., 1975, vol. 4, no. 6, pp. 284-288.
50. J. K. Park and A. J. Ardell: Metall. Trans. A, 1983, vol. 14A, pp. 1957-1966.10.1007/BF02662363 ↗