Solid-State Phase Transformations Involving (Nb,Mo)2CrB2 Borides and (Nb,Ti)2CS Carbosulfides at the Grain Boundaries of Superalloy Inconel 718
Source abstract
Abstract
The present paper studied the solid-state phase transformations occurring at the grain boundaries of a conventional cast-and-wrought alloy within the chemical specifications of superalloy Inconel 718. These phase transformations involved the precipitation of (Nb,Mo)2CrB2 borides and (Nb,Ti)2CS carbosulfides, which are usually phases rather associated to solidification phenomena than to solid-state phase precipitation in superalloy Inconel 718. The study started from a material solution-treated above the δ solvus. When this material was heated subsolvus δ from room temperature, (Nb,Mo)2CrB2 borides was found to precipitate at the grain boundaries, in addition to the δ phase. Then, when the material was reheated supersolvus δ after the subsolvus treatment, the complete dissolution of the δ phase and the partial dissolution of the (Nb,Mo)2CrB2 phase released niobium and titanium atoms in the grain boundaries. Both elements have a strong affinity with carbon and sulfur, and this favored the precipitation of secondary (Nb,Ti)C carbides and (Nb,Ti)2CS carbosulfides at grain boundaries. An analysis of the interactions between the segregating species C, B and S evidenced that the precipitation of (Nb,Mo)2CrB2 borides at grain boundaries was very likely made possible by a decreased carbon activity during the subsolvus δ treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. R.E. Schafrik, D.D. Ward, and J.R. Groh: in Superalloys 718, 625, 706 and Various Derivatives, TMS, 2001, pp. 1–11.10.7449/2001/Superalloys_2001_1_11 ↗
2. G.D. Smith and S.J. Patel: in Superalloys 718, 625, 706 and Derivatives, TMS, 2005, pp. 135–54.10.7449/2005/Superalloys_2005_135_154 ↗
3. M.G. Burke and M.K. Miller: in Superalloys 718, 625 and Various Derivatives, TMS, 1991, pp. 337–50.10.7449/1991/Superalloys_1991_337_350 ↗
4. S.T. Wlodek and R.D. Field: in Superalloys 718, 625, 706 and Various Derivatives, TMS, 1994, pp. 659–70.10.7449/1994/Superalloys_1994_659_670 ↗
5. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: in Superalloys 718, 625, 706 and Various Derivatives, TMS, 1997, pp. 367–78.10.7449/1997/Superalloys_1997_367_378 ↗
6. H.E. Collins: in International Symposium on Structural Stability in Superalloys (1968), TMS, 1968, pp. 171–98.
7. 7 I. Kirman: J. Iron Steel Inst., 1969, vol. 207, p. 1612.
8. 8 I. Kirman and D.H. Warrington: Metall. Trans., 1970, vol. 1, pp. 2667–75.10.1007/BF03037800 ↗
9. 9 M. Dehmas, J. Lacaze, A. Niang, and B. Viguier: Adv. Mater. Sci. Eng., 2011, vol. 2011, pp. 1–9.10.1155/2011/940634 ↗
10. A. Mitchell, A.J. Schmalz, C. Schvezov, and S.L. Cockroft: in Superalloys 718, 625, 706 and Various Derivatives, TMS, 1994, pp. 65–78.10.7449/1994/Superalloys_1994_65_78 ↗
11. 11 A. Formenti, A. Eliasson, A. Mitchell, and H. Fredriksson: High Temp. Mater. Process., 2005, vol. 24, pp. 239–58.10.1515/HTMP.2005.24.4.239 ↗
12. 12 R.T. Holt and W. Wallace: Int. Met. Rev., 1976, vol. 21, pp. 1–24.10.1179/imr.1976.21.1.1 ↗
13. M.K. Miller, J.A. Horton, W.D. Cao, and R.L. Kennedy: Le J. Phys. IV, 1996, vol. 06, pp. C5-241-C5-246.10.1051/jp4:1996539 ↗
14. 14 T.M. Pollock and S. Tin: J. Propuls. Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
15. 15 S. Benhadad, N.L. Richards, and M.C. Chaturvedi: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2005–17.10.1007/s11661-002-0033-5 ↗
16. W.D. Cao and R.L. Kennedy: in Superalloys 1996, TMS, 1996, pp. 589–97.10.7449/1996/Superalloys_1996_589_597 ↗
17. J.T. Guo and L.Z. Zhou: in Superalloys 1996, TMS, 1996, pp. 451–55.10.7449/1996/Superalloys_1996_451_455 ↗
18. 18 D.W. Yun, S.M. Seo, H.W. Jeong, and Y.S. Yoo: Corros. Sci., 2014, vol. 83, pp. 176–88.10.1016/j.corsci.2014.02.015 ↗
19. 19 W.R. Sun, S.R. Guo, D.Z. Lu, and Z.O. Hu: Mater. Lett., 1997, vol. 31, pp. 195–200.10.1016/S0167-577X(96)00266-2 ↗
20. 20 R. Vincent: Acta Metall., 1985, vol. 33, pp. 1205–16.10.1016/0001-6160(85)90231-7 ↗
21. 21 W. Chen, M.C. Chaturvedi, N.L. Richards, and G. McMahon: Metall. Mater. Trans. A, 1998, vol. 29, pp. 1947–54.10.1007/s11661-998-0020-6 ↗
22. 22 L. Peng, S. Takizawa, K. Ikeda, T. Horiuchi, and S. Miura: Intermetallics, 2019, vol. 110, pp. 2–7.10.1016/j.intermet.2019.03.020 ↗
23. Alloy Wire International: Inconel® 718, https://www.alloywire.fr/products/inconel-718/.
24. 24 E. Nes, N. Ryum, and O. Hunderi: Acta Metall., 1985, vol. 33, pp. 11–22.10.1016/0001-6160(85)90214-7 ↗
25. 25 S. Vernier, J.-M. Franchet, M. Lesne, T. Douillard, J. Silvent, C. Langlois, and N. Bozzolo: Mater. Charact., 2018, vol. 142, pp. 492–503.10.1016/j.matchar.2018.06.015 ↗
26. 26 B. Ter-Ovanessian, C. Berrest, J. Deleume, J.M. Cloué, and E. Andrieu: Defect Diffus. Forum, 2009, vol. 289–292, pp. 161–6.10.4028/www.scientific.net/DDF.289-292.161 ↗
27. 27 G. Love, V.D. Scott, N.M.T. Dennis, and L. Laurenson: Scanning, 1981, vol. 4, pp. 32–9.10.1002/sca.4950040105 ↗
28. 28 F.J. Humphreys: J. Mater. Sci., 2001, vol. 36, pp. 3833–54.10.1023/A:1017973432592 ↗
29. 29 H.J. Beattie: Acta Crystallogr., 1958, vol. 11, pp. 607–9.10.1107/S0365110X58001626 ↗
30. 30 J. Berlin: Imaging Microsc., 2011, vol. 13, pp. 19–21.
31. 31 H. Müllejans and J. Bruley: Le J. Phys. IV, 1993, vol. 3, pp. 2083–92.
32. 32 J.J. Lander, H.E. Kern, and A.L. Beach: J. Appl. Phys., 1952, vol. 23, pp. 1305–9.10.1063/1.1702064 ↗
33. 33 K. Takagi, W. Koike, A. Momozawa, and T. Fujima: Solid State Sci., 2012, vol. 14, pp. 1643–7.10.1016/j.solidstatesciences.2012.05.009 ↗
34. 34 A. Miyoshi and A. Hara: J. Japan Soc. Powder Powder Metall., 1965, vol. 12, pp. 78–84.10.2497/jjspm.12.78 ↗
35. ATI Allvac Company: ATI 718 Alloy—Technical Data Sheet, 2011.
36. 36 F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloys Compd., 2016, vol. 658, pp. 981–95.10.1016/j.jallcom.2015.11.002 ↗
37. 37 W. Kesternich: MRS Proc., 1985, vol. 62, p. 229.10.1557/PROC-62-229 ↗
38. 38 E.P. Whelan and M.S. Grzedzielski: Met. Technol., 1974, vol. 1, pp. 186–90.10.1179/030716974803288040 ↗
39. R.G. Thompson, M.C. Koopman, and B.H. King: in Superalloys 718, 625, 706 and Various Derivatives, 1991, pp. 53–70.10.7449/1991/Superalloys_1991_53_70 ↗
40. 40 T. Alam, P.J. Felfer, M. Chaturvedi, L.T. Stephenson, M.R. Kilburn, and J.M. Cairney: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2183–91.10.1007/s11661-012-1085-9 ↗
41. 41 D. Raabe, M. Herbig, S. Sandlöbes, Y. Li, D. Tytko, M. Kuzmina, D. Ponge, and P.-P. Choi: Curr. Opin. Solid State Mater. Sci., 2014, vol. 18, pp. 253–61.10.1016/j.cossms.2014.06.002 ↗
42. 42 P. Kontis, H.A.M. Yusof, S. Pedrazzini, M. Danaie, K.L. Moore, P.A.J. Bagot, M.P. Moody, C.R.M. Grovenor, and R.C. Reed: Acta Mater., 2016, vol. 103, pp. 688–99.10.1016/j.actamat.2015.10.006 ↗
43. 43 Y.Q. Li and J.Y. Liu: High Temp. Technol., 1990, vol. 8, pp. 278–82.10.1080/02619180.1990.11753493 ↗
44. 44 M. Paju and R. Möller: Scr. Metall., 1984, vol. 18, pp. 813–5.10.1016/0036-9748(84)90400-9 ↗
45. 45 X.L. He, Y.Y. Chu, and J.J. Jonas: Acta Metall., 1989, vol. 37, pp. 2905–16.10.1016/0001-6160(89)90325-8 ↗
46. 46 H. Erhart and H.J. Grabke: Met. Sci., 1981, vol. 15, pp. 401–8.10.1179/030634581790426877 ↗
47. 47 L. Xiao, D.L. Chen, and M.C. Chaturvedi: Mater. Sci. Eng. A, 2006, vol. 428, pp. 1–11.10.1016/j.msea.2005.08.206 ↗
48. 48 P. Kontis, E. Alabort, D. Barba, D.M. Collins, A.J. Wilkinson, and R.C. Reed: Acta Mater., 2017, vol. 124, pp. 489–500.10.1016/j.actamat.2016.11.009 ↗
49. 49 J.M. Walsh and B.H. Rear: Metall. Trans. A, 1975, vol. 6, pp. 950–950.10.1007/BF02672328 ↗
50. 50 H. Guo, M.C. Chaturvedi, and N.L. Richards: Sci. Technol. Weld. Join., 1998, vol. 3, pp. 257–9.10.1179/stw.1998.3.5.257 ↗
51. D. Monceau and C. Boudias: CaRine Crystallography, 1993-2019, http://carine.crystallography.pagesperso-orange.fr/.