journal article·2020-12Open access

Creep Deformation and Dynamic Grain Growth in an Interstitial-Free Steel

Ryann E. Rupp, Philip J. Noell, Eric M. Taleff

Abstract

Dynamic grain growth is demonstrated to be much faster than static grain growth in a body-centered-cubic, interstitial-free steel sheet material at 850 $$\,^\circ {\rm{C}}$$ . Dynamic grain growth occurs during concurrent plastic deformation at elevated temperature, whereas static grain growth occurs during static annealing. Grain growth during steady-state plastic flow in tension at 850 $$\,^\circ {\rm{C}}$$ to a true strain of 0.2 at a true-strain rate of $$10-4$$ $${\rm{s}}-1$$ doubled grain size, while static annealing for the same time produced no increase in grain size. This is described as dynamic normal grain growth (DNGG) because no abnormally large grains were observed. The recrystallized microstructure of the steel demonstrated a log-normal distribution of grain sizes. DNGG produced bimodal grain size distributions that deviate from the theoretical expectation of a simple shift to larger sizes during normal growth. The bimodal distributions contained a remnant of small grains that were not consumed during grain growth. DNGG produced a crystallographic texture that is unique from both the recrystallized material and that produced by lattice rotation alone. DNGG strengthened the $$\{111\} \langle 110 \rangle $$ and $$\{111\} \langle 112 \rangle $$ components of the strong $$\gamma $$ -fiber component in the original recrystallization texture. Lattice rotation from tensile deformation, by contrast, strengthened the $$\alpha $$ -fiber components that intersect the original $$\gamma $$ -fiber.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. G. Krauss, Steels: Processing, Structure, and Performance, ASM International, Materials Park, OH, 21, 226–230 (2005)
2. W.T. Lankford, S. C. Snyder, J. A. Bauscher, Trans. A.S.M., 1950, vol. 42, 1197–1232.
3. R. K. Ray, J. J. Jonas, R. E. Hook, Int. Mater. Rev., 93, 129–172 (1994)10.1179/imr.1994.39.4.129 ↗
4. N. Yoshinaga, N. Sugiura, S. Hiwatashi, K. Ushioda, O. Kada, ISIJ Int., 48, 667–670 (2008)10.2355/isijinternational.48.667 ↗
5. T. Ukena, CAMP-ISIJ, 8, p. 1385 (1995)
6. T. Ukena, CAMP-ISIJ, 8, p. 593 (1995)
7. J. G. Byrne, Recovery, Recrystallization, and Grain Growth, The MacMillian Company, New York (1965)
8. F. J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier, New York (2004)
9. D. Wilkinson, C. Caceres, Acta Metall., 32, 1335–1345 (1984)10.1016/0001-6160(84)90079-8 ↗
10. P. Friedman, A. Ghosh, Metall. Mater. Trans. A, 27, 3827–3839 (1996)10.1007/BF02595632 ↗
11. P. Bate, K. Hyde, S. Court, F. Humphreys, Mater. Sci. Forum, vol. 447-448, 61–66 (2004)10.4028/www.scientific.net/MSF.447-448.61 ↗
12. K. Okayasu, H. Fukutomi, J. Jpn. Inst. Met., 70, 562–567 (2006)10.2320/jinstmet.70.562 ↗
13. K. Okayasu, H. Takekoshi, H. Fukutomi, Mater. Trans., 48, 2002–2007 (2007)10.2320/matertrans.L-MRA2007869 ↗
14. K. Okayasu, S. Takahata, H. Fukutomi, Mater. Sci. Forum, vol. 702–703, 336–339 (2012)
15. Y. Onuki, R. Hongo, K. Okayasu, H. Fukutomi, Acta Mater., 61, 1294–1302 (2013)10.1016/j.actamat.2012.11.007 ↗
16. J. R. Ciulik, E. M. Taleff, Scripta Mater., 61, 895–898 (2009)10.1016/j.scriptamat.2009.07.021 ↗
17. N. A. Pedrazas, T. E. Buchheit, E. A. Holm, E. M. Taleff, Mater. Sci. Eng. A, 610, 76–84 (2013)10.1016/j.msea.2014.05.031 ↗
18. D. L. Worthington, N. A. Pedrazas, E. M. Taleff, Metall. Mater. Trans. A, 44, 5025–5038 (2013)10.1007/s11661-013-1865-x ↗
19. P. J. Noell, D. L. Worthington, E. M. Taleff, Metall. Mater. Trans. A, 46, 5709–5718 (2015)
20. P. J. Noell, E. M. Taleff, Metall. Mater. Trans. A, 47, 5023–5036 (2016)10.1007/s11661-016-3644-y ↗
21. P. J. Noell, D. L. Worthington, E. M. Taleff, Mater. Sci. Eng. A, 692, 24–34 (2017)10.1016/j.msea.2017.03.021 ↗
22. P. J. Noell, E. M. Taleff, Metall. Mater. Trans. A, 50, 4608–4619 (2019)10.1007/s11661-019-05370-2 ↗
23. H.-J. Bunge, Texture Analysis in Materials Science: Mathematical Methods, digital edition, Butterworth & Co., 1982.10.1016/B978-0-408-10642-9.50019-2 ↗
24. U. F. Kocks, C. N. Tomé, H.-R. Wenk, Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties, Cambridge University Press, Cambridge, UK (1998)
25. V. Randle, Microtexture Determination and Its Applications, The Institute of Materials, London (1992)
26. ASTM International: Standard Designation E 18–17 $$\epsilon 1$$, ASTM International, West Conshohocken, PA, 2017.
27. R.E. Rupp, Dynamic Normal Grain Growth in BCC Interstitial-Free Steel During Hot Deformation, Ph.D. Thesis, The University of Texas at Austin, August 2018.
28. ASTM International: Standard Designation E 112–13, ASTM International, West Conshohocken, PA, July 2013.
29. Wolfram Research, Inc.: Mathematica, Version 11.2, 2017.
30. N.A. Pedrazas, Dynamic Abnormal Grain Growth in Selected Refractory Metals, Ph.D. Thesis, The University of Texas at Austin, August 2013.
31. F. Bachmann, R. Hielscher, H. Schaeben, Solid State Phenom., 160, 63–68 (2010)10.4028/www.scientific.net/SSP.160.63 ↗
32. MathWorks, Inc.: Matlab, Version R2014b, 2014.
33. ASTM International: Standard Designation E 2627–13, ASTM International, West Conshohocken, PA, 2013.
34. R. A. Lebensohn, C.N. Tome, Acta Metall. Mater., 41, 2611–2624 (1993)10.1016/0956-7151(93)90130-K ↗
35. O. D. Sherby, P. M. Burke, Prog. Mater. Sci., 13, 325–390 (1968)10.1016/0079-6425(68)90024-8 ↗
36. J.E. Bird, A.K. Mukherjee, J.E. Dorn: in D.G. Brandon and A. Rosen, eds., Proceedings of the International Conference on Quantitative Relation Between Properties and Microstructure, Israel Universities Press, Haifa, Israel, 1969, pp. 255–342.
37. S. Karashima, T. Iikubo, H. Oikawa, Trans. JIM, 13, 176–181 (1972)10.2320/matertrans1960.13.176 ↗
38. R. G. Stang, W. D. Nix, C. R. Barrett, Metall. Trans. A, 6, 2065–2017 (1975)10.1007/BF03161832 ↗
39. C. R. Barrett, W. D. Nix, O. D. Sherby, ASM Trans., 59, 3–15 (1966)
40. O. D. Sherby, R. H. Klundt, A. K. Miller, Metall. Trans. A, vol. 8, 843–850 (1977)10.1007/BF02661565 ↗
41. T. R. McNelley, K. Oh-oishi, A. P. Zhilyaev, S. Swaminathan, P. E. Krajewski, E. M. Taleff, Metall. Mater. Trans. A, 39, 50–64 (2008)10.1007/s11661-007-9401-5 ↗
42. S. Takaki, D. Akama, N. Nakada, T. Tsuchiyama, Mater. Trans. (JIM), 55, 28–34 (2014)10.2320/matertrans.MA201314 ↗
43. M. E. Kassner, Fundamentals of Creep in Metals and Alloys, 3rd ed., Elsevier Science, Burlington, MA, 7–102 (2015)10.1016/B978-0-08-099427-7.00002-5 ↗
44. K. Werner, Z. Metallkd., 39, 1–9 (1948)
45. H. Oikawa, Technol. Rep. Tohoku Univ., 47, 67–77 (1982)
46. MTEX Documentation: https://mtex-toolbox.github.io/Documentation.html, (2020).
47. T. G. Nieh, J. Wadsworth, O. D. Sherby, Superplasticity in Metals and Ceramics, Cambridge University Press, New York, NY (1997)10.1017/CBO9780511525230 ↗
48. O. D. Sherby, J. Wadsworth, Prog. Mater. Sci., 33, 169–221 (1989)10.1016/0079-6425(89)90004-2 ↗
49. T. E. Langdon, J. Mater. Sci., vol. 44, 5998–6010 (2009)10.1007/s10853-009-3780-5 ↗
50. C.S. Barrett and T.B. Massalski, Structure of Metals: Crystallographic Methods, Principles and Data, 3rd revised ed., Pergamon Press, Oxford, U.K., 1980.