journal article·2020-12

High-Strength Al-Zn-Cu-Based Alloy Synthesized by High-Pressure Die-Casting Method

Sang-Soo Shin, Sung-Jae Won, Hyeongsub So, Sang-Kee Lee, Kyou-Hyun Kim

Publisher page

Abstract

High-strength alloys of Al-xZn-3Cu (x = 20, 30, 40 wt pct) are developed for die-casting process. The maximum tensile strength of the developed alloy is 435 MPa, with a stain to fracture of ~ 4 pct. Microstructural investigation shows that the grain size of α-Al gradually decreases and the area of the Zn-rich region increases as the amount of Zn increases. Local symmetry investigation reveals that the major phase of α-Al contains very fine nanoprecipitations of Zn phase (<10 nm), with a very small amount of strain along {1 $$ \bar{1} $$ 0}. In addition, the Zn-rich region of the grain boundary has a very complex microstructure. This study discusses the effect of the microstructure of the developed Al alloys on the mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. [1] H. Ye: J. Mater. Eng. Perform., 2003, vol. 12, pp. 288-97.10.1361/105994903770343132 ↗
2. [2] J.A. Taylor: Proc. Mater. Sci., 2012, vol. 1, pp. 19-33.10.1016/j.mspro.2012.06.004 ↗
3. [3] Z.X. Liang, B. Ye, L. Zhang, Q.G. Wang, W.Y. Yang and Q.D. Wang: Mater. Lett., 2013, vol. 97, pp. 104-7.10.1016/j.matlet.2013.01.112 ↗
4. [4] M. Djurdjevic, H. Jiang and J. Sokolowski: Mater. Charact., 2001, vol. 46, pp. 31-8.10.1016/S1044-5803(00)00090-5 ↗
5. [5] W.K. Krajewski, J. Buraś, P.K. Krajewski, A.L. Greer, K. Faerber and P. Schumacher: Mater. Today. Proc., 2015, vol. 2, 4978-83.10.1016/j.matpr.2015.10.078 ↗
6. [6] D. Dumont, A. Deschamps and Y. Brechet: Mater. Sci. Eng. A, 2003, vol. 356, pp. 326-36.10.1016/S0921-5093(03)00145-X ↗
7. [7] R. Li, R. Li and Y. Bai: Trans. Nonferr. Met. Soc. China, 2010, vol. 20, pp. 59-63.10.1016/S1003-6326(09)60097-2 ↗
8. [8] H. Yu, M. Wang, Y. Jia, Z. Xiao, C. Chen, Q. Lei, Z. Li, W. Chen, H. Zhang, Y. Wang, C. Cai: J. Alloy Compd., 2014, vol. 601, pp. 120–125.10.1016/j.jallcom.2014.02.126 ↗
9. [9] S. Z. Han, E.-A. Choi, H. W. Park, S. H. Lim, J. Lee, J. H. Ahn, N. –M. Hwang, K. Kim: Sci.Rep. 7, 12286 (2017)10.1038/s41598-017-12490-5 ↗
10. [10] Ž. Skoko, S. Popović and G. Štefanić: Croat. Chem. Acta, 2009, vol. 82, pp. 405-20.
11. [11] D. Mirkovic, J. Grobner and R. Schmid-Fetzer: Acta Mater., 2008, vol. 56, pp. 5214-22.10.1016/j.actamat.2008.07.001 ↗
12. [12] S.S. Shin, K.M. Lim and I.M. Park: Mater.Sci. Eng. A, 2017, vol. 679, pp 340-9.10.1016/j.msea.2016.09.022 ↗
13. [13] S.S. Shin, K.M. Lim and I.M. Park: J. Alloy Compd., 2016, vol. 671, pp. 517–26.10.1016/j.jallcom.2016.02.127 ↗
14. T. Shanmugasundaram, B.S. Murty and V. SubramanyaSarma (2006) Scr. Mater. 54: 2013-17.10.1016/j.scriptamat.2006.03.012 ↗
15. [15] H. Yang, S. Ji and Z. Fan: Mater. Des. 2015, vol. 85, pp. 823-32.10.1016/j.matdes.2015.07.074 ↗
16. [16] S. Otarawanna and A.K. Dahle: Fundamentals of Aluminium Metallurgy, 1st ed., Woodhead Publishing, Oxford, UK, 2011, pp. 141-54.10.1533/9780857090256.1.141 ↗
17. [17] K.-H. Kim and J.-M. Zuo: Ultramicroscopy, 2013, vol. 124, pp. 71-6.10.1016/j.ultramic.2012.09.002 ↗
18. [18] J.C.H. Spence and J.M. Zuo: Electron Microdiffraction, Plenum Press, New York, NY, 1992, pp. 296-322.10.1007/978-1-4899-2353-0 ↗
19. [19] L. Holzer, F. Indutnyi, P.H. Gasser, B. Munch and M. Wegmann: J. Microsc., 2004, vol. 216, pp. 84-95.10.1111/j.0022-2720.2004.01397.x ↗
20. [20] M. Timpel, N. Wanderka, B.S. Murty and J. Banhart: Acta Mater., 2010, vol. 58, pp. 6600-8.10.1016/j.actamat.2010.08.021 ↗
21. [21] G. Han and X. Liu: Acta Mater., 2016, vol. 114, pp. 54–66.10.1016/j.actamat.2016.05.012 ↗
22. [22] K.H. Kim and J.M. Zuo: Acta Crystall., 2014, vol. A70, 583-90.
23. V. Raghavan (2007) J. Phase Equilib. Differ. 28(2): 183-188.10.1007/s11669-007-9025-x ↗