Characteristic Dependency of Hydrogen-Affected Fatigue Crack Growth and Crack Tip Plasticity on Low Loading Frequency in α-Iron
Source abstract
Abstract
Aiming to investigate the dependency of hydrogen-affected fatigue crack growth (HAFCG) on the loading frequency f, this study experimentally characterized the HAFCG in a commercially pure iron as a function of f ranging from 0.02 to 20 Hz as well as a stress intensity factor range ΔK and hydrogen gas pressure $$ P_{{{\text{H}}2 }} $$ . The crack tip plasticity was analyzed by interferometric microscopy and transmission electron microscopy in addition to the fracture surface observation. As a result, the amount of FCG rate acceleration by hydrogen increases as f decreases until it reaches a critical value (f = 2 Hz at $$ P_{{{\text{H}}2 }} $$ = 3.5 MPa, f = 0.2 Hz at $$ P_{{{\text{H}}2 }} $$ = 35 MPa), while the HAFCG rate greatly decreases once f decreases below the critical value. At the same time, the fracture mode at $$ P_{{{\text{H}}2 }} $$ = 3.5 MPa changes from brittle quasi-cleavage to a more ductile manner showing no clear hydrogen influence. On the other hand, the size of cleavage-like facets becomes large in case of $$ P_{{{\text{H}}2 }} $$ = 35 MPa suggesting that the number of lattice planes causing cleavage is reduced because of less hydrogen effect. The crack tip plasticity reduction by hydrogen is clearly confirmed while the HAFCG enhancement occurs above the critical value of f. In contrast, at f below the critical value, the crack tip plasticity is recovered to almost the same level as in the inert environment. Based on a theoretical estimation of hydrogen diffusion from the crack tip, the critical value of f causing this reversal f dependency is likely determined by the hydrogen concentration gradient in the vicinity of the crack tip. Although the associated mechanism is still unclear, it is suggested that the dynamic interaction between mobile dislocations and diffusing hydrogen atoms is important in clarifying the mechanism of HAFCG.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. G. Hénaff, G. Odemer, and A. Tonneau-Morel: Int. J. Fatigue, 2007, vol. 29, pp. 1927–40.10.1016/j.ijfatigue.2007.03.014 ↗
2. Y. Murakami and S. Matsuoka: Eng. Fract. Mech., 2010, vol. 77, pp. 1926–40.10.1016/j.engfracmech.2010.04.012 ↗
3. S.P. Lynch: Metall. Mater. Trans. A, 2012, vol. 44, pp. 1209–29.
4. M.B. Djukic, G.M. Bakic, V. Sijacki-Zeravcic, A. Sedmak, and B. Rajicic: Eng. Fract. Mech., 2019, vol. 216, p. 106528.10.1016/j.engfracmech.2019.106528 ↗
5. 5 N. Nanninga, A. Slifka, Y. Levy, and C. White: J. Res. Natl. Inst. Stand. Technol., 2010, vol. 115, p. 437.10.6028/jres.115.030 ↗
6. 6 W.H. Johnson: Proc. R. Soc. London, 1874, vol. 23, pp. 168–79.
7. 7 R.A. Oriani and P.H. Josephic: Scr. Metall., 1972, vol. 6, pp. 681–8.10.1016/0036-9748(72)90126-3 ↗
8. 8 R.A. Oriani: Berichte der Bunsengesellschaft, Technol. Asp., 1972, vol. 76, pp. 848–57.10.1002/bbpc.19720760864 ↗
9. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
10. S.P. Lynch and N.E. Ryan: in Proc. Second Int. Congr. Hydrog. Met., 1977, pp. 369–76.
11. M. Nagumo: ISIJ Int., 2001, vol. 41, pp. 590–8.10.2355/isijinternational.41.590 ↗
12. L. Jemblie, V. Olden, and O.M. Akselsen: Int. J. Hydrogen Energy (2017) 10.1016/j.ijhydene.2017.02.211.10.1016/j.ijhydene.2017.02.211 ↗
13. L. Jemblie, O.M. Akselsen, and V. Olden: Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 2017, vol. (in press), pp. 1–16.
14. A. Tehranchi and W.A. Curtin: Eng. Fract. Mech., 2019, vol. 216, p. 106502.10.1016/j.engfracmech.2019.106502 ↗
15. S. Taketomi, R. Matsumoto, and S. Hagihara: ISIJ Int., 2017, vol. 57, pp. 2058–64.10.2355/isijinternational.ISIJINT-2017-172 ↗
16. M.B. Djukic, V. Sijacki-Zeravcic, G.M. Bakic, A. Sedmak, and B. Rajicic: Eng. Fail. Anal., 2015, vol. 58, pp. 485–98.10.1016/j.engfailanal.2015.05.017 ↗
17. M.B. Djukic, G.M. Bakic, V.S. Zeravcic, A. Sedmak, and B. Rajicic: Corrosion, 2016, vol. 72, pp. 943–61.10.5006/1958 ↗
18. M. Koyama, C.C. Tasan, E. Akiyama, K. Tsuzaki, and D. Raabe: Acta Mater., 2014, vol. 70, pp. 174–87.10.1016/j.actamat.2014.01.048 ↗
19. Y. Hu, C. Dong, H. Luo, K. Xiao, P. Zhong, and X. Li: Metall. Mater. Trans. A 2017, vol. 48, pp. 4046–57.10.1007/s11661-017-4159-x ↗
20. J. Rehrl, K. Mraczek, A. Pichler, and E. Werner: Mater. Sci. Eng. A, 2014, vol. 590, pp. 360–7.10.1016/j.msea.2013.10.044 ↗
21. D. Sasaki, M. Koyama, and H. Noguchi: Mater. Sci. Eng. A, 2015, vol. 640, pp. 72–81.10.1016/j.msea.2015.05.083 ↗
22. A. Nagao, M. Dadfarnia, B.P. Somerday, P. Sofronis, and R.O. Ritchie: J. Mech. Phys. Solids, 2018, vol. 112, pp. 403–30.10.1016/j.jmps.2017.12.016 ↗
23. B.S. Kumar, V. Kain, M. Singh, and B. Vishwanadh: Mater. Sci. Eng. A, 2017, vol. 700, pp. 140–51.10.1016/j.msea.2017.05.086 ↗
24. Y. Ogawa, D. Birenis, H. Matsunaga, O. Takakuwa, J. Yamabe, Ø. Prytz, and A. Thøgersen: Mater. Sci. Eng. A, 2018, vol. 733, pp. 316–28.10.1016/j.msea.2018.07.014 ↗
25. L. Wan, W. Tong, A. Ishii, J. Du, and N. Ishikawa: Int. J. Plast., 2018, pp. 1–26.
26. S. Wang, M.L. Martin, I.M. Robertson, and P. Sofronis: Acta Mater., 2016, vol. 107, pp. 279–88.10.1016/j.actamat.2016.01.067 ↗
27. T. Shinko, G. Henaff, D. Halm, G. Benoit, G. Bilotta, and M. Arzaghi: Int. J. Fatigue, (2018). https://doi.org/10.1016/j.ijfatigue.2018.12.009.10.1016/j.ijfatigue.2018.12.009 ↗
28. S. Matsuoka, N. Tsutsumi, and Y. Murakami: Trans. Japan Soc. Mech. Eng. Ser. A (in Japanese), 2008, vol. 74, pp. 1528–37.10.1299/kikaia.74.1528 ↗
29. Y. Murakami, T. Kanezaki, Y. Mine, and S. Matsuoka: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1327–39.10.1007/s11661-008-9506-5 ↗
30. H. Nishikawa, Y. Oda, and H. Noguchi: J. Solid Mech. Mater. Eng., 2011, vol. 5, pp. 370–85.10.1299/jmmp.5.370 ↗
31. D. Birenis, Y. Ogawa, H. Matsunaga, O. Takakuwa, J. Yamabe, Ø. Prytz, and A. Thøgersen: Acta Mater., 2018, vol. 156, pp. 245–53.10.1016/j.actamat.2018.06.041 ↗
32. D. Birenis, Y. Ogawa, H. Matsunaga, O. Takakuwa, J. Yamabe, Ø. Prytz, and A. Thøgersen: MATEC Web Conf., 2018, vol. 165, p. 03010.10.1051/matecconf/201816503010 ↗
33. M.L. Martin, M. Dadfarnia, A. Nagao, S. Wang, and P. Sofronis: Acta Mater., 2019, vol. 165, pp. 734–50.10.1016/j.actamat.2018.12.014 ↗
34. T.J. Marrow, P.J. Cotterill, and J.E. King: Acta Metall. Mater., 1992, vol. 40, pp. 2059–68.10.1016/0956-7151(92)90192-H ↗
35. T. Shinko, G. Hénaff, D. Halm, and G. Benoit: MATEC Web Conf., 2018, vol. 165, p. 03006.10.1051/matecconf/201816503006 ↗
36. D. Birenis, Y. Ogawa, H. Matsunaga, O. Takakuwa, J. Yamabe, Ø. Prytz, and A. Thøgersen: Mater. Sci. Eng. A, 2019, vol. 756, pp. 396–404.10.1016/j.msea.2019.04.084 ↗
37. S. Taketomi, R. Matsumoto, and N. Miyazaki: J. Mater. Res., 2011, vol. 26, pp. 1269–78.10.1557/jmr.2011.106 ↗
38. N. Taketomi, S., Imanishi, S., Matsumoto, R., Miyazaki: in 13th Int. Conf. Fract., 2013, pp. 16–21.
39. T. Hajilou, Y. Deng, B.R. Rogne, N. Kheradmand, and A. Barnoush: Scr. Mater., 2017, vol. 132, pp. 17–21.10.1016/j.scriptamat.2017.01.019 ↗
40. H. Matsui, H. Kimura, and S. Moriya: Mater. Sci. Eng., 1979, vol. 40, pp. 207–16.10.1016/0025-5416(79)90191-5 ↗
41. S. Moriya, H. Matsui, and H. Kimura: Mater. Sci. Eng., 1979, vol. 40, pp. 217–25.10.1016/0025-5416(79)90192-7 ↗
42. H. Matsui, H. Kimura, and A. Kimura: Mater. Sci. Eng., 1979, vol. 40, pp. 227–34.10.1016/0025-5416(79)90193-9 ↗
43. Y. Ogawa, D. Birenis, H. Matsunaga, O. Takakuwa, J. Yamabe, Ø. Prytz, and A. Thøgersen: MATEC Web Conf., 2018, vol. 165, p. 03011.10.1051/matecconf/201816503011 ↗
44. M. Yoshikawa, T. Matsuo, N. Tsutsumi, H. Matsunaga, and S. Matsuoka: Trans. JSME (in Japanese), 2014, vol. 80, p. SMM0254.10.1299/transjsme.2014smm0254 ↗
45. J. Yamabe, M. Yoshikawa, H. Matsunaga, and S. Matsuoka: Procedia Struct. Integr., 2016, vol. 2, pp. 525–32.10.1016/j.prostr.2016.06.068 ↗
46. Z. Sun, C. Moriconi, G. Benoit, D. Halm, and G. Henaff: Metall. Mater. Trans. A, 2012, vol. 44, pp. 1320–30.
47. G. Bilotta, M. Arzaghi, G. Hénaff, G. Benoit, and D. Halm: Vol. 6B Mater. Fabr., 2016, p. V06BT06A026.
48. G. Bilotta, M. Arzaghi, G. Benoit, D. Halm, G. Henaff, and T. Shinko: in Proc. Int. Hydrog. Conf. (IHC 2016) Mater. Perform. Hydrog. Environ., 2016, pp. 1–10.
49. Y. Takeo and S. Kiyoshi: Eng. Fract. Mech., (1976) https://doi.org/10.1016/0013-7944(76)90078-3.10.1016/0013-7944(76)90078-3 ↗
50. G. Bilotta, M. Arzaghi, G. Hénaff, G. Benoit, C. Moriconi, and D. Halm: in Volume 6B: Materials and Fabrication, ASME, 2014, p. V06BT06A014.
51. B.P. Somerday, P. Sofronis, K.A. Nibur, C.S. Marchi, and R. Kirchheim: Acta Mater., 2013, vol. 61, pp. 6153–70.10.1016/j.actamat.2013.07.001 ↗
52. S. Matsuoka, H. Tanaka, N. Homma, and Y. Murakami: Int. J. Fract., 2011, vol. 168, pp. 101–12.10.1007/s10704-010-9560-z ↗
53. A. Macadre, M. Artamonov, S. Matsuoka, and J. Furtado: Eng. Fract. Mech., 2011, vol. 78, pp. 3196–211.10.1016/j.engfracmech.2011.09.007 ↗
54. H. Matsunaga, T. Nakashima, K. Yamada, T. Matsuo, J. Yamabe, and S. Matsuoka: in Vol. 6B Mater. Fabr., 2016, p. V06BT06A031.
55. H. Matsunaga, O. Takakuwa, J. Yamabe, and S. Matsuoka: Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 2017, vol. 375, p. 20160412.10.1098/rsta.2016.0412 ↗
56. Y. Ogawa, D. Birenis, H. Matsunaga, A. Thøgersen, Ø. Prytz, O. Takakuwa, and J. Yamabe: Scr. Mater., 2017, vol. 140, pp. 13–7.10.1016/j.scriptamat.2017.06.037 ↗
57. H. Nishikawa, Y. Oda, Y. Takahashi, and H. Noguchi: J. Solid Mech. Mater. Eng., 2011, vol. 5, pp. 179–90.10.1299/jmmp.5.179 ↗
58. O. Takakuwa, Y. Ogawa, S. Okazaki, M. Nakamura, and H. Matsunaga: Corros. Sci., 2020, p. 108558.10.1016/j.corsci.2020.108558 ↗
59. Y. Deng, T. Hajilou, D. Wan, N. Kheradmand, and A. Barnoush: Scr. Mater., 2017, vol. 127, pp. 19–23.10.1016/j.scriptamat.2016.08.026 ↗
60. T. Kanezaki, C. Narazaki, Y. Mine, S. Matsuoka, and Y. Murakami: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 2604–19.10.1016/j.ijhydene.2008.02.067 ↗
61. Y. Murakami, T. Kanezaki, and Y. Mine: Metall. Mater. Trans. a-Physical Metall. Mater. Sci., 2010, vol. 41A, pp. 2548–62.10.1007/s11661-010-0275-6 ↗
62. T. Matsuo, S. Matsuoka, and Y. Murakami: in 18th European Conference on Fracture, Dresden, Germany, 2010, pp. 1–8.
63. Y. Fukai: The Metal-Hydrogen System, vol. 21, 2nd edn., Springer, New York, 2005.10.1007/3-540-28883-X ↗
64. 64 K.A. Nibur, B.P. Somerday, C.S. Marchi, J.W. Foulk III, M. Dadfarnia, and P. Sofronis: Metall. Mater. Trans. a-Physical Metall. Mater. Sci., 2013, vol. 44A, pp. 248–69.10.1007/s11661-012-1400-5 ↗
65. H. Shoda, H. Suzuki, K. Takai, and Y. Hagihara: Tetsu-to-Hagane, 2009, vol. 95, pp. 573–81.10.2355/tetsutohagane.95.573 ↗
66. K. Takai, H. Shoda, H. Suzuki, and M. Nagumo: Acta Mater., 2008, vol. 56, pp. 5158–67.10.1016/j.actamat.2008.06.031 ↗
67. P. Sofronis and R.M. McMeeking: J. Mech. Phys. Solids, 1989, vol. 37, pp. 317–50.10.1016/0022-5096(89)90002-1 ↗
68. D. Wan, Y. Deng, J.I.H. Meling, A. Alvaro, and A. Barnoush: Acta Mater., 2019, vol. 170, pp. 87–99.10.1016/j.actamat.2019.03.032 ↗