journal article·2020-06

Effect of Welding Speed on Texture in Laser-Welded Dual-Phase Steel

Subhajit Mitra, Kanwer Singh Arora, Basudev Bhattacharya, Shiv Brat Singh

Publisher page

Abstract

The present study makes an attempt to understand the influence of welding speed on the formability of a welded microalloyed steel. An optimum heat input for laser welding was maintained in this study, under bead-on-plate and butt-welding conditions, with varying welding speed. Initially, the heat-affected zone (HAZ) had a moderate γ-fiber texture, which was later distorted with the increased speed of welding. There was an enhancement of rotated cube {001}〈110〉 and cube {001}〈010〉 orientations. The fusion zone (FZ) exhibited mainly random texture, without any presence of γ-fiber. However, faster speeds resulted in strengthening of intensities close to the rotated cube {001}〈110〉 and cube {001}〈010〉 orientations in the FZ. The increased welding speed resulted in enlargement of dimples of fracture surface for the HAZ, finally leading to a transition into a mixed mode of fracture. With increased welding speed, the FZ exhibited a drop in the equiaxiality of the austenite grains. The enhancement of the columnar nature of the austenite grains at the FZ could be correlated with the cube texture formation and deterioration in formability of the welded material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. H.J. Bunge: Texture Analysis in Materials Science, Butterworths, London, 1982.
2. H.J. Bunge: Int. Mater. Rev., 1987, vol. 32 (1), pp. 265–91.10.1179/imr.1987.32.1.265 ↗
3. H. Inagaki, K. Kurihara, and I. Kozasu: Trans. Iron Steel Inst. Jpn., 1977, vol. 17 (2), pp. 75–81.10.2355/isijinternational1966.17.75 ↗
4. R.K. Ray and J.J. Jonas: Int. Mater. Rev., 1990, vol. 35 (1), pp. 1–36.10.1179/095066090790324046 ↗
5. A. Riemer, S. Leuders, M. Thöne, H.A. Richard, T. Tröster, and T. Niendorf: Eng. Fract. Mech., 2014, vol. 120, pp. 15–25.10.1016/j.engfracmech.2014.03.008 ↗
6. J. Suryawanshi, K.G. Prashanth, and U. Ramamurty: Mater. Sci. Eng. A, 2017, vol. 696, pp. 113–21.10.1016/j.msea.2017.04.058 ↗
7. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Progr. Mater. Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
8. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1994, vol. 39 (4), pp. 129–72.10.1179/imr.1994.39.4.129 ↗
9. X.J. Shen, S. Tang, Y.J. Wu, X.L. Yang, J. Chen, Z.Y. Liu, R.D.K. Misra, and G.D. Wang: Mater. Sci. Eng.: A, 2017, vol. 685, pp. 194–204.10.1016/j.msea.2016.12.108 ↗
10. I. Lischewski and G. Gottstein: Acta Mater., 2011, vol. 59 (4), pp. 1530–41.10.1016/j.actamat.2010.11.017 ↗
11. R. Joodaki, S.R. AlaviZaree, K. Gheisari, and M. Eskandari: J. Mater. Eng. Perform., 2017, vol. 26, pp. 2003–13.10.1007/s11665-017-2673-z ↗
12. Q. Chu, R. Baib, H. Jian, Z. Lei, N. Hu, and C. Yan: Mater. Charact., 2018, vol. 137, pp. 269–76.10.1016/j.matchar.2018.01.030 ↗
13. H. Gao, G. Agarwal, M. Amirthalingam, M.J.M. Hermans, and I.M. Richardson: Weld. World, 2018, vol. 62, pp. 71–78.10.1007/s40194-017-0524-z ↗
14. T. Soysal and S. Kou: Acta Mater., 2018, vol. 143, pp. 181–97.10.1016/j.actamat.2017.09.065 ↗
15. S. Suwas and R.K. Ray: Crystallographic Texture of Materials, Springer, London, 2014.10.1007/978-1-4471-6314-5 ↗
16. S. Keeler, M. Kimchi, and P.J. Mconey: Advanced High-Strength Steels Application Guidelines, Technical Report 6.0, World Auto Steel, Brussels, 2017.
17. Z. Yang and A. Bandivadekar: “Light-Duty Vehicle Greenhouse Gas and Fuel Economy Standards,” Technical Report, The International Council on Clean Transportation, Washington, DC, 2017.
18. C. Lesch, N. Kwiaton, and F.B. Klose: Steel Res. Int., 2017, vol. 88 (10), pp. 1–21.10.1002/srin.201700210 ↗
19. S. Katayama: Handbook of Laser Welding Technologies, Woodhead Publishing Series in Electronic and Optical Materials, Elsevier, Amsterdam, 2013.10.1533/9780857098771 ↗
20. M.S. Wȩglowski, S. Błacha, and A. Phillips: Vacuum, 2016, vol. 130, pp. 72–92.10.1016/j.vacuum.2016.05.004 ↗
21. K.M. Hong and Y.C. Shin: J. Mater. Process. Technol., 2017, vol. 245, pp. 46–69.10.1016/j.jmatprotec.2017.02.008 ↗
22. W. Chen, P. Ackerson, and P. Molian: Mater. Des., 2009, vol. 30 (2), pp. 245–51.10.1016/j.matdes.2008.05.009 ↗
23. A.K. Sinha, D.Y. Kim, and D. Ceglarek: Opt. Las. Eng., 2013, vol. 51 (10), pp. 1143–52.10.1016/j.optlaseng.2013.04.012 ↗
24. Q. Sun, H. Di, J. Li, B. Wu, and R.D.K. Misra: Mater. Sci. Eng.: A, 2016, vol. 669, pp. 150–58.10.1016/j.msea.2016.05.079 ↗
25. M. Moradi, M. Ghoreishi, and A. Khorram: Las. Eng., 2018, vol. 39 (3–6), pp. 379–91
26. M. Nouroozi, H. Mirzadeh, and M. Zamani: Mater. Sci. Eng.: A, 2018, vol. 736, pp. 22–26.10.1016/j.msea.2018.08.088 ↗
27. A. Das and S. Tarafder: Int. J. Plasticity, 2009, vol. 25, pp. 2222–47.10.1016/j.ijplas.2009.03.003 ↗
28. C. Xie, S. Yang, H. Liu, Q. Zhang, Y. Cao, and Y. Wang: J. Mater. Eng. Perform., 2017, vol. 26 (8), pp. 3794–3801.10.1007/s11665-017-2848-7 ↗
29. G. Agarwal, M. Amirthalingam, S.C. Moon, R.J. Dippenaar, I.M. Richardson, and M.J.M. Hermans: Scripta Mater., 2018, vol. 146, pp. 105–09.10.1016/j.scriptamat.2017.11.003 ↗
30. L. Xie, P. Yang, N. Zhang, C. Zong, D. Xia, and W. Mao: J. Magn. Magn. Mater., 2014, vol. 356, pp. 1–4.10.1016/j.jmmm.2013.12.045 ↗
31. J. Li, C. Yuan, Q. Qi, X. Bao, and X. Gao: Metals, 2017, vol. 7, p. 36.10.3390/met7020036 ↗