Metallurgical Phase Transformation and Behavior of Steels Under Impact Loading
Source abstract
Abstract
This study deals with the mechanical behavior of the austenitic stainless steel, AISI 304, under quasi-static and impact loadings. In particular, the evolution of the transformation-induced plasticity (TRIP) is investigated. Several compression tests have been performed at various strain rates under both static and impact conditions (crash tests). In order to show the influence of the strain rate on the phase transformation, the microstructures of as-received and deformed specimens have been observed with a scanning electron microscope. Then, the newly formed ferromagnetic martensitic phase is analyzed with the help of the vibrating sample magnetic (VSM) method and by X-ray diffraction (XRD). The results obtained from the mechanical testing indicate that the TRIP effect is actually occurring since a significant change of the curve slope is visible during the hardening regime in the stress–strain curve. The VSM and XRD techniques, on the other hand, show that the proportion of the martensitic phase is reduced when the strain rate is increased. The quantity of martensite formed is greater when quasi-static loadings are applied to the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. W. Mitter: Materialkundlich-Technische Reihe, Berlin-Stuttgart, 1987.
2. J. Galán, L. Samek, P.Verleysen, K .Verbeken and Y. Houbaert: Rev Metal Madrid, 2012, vol. 48, pp. 118–131.10.3989/revmetalm.1158 ↗
3. Q. Liu, Q. Zhou, J. Venezuela, M. Zhang, J. Wang and A. Atrens: Corros Rev, 2016, vol 34(3), pp. 127–152.10.1515/corrrev-2015-0083 ↗
4. V.F. Zackay, ER. Parker, D. Fahr and R. Busch: ASM Trans Q, 1967, vol. 60, pp. 252–259.
5. P. Hausild, V. Davydov, J. Drahokoupil, M. Landa and P. Pilvin : Mater Des, 2010, vol. 31, pp. 1821–1827.10.1016/j.matdes.2009.11.008 ↗
6. H Fathi, E Emadoddin and HR Mohammadian Semnani: J Mater Res, vol. 31(14), pp. 2136-2146, 2016.10.1557/jmr.2016.251 ↗
7. G. Colette: INPL, PhD Dissertation, 1978.
8. E. Gautier, J.S. Zhang and X.M. Zhang : J Phys IV, 1995, vol 5, pp. 41-50.
9. N.C. Goel, S. Sangal, and K. Tangri: Metall Trans A, 1985, vol. 16, pp. 2013–2021.10.1007/BF02662402 ↗
10. S. Sangal, N.C. Goel and K. Tangri: Metall Trans A, vol. 16, pp. 2023-2029, 198510.1007/BF02662403 ↗
11. A.K. Sachedv: Acta Metall, 1983, vol 31, pp. 2037-2042.10.1016/0001-6160(83)90021-4 ↗
12. P. Jacques, Q. Furnémont, A. Mertens and F. Delnnay: Philos Mag A, 2001, vol. 81, pp. 1789-1812.10.1080/01418610108216637 ↗
13. Bhadeshia HKDH: ISIJ International, 2002, vol 42, pp. 1059-1060.10.2355/isijinternational.42.1059 ↗
14. J.R. Patel and M. Cohen: Acta Metall, 1953, vol 1, pp. 531-538.10.1016/0001-6160(53)90083-2 ↗
15. G.B. Olson and M. Cohen: J Less-Common Met, 1972, vol. 28, pp. 107-118.10.1016/0022-5088(72)90173-7 ↗
16. G.B. Olson and M. Cohen: Metall Trans A, 1992, vol. 13, pp. 1907-1914.10.1007/BF02645934 ↗
17. I. Tamura and C.M. Wyman: ASM Int., 1992, pp. 227–42.
18. R.G. Stringfellow, D.M. Parks, G.B. Olson: Acta Metall Mater, 1992, vol. 40, pp. 1703-1716.10.1016/0956-7151(92)90114-T ↗
19. G.B. Olson: Processing and Structures, ASM, Ohio, pp 391–424, 1986.
20. P.M. Kelly: T Jim, 1992, vol 33, pp. 235-242.
21. G.B. Olson and M. Azrin: Metall Trans A, 1978, vol. 9, pp. 713-721.10.1007/BF02659928 ↗
22. J. Liu, C. Chen, Q. Feng, X. Fang, H. Wang, F. Liu, and J. Lu: Mater. Sci. Eng. A, 2017, vol. 703, pp. 236–43.10.1016/j.msea.2017.06.107 ↗
23. F. Marketz and F.D. Fischer: Metall Mater Trans A, 1995, vol. 26, pp. 267-278.10.1007/BF02664665 ↗
24. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud and T. Antretter: Int J Plasticity, 2000, vol. 16, pp. 723-748.10.1016/S0749-6419(99)00078-9 ↗
25. C.L. Magee and H.W. Paxton: Trans. Metall. Soc. AIME, vol. 242, pp. 1741-1756, 1968
26. C.L. Magee and H.W. Paxton: Carnegie Institute of Technology, 1966.
27. E. Scheil: ZAAC, 1932, vol. 207 , pp. 21-40.
28. G.W. Greenwood and R.H. Johnson: P Roy Soc Lond A Mat, 1965, vol 283 (1349), pp.403-422.
29. P. Jacques, Q. Furnémont, T. Pardoen and F. Delannay: Acta Mater, 2001, vol 49, pp. 139-152.10.1016/S1359-6454(00)00215-9 ↗
30. M. Erdogan and R. Priestner: Mater. Sci. Tech. Lond., vol. 18, pp. 369–376, 2002.10.1179/026708302225001679 ↗
31. J.C. Videau, G. Cailletaud, and A. Pineau: J. Phys. IV, 1996, vol. 6, pp. 465–74.
32. F. Azzouz, G. Cailletaud, T. Antretter, F.D. Fischer, and K. Tanaka: Proceedings Plasticity, Vancouver, 2000, pp 175–77.
33. J. Talonen, H. Hänninen, P. Nenonen and G. Pape: Metall Mater Trans A, 2005, vol. 36, pp. 421-432.10.1007/s11661-005-0313-y ↗
34. J. Talonen and H. Hänninen: Acta Materialia, 2007, vol.55/18, pp. 6108-6118.10.1016/j.actamat.2007.07.015 ↗
35. A.A. Lebedev and V.V. Kosarchuk: Int J Plasticity, 2000, vol. 16, pp. 749-767.10.1016/S0749-6419(99)00085-6 ↗
36. M.P. Miller and D.L. McDowell: J Eng Mater-T ASME,1996, vol. 118, pp. 28-36.10.1115/1.2805930 ↗
37. T. Iwamoto, T. Tsuta, and Y. Tomita: Int. J. Mech. Sci., 1996, vol. 40, pp. 173–182.10.1016/S0020-7403(97)00047-7 ↗
38. L. Krüger, S. Wolf, U. Martin, P. Scheller, A. Jahn, and A. Weiss: in Dymat. EDP Sciences, Brüssel, pp 1069–74, 2009.
39. L. Krüger, S. Wolf, U. Martin, P. Scheller, A. Jahn and A. Weiss and P.R. Scheller: Steel Res Int, 2011 , vol.82; pp.1087–1093.10.1002/srin.201100067 ↗
40. S.W. Yoo, C.S. Lee, W.S. Park, M.H. Kim and J.M. Lee: Comp Mater Sci, 2011, vol. 50, pp. 2014–2027.10.1016/j.commatsci.2011.02.002 ↗
41. M. Isakov, S. Hiermaier, and V. kuokkala: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2352–55.10.1007/s11661-015-2862-z ↗
42. Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo: Mater. Sci. Eng. A, 2012, vol. 552, pp. 514–22.10.1016/j.msea.2012.05.080 ↗
43. H. Wang, Y. Jeong, B. Clausen, Y. Liu, R.J. McCabe, F. Barlat and C.N. Tome: Mater Sci Eng A, 2016, vol.19-20 (649), pp. 174–183.10.1016/j.msea.2015.09.108 ↗
44. J.A. Lichtenfeld, M.C. Mataya, and C.J. Van Tyne: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2006, vol. 37, pp. 147–6210.1007/s11661-006-0160-5 ↗
45. H. Hamasaki, T. Ohno, T. Nakano, and E. Ishimaru: Int. J. Mech. Sci., 2018, vol. 146–147, pp. 536–43.10.1016/j.ijmecsci.2017.12.003 ↗
46. A.L. Roitburd and G. V. Kurdjumov: Mater. Sci. Eng., 1979, vol. 39, pp. 141–67.10.1016/0025-5416(79)90055-7 ↗
47. S.S.M. Tavares, J.M. Pardal, M.J. Gomes, H.F.G. Abreu, and M.R. Silva.: Mat. Char., 2009, vol. 60/8, pp. 907–11.10.1016/j.matchar.2009.02.001 ↗
48. A.A. Tiamiyu, M. Eskandari, M. Nezakat, X. Wang, J.A. Szpunar, and A.G. Odeshi: Mater. Des., 2016, vol. 112, pp. 309–19.10.1016/j.matdes.2016.09.087 ↗
49. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1982, vol. 13A, pp. 627-3510.1007/BF02644428 ↗
50. A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock: Scri. Mater, 2004, vol. 50, pp. 1445–1449.10.1016/j.scriptamat.2004.03.011 ↗
51. A. Younes, N. Dilmi, M. Khorchef, A. Bouamer, N.E. Bacha, and M. Zergoug: Appl. Surf. Sci., 2018, vol. 446, pp. 258–265.10.1016/j.apsusc.2017.12.160 ↗
52. H. Huang, J. Ding, and P.G. McCormick: Mat. Sci. Eng., 1996, vol. A 216/1–2, pp. 178–84.10.1016/0921-5093(96)10412-3 ↗
53. V. Tsakiris and D.V. Edmonds: Mat. Sci. Eng., 1999, vol. A 273–275, pp. 430–36.10.1016/S0921-5093(99)00322-6 ↗
54. T. Antretter, F.D. Fischer, K. Tanaka and G. Cailletaud: Steel Res, 2002, vol. 73, pp. 225-235.10.1002/srin.200200201 ↗
55. K. Shibata, T. Shimozono, Y. Kohno, and H. Otsuka: Mater. Trans. JIM, 2000, vol. 41, pp. 893–90.10.2320/matertrans1989.41.893 ↗
56. S.S.M Tavares, D. Fruchart and S. Miraglia: J Alloy Compd., 2000, vol. 307, pp. 311–31710.1016/S0925-8388(00)00874-4 ↗
57. L. Zuo, Y. Zhang and X. Zhao: Front. Phys. China, 2006, vol. 1, pp. 85-91.10.1007/s11467-005-0002-8 ↗
58. T. Kira, K. Murata, S. Inoue, K. Koterazawa, S.J. Jeong, G.S. Yang, and K. Inoue : Mater. Trans., 2004, vol. 45, pp. 1895–902.10.2320/matertrans.45.1895 ↗
59. F. Lischka: J. Achiev: Mater. Manuf. Eng., 2015, vol. 71, pp. 34–8.