journal article·2018-11

Effect of Aluminum on Borocarbides and Temper Softening Resistance of High-Boron High-Speed Steel

Xiangyi Ren, Hanguang Fu, Jiandong Xing, Shuli Tang

Publisher page

Abstract

The effects of aluminum content on the morphology of eutectic borocarbide and temper softening resistance of high-boron high-speed steel with 2.0 wt pct B-0.4 wt pct C-6.0 wt pct Cr-4.0 wt pct Mo-x wt pct Al-1.0 wt pct Si-1.0 wt pct V-0.5 wt pct Mn (x = 0.0, 1.0, 1.5, 2.0) have been investigated in the present work. The experimental results indicate that aluminum not only promotes the refining and nodulizing of borocarbide, but also improves the red-hardness of the alloy. The as-cast microstructure of high-boron high-speed steel (with different aluminum contents) consists of matrix α-Fe, eutectic borocarbide M2(B,C), and boron-cementite M3(B,C) (M = Fe, Cr, Mo, V, Mn). Borocarbide presents a continuous network structure in the microstructure of alloy without aluminum addition. With increasing aluminum content, borocarbide is spheroidized, and its size decreases. Furthermore, the variation in aluminum content barely affects the phase type. The hardness testing results of heat-treated samples at 1050 °C, 1100 °C, and 1150 °C reveal that the quenching temperature for obtaining the martensite matrix rises with an increase of aluminum content. However, the alloy matrix with 2.0 wt pct aluminum cannot transform to a martensite matrix through quenching, even at 1150 °C. The red-hardness is defined as the alloy hardness after four rounds of tempering at 600 °C for 1 hour. The hardness of alloy without aluminum addition reduces significantly after tempering, while the hardness of alloy with 1.0 wt pct aluminum exhibited the highest value. Moreover, no apparent change in borocarbide morphology occurred after tempering, indicating that the alloy microstructure renders good tempering stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. M. Andersson, R. Finnstrom and T. Nylén: Ironmaking Steelmaking, 2004, vol. 31, pp. 383-389.10.1179/030192304225018208 ↗
2. S. Spuzic, K. Strafford, C. Subramanian and G. Savage: Wear, 1994, vol. 176, pp. 261-271.10.1016/0043-1648(94)90155-4 ↗
3. W. Zamri, P. Kosashi, A. Tieu, Q. Zhu and H. Zhu: J. Mater. Pro. Technol., 2012, vol. 212, pp. 2597-2608.10.1016/j.jmatprotec.2012.07.007 ↗
4. G. Wu and Y. Wang: Adv. Mater. Res., 2012, vol. 548, pp. 538-543.10.4028/www.scientific.net/AMR.548.538 ↗
5. Y. Liu, Y. Jiang, R. Zhou and J. Feng: J. Alloys Compd., 2014, vol. 582, pp. 500-504.10.1016/j.jallcom.2013.08.045 ↗
6. C. Kim, J. Park, S. Lee, Y. Kim, N. Kim and J. Yang: Metall. Mater. Trans. A, 2005, vol. 36, pp. 87-97.10.1007/s11661-005-0141-0 ↗
7. S. Wei, J. Zhu, L. Xu and R. Long: Mater. Design, 2006, vol. 27, pp. 58-63.10.1016/j.matdes.2004.09.027 ↗
8. Z. Lv, H. Fu, J. Xing and S. Ma: J. Alloys. Compd., 2016, vol. 662, pp. 54-62.10.1016/j.jallcom.2015.11.171 ↗
9. H. Fu and Z. Jiang: Acta Met. Sini., 2006, vol. 42, pp. 545-548.
10. V. Astini, Y. Prasetyo and E. Baek: Met. Mater. Int., 2012, vol. 18, pp. 923-931.10.1007/s12540-012-6003-6 ↗
11. J. Kim, K. Ko, S. Noh, G. Kim and S. Kim: Wear, 2009, vol. 267, pp. 1415-1419.10.1016/j.wear.2009.03.017 ↗
12. X. Song, H. Liu, H. Fu and J. Xing: Foundry, 2008, vol. 57, pp. 498-503.
13. H. Fu: Foundry, 2005, vol. 54, pp. 859-863.
14. S. Liu, Y. Cheng, R. Long, S. Wei and G. Zhang: Foundry Technol., 2007, vol. 28, pp. 1526-1530.
15. L. He, Y. Liu, J. Li and B. Li: Mater. Design, 2012, vol. 36, pp. 88-93.10.1016/j.matdes.2011.10.043 ↗
16. Z. Huang, J. Xing and C. Guo: Mater. Design, 2010, vol. 31, pp. 3084-3089.10.1016/j.matdes.2010.01.003 ↗
17. A. Rottger, J. Lentz and W. Theisen: Mater. Design, 2015, vol. 88, pp. 420-429.10.1016/j.matdes.2015.08.157 ↗
18. N. Yuksel and S. Sahin: Mater. Design, 2014, vol. 58 (6), pp. 491-498.10.1016/j.matdes.2014.02.032 ↗
19. R. Sundeev, A. Glezer, A. Menushenkov, A. Shalimova and O. Chernysheva: Mater. Design, 2017, vol. 135 (5), pp. 77-83.10.1016/j.matdes.2017.08.062 ↗
20. Y. Yi, J. Xing, M. Wan, L. Yu, Y. Lu and Y. Jian: Mater. Sci. Eng. A, 2017, vol. 708, pp. 274-284.10.1016/j.msea.2017.09.135 ↗
21. J. Gu, H. Zhang, H. Fu and Y. Lei: Foundry Technol., 2011, vol. 32, pp. 1376-1379.
22. Z. Gui, W. Liang, Y. Liu and Y. Zhang: Mater. Design, 2014, vol. 60 (60), pp. 26-33.10.1016/j.matdes.2014.03.011 ↗
23. J. Kim, S. Hong, H. Park, Y. Kim and G. Park: Mater. Design, 2015, vol. 76, pp. 190-195.10.1016/j.matdes.2015.03.053 ↗
24. X. Zhou, F. Fang, Y. Tu, J. Jiang, H. Xu and W. Zhu: Acta Met. Sin., 2014, vol. 50 (7), pp. 769-776.
25. D. Yi, J. Xing, H. Fu, S. Ma and Z. Liu: Mater. Sci. Technol., 2010, vol. 26 (7), pp. 849-856.10.1179/026708309X12454008169302 ↗
26. Y. Yang, H. Fu, Y. Lei, K. Wang, L. Zhu and L. Jang: J. Mater. Eng. Perform., 2016, vol. 25, pp. 409-420.10.1007/s11665-015-1847-9 ↗
27. D. Ma and Z. Ma: Heavy Cast. Forg., 2008, vol. 3, pp. 10-12.
28. Y. Yang, H. Fu, K. Wang, Y. Lei, L. Zhu and L. Jiang: Trans. Mater. Heat Treat., 2016, vol. 37 (7), pp. 48-54.
29. J. Cao, C. Xiang, L. Li, D. Chen, and C. Qin: Steel, 1999, vol. 20(4), pp. 19-21.
30. X. Zhi, J. Xing and Y. Gao: Mater. Character., 2008, vol. 59 (9), pp. 1221-1226.10.1016/j.matchar.2007.10.010 ↗
31. Z. Huang, J. Xing and Y. Gao: Rare Metal Mater. Eng., 2011, vol. 40 (2), pp. 244-247.
32. W. Pabst, C. Berthold, E. Gregorov and A. Acute: J. Eur. Ceram. Soc., 2006, vol. 26 (7), pp. 1121-1130.10.1016/j.jeurceramsoc.2005.01.053 ↗
33. A. Rottger, S. Weber and W. Theisen: Mater. Sci. Eng. A, 2012, vol. 532, pp. 511-521.
34. X. Ren, H. Fu, J. Xing, Y. Yang and S. Tang: J. Mater. Res., 2017, vol. 32 (16), pp. 3078-3088.10.1557/jmr.2017.304 ↗
35. C. Guo and P. Kelly: Mater. Sci. Eng. A, 2003, vol. 352, pp. 40-45.10.1016/S0921-5093(02)00449-5 ↗
36. Z. Yu, H. Fu, Y. Jiang, Q. Cen, Y. Lei, R. Zhou and H. Guo: Materialwiss Werkst, 2012, vol. 43 (12), pp. 1080-1085.10.1002/mawe.201200058 ↗
37. S. Ma, J. Xing, H. Fu, Y. Gao and J. Zhang: Acta Mater., 2012, vol. 60, pp. 831-843.10.1016/j.actamat.2011.11.004 ↗
38. J. Gong, B. Yang, Y. Xiao and J. Xu: Mater. Sci. Eng. Powder Metall., 2013, vol. 18 (4), pp. 579-584.
39. R. Yang, L. Zhao, B. Wang and K. Chen: Transact. Mater. Heat Treat., 2009, vol. 30 (4), pp. 185-189.
40. J. Lentz, A. Rottger and W. Theisen: Acta Mater., 2016. vol. 119, pp. 80-91.10.1016/j.actamat.2016.08.009 ↗
41. X. Chen and Y. Li: Mater. Sci. Eng. A, 2010, vol. 528, pp. 770-775.10.1016/j.msea.2010.09.092 ↗
42. S. Ma, W. Pan, J. Xing, S. Guo, H. Fu and P. Lyu: Mater. Character., 2017. vol. 132, pp. 1-9.10.1016/j.matchar.2017.08.001 ↗