Defining the Post-Machined Sub-surface in Austenitic Stainless Steels
Source abstract
Abstract
Austenitic stainless steels grades, with differences in chemistry, stacking fault energy, and thermal conductivity, were subjected to vertical milling. Anodic potentiodynamic polarization was able to differentiate (with machining speed/strain rate) between different post-machined sub-surfaces in SS 316L and Alloy A (a Cu containing austenitic stainless steel: Sanicroe 28™), but not in SS 304L. However, such differences (in the post-machined sub-surfaces) were revealed in surface roughness, sub-surface residual stresses and misorientations, and in the relative presence of sub-surface Cr2O3 films. It was shown, quantitatively, that higher machining speed reduced surface roughness and also reduced the effective depths of the affected sub-surface layers. A qualitative explanation on the sub-surface microstructural developments was provided based on the temperature-dependent thermal conductivity values. The results herein represent a mechanistic understanding to rationalize the corrosion performance of widely adopted engineering alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. S. Ghosh, V. Kain (2010) Mater. Sci. Eng. A. 527:679–683.10.1016/j.msea.2009.08.039 ↗
2. A. Turnbull, K. Mingard, J.D. Lord, B. Roebuck, D.R. Tice and K.J. Mottershead: Corros. Sci., 2011, vol. 53, pp. 3398–3415.10.1016/j.corsci.2011.06.020 ↗
3. S.G. Acharyya, A. Khandelwal, V. Kain, A. Kumar and I. Samajdar: Mater. Charact., 2012, vol. 72, pp. 68–76.10.1016/j.matchar.2012.07.008 ↗
4. J. Gravier, V. Vignal and S. Bissey-Breton: Corros. Sci.,2012, vol. 61, pp. 162–170.10.1016/j.corsci.2012.04.032 ↗
5. G.T. Burstein and P.C. Pistorius: Corrosion., 1995, vol. 51, pp. 380–385.10.5006/1.3293603 ↗
6. T. Hong and M. Nagumo: Corros. Sci., 1997, vol. 39, pp. 1665–1672.10.1016/S0010-938X(97)00072-3 ↗
7. S. Ghosh and V. Kain: J. Nucl. Mater., 2010, vol. 403, pp. 62–67.10.1016/j.jnucmat.2010.05.028 ↗
8. G. Hinds, L. Wickström, K. Mingard and A. Turnbull: Corros. Sci., 2013, vol. 71, pp. 43–52.10.1016/j.corsci.2013.02.002 ↗
9. P.G. Benardos and G.-C. Vosniakos: Int. J. Mach. Tools Manuf., 2003, vol. 43, pp. 833–844.10.1016/S0890-6955(03)00059-2 ↗
10. S. Ghosh, V.P.S. Rana, V. Kain, V. Mittal and S.K. Baveja, Mater. Des., 2011, vol. 32, pp. 3823–3831.10.1016/j.matdes.2011.03.012 ↗
11. Y.K. Chou: J. Mater. Process. Technol., 2002, vol. 124, pp. 171–177.10.1016/S0924-0136(02)00132-2 ↗
12. J. Kuniya, I. Masaoka, R. Sasaki, S. Kirihara (1980) J. Mater. Energy. Syst. 1: 30–40.10.1007/BF02833359 ↗
13. S. Jeelani and J.A. Bailey: J. Eng. Mater. Technol., 1986, vol. 108, pp. 93–98.10.1115/1.3225865 ↗
14. D.Y. Jang, T.R. Watkins, K.J. Kozaczek, C.R. Hubbard and O.B. Cavin: Wear., 1996, vol. 194, pp. 168–173.10.1016/0043-1648(95)06838-4 ↗
15. V. García Navas, O. Gonzalo and I. Bengoetxea: Int. J. Mach. Tools Manuf., 2012, vol. 61, pp. 48–57.10.1016/j.ijmachtools.2012.05.008 ↗
16. M.C.Shaw: “Metal Cutting Principles”, second ed, Oxford University Press, New York, 2005.
17. Z. Wang, M. Rahman: “High speed machining” in: M.S.J. Hashmi (Ed.), Compr. Mater. Process., Elsevier, Ireland, 2014: pp. 221–253.
18. H.J. Engell: Electrochim. Acta., 1977, vol. 22, pp. 987–993.10.1016/0013-4686(77)85010-X ↗
19. K.E. Heusler: Corros. Sci., 1990, vol. 31, pp. 597–606.10.1016/0010-938X(90)90168-5 ↗
20. H.A. Sonawane and S.S. Joshi: J. Manuf. Sci. Technol., 2010, vol. 3, pp. 204–217.10.1016/j.cirpj.2010.11.003 ↗
21. D. Whitehouse: “Surfaces and Their Measurement”, first ed, Hermes Penton Science, London, 2002.
22. I.C. Noyan: Metall. Trans. A., 1983, vol. 14, pp. 249–258.10.1007/BF02651622 ↗
23. D. Kohli, R. Rakesh, V.P. Sinha, G.J. Prasad and I. Samajdar: J. Nucl. Mater., 2014, vol. 445, pp. 200–208.10.1016/j.jnucmat.2013.11.005 ↗
24. B.D. Cullity, S.R. Stock (2001) Elements of X-ray Diffraction. Prentice Hall, Upper Saddle River.
25. W.G. Golden (1985) Fourier Transform Infrared Reflection–Absorption Spectroscopy. Academic Press INC, Cambridge.10.1016/B978-0-12-254104-9.50014-6 ↗
26. M. Lin, A.B. Rasco, A.G. Cavinato, M.A. Holy (2009) In: DW Sun (Ed) Infrared Spectrosc Food Qual Anal Control. Elsevier Inc., Amsterdam, pp. 119–143.10.1016/B978-0-12-374136-3.00006-7 ↗
27. J.S. Gaffney, N.A. Marley, D.E. Jones (2012) Fourier transform infrared (FTIR) spectrscopy. In: EN Kaufmann (Ed) Charact. Mater. Wiley, New York, pp. 1104–1135.
28. N.T. McDevitt and W.L. Baun: Spectrochim. Acta., 1964, vol. 20, pp. 799–808.10.1016/0371-1951(64)80079-5 ↗
29. S.F. Corbin, D.M. Turriff (2012) Thermal diffusivity by the laser flash technique. In: EN Kaufmann (Ed) Charact. Mater. Wiley, New York, pp. 510–517.
30. M. Boutinguiza, F. Lusquiños, J. Pou, R. Soto, F. Quintero and R. Comesaña: Opt. Lasers Eng., 2012, vol. 50, pp. 727–730.10.1016/j.optlaseng.2011.11.016 ↗
31. K. Eluyaperumal, P.K. De and J. Balachandran: Corrosion., 1972, vol. 28, No. 7, pp. 269-273.10.5006/0010-9312-28.7.269 ↗
32. N. Srinivasan, V. Kain, N. Birbilis, B. Sunil Kumar, M.N. Gandhi and P. V Sivaprasad: Corr.Sci., 2016, vol. 111, pp. 404-413.10.1016/j.corsci.2016.05.027 ↗
33. M.G. Fontana (2005) Corrosion Engineering, Third edition, Tata Mcgraw Hill, Philadelphia.
34. R.A. Schwarzer, D.P. Field, B.L. Adams, M. Kumar, A.J. Schwartz (2009) Present state of electron backscatter diffraction and prospective developments. In: A.J. Schwartz, M. Kumar, B.L. Adams, D.P. Field (Eds) Electron Backscatter Diffraction in Materials Science. Springer Science + Business Media, New York, pp. 1–20.
35. S. Wright and B. Adams: Metall. Trans. A., 1992, vol. 23, pp. 759–767.10.1007/BF02675553 ↗
36. S.I. Wright, M.M. Nowell and D.P. Field: Microsc.Microanal., 2011, vol. 17, pp. 316–329.10.1017/S1431927611000055 ↗
37. L. Saraf: Microsc Microanal., 2011, vol. 17, pp. 424–425.10.1017/S1431927611002996 ↗
38. K.A. Al-Ghamdi and A. Iqbal: J. Clean. Prod., 2015, vol. 108, pp. 192–206.10.1016/j.jclepro.2015.05.132 ↗
39. C.H. Lauro, L.C. Brandao, D. Baldo, R.A. Reis and J.P. Davim: Measurement, 2014, vol. 58, pp. 73–86.10.1016/j.measurement.2014.08.035 ↗
40. G.T. Burstein and S.P. Mattin: Philos. Mag. Lett., 1992, vol. 66, pp. 127–131.10.1080/09500839208229274 ↗
41. G.T. Burstein, C. Liu, R.M. Souto and S.P. Vines: Corros. Eng. Sci. Technol., 2004, vol. 39, pp. 25–30.10.1179/147842204225016859 ↗
42. K.N. Lyon, T.J. Marrow and S.B. Lyon: J. Mater. Process. Technol., 2015, vol. 218, pp. 32–37.10.1016/j.jmatprotec.2014.11.038 ↗
43. P.E. Manning, D.J. Duquette and W.F. SAvage: Corrosion, 1979, vol. 35, pp. 151–157.10.5006/0010-9312-35.4.151 ↗
44. S Ghosh, V Kain (2010) Mater. Sci. Eng. A 527:679–68310.1016/j.msea.2009.08.039 ↗
45. D. Kuhlmann-Wilsdorf and N. Hansen: Scr. Metall. Mater., 1991, vol. 25, pp. 1557–1562.10.1016/0956-716X(91)90451-6 ↗
46. D.A. Hughes, N. Hansen and D.J. Bammann: Scr. Mater., 2003, vol. 48, pp. 147–153.10.1016/S1359-6462(02)00358-5 ↗
47. B. Verlinden, J. Driver, I. Samajdar and R.D. Doherty: “Thermo Mechanical Processing of Metallic Materials”, first ed., Pergamon Materials Series, Great Briton, 2007.
48. W. Pantleon: Scr. Mater., 2008, vol. 58, pp. 994–997.10.1016/j.scriptamat.2008.01.050 ↗
49. S.K. Shekhawat, R. Chakrabarty, V. Basavaraj, V.D. Hiwarkar, K. V. Mani and P.J. Guruprasad: Acta Mater., 2015, vol. 84, pp. 256–264.10.1016/j.actamat.2014.10.042 ↗
50. C.G. Rhodes and A.W. Thompson: Metall. Trans. A., 1977, vol. 8, pp. 1901–1906.10.1007/BF02646563 ↗