journal article·2018-04

Atom-Probe Tomographic Investigation of Austenite Stability and Carbide Precipitation in a TRIP-Assisted 10 Wt Pct Ni Steel and Its Weld Heat-Affected Zones

Divya Jain, David N. Seidman, Erin J. Barrick, John N. DuPont

Publisher page

Abstract

Newly developed low-carbon 10 wt pct Ni-Mo-Cr-V martensitic steels rely on the Ni-enriched, thermally stable austenite [formed via multistep intercritical Quench-Lamellarization-Tempering (QLT)-treatment] for their superior mechanical properties, specifically ballistic resistance. Critical to the thermal stability of austenite is its composition, which can be severely affected in the weld heat-affected zones (HAZs) and thus needs investigations. This article represents the first study of the nanoscale redistributions of C, Ni, and Mn in single-pass HAZ microstructures of QLT-treated 10 wt pct Ni steels. Local compositions of Ni-rich regions (representative of austenite compositions) in the HAZs are determined using site-specific 3-D atom-probe tomography (APT). Martensite-start temperatures are then calculated for these compositions, employing the Ghosh-Olson thermodynamic and kinetics approach. These calculations predict that austenite (present at high temperatures) in the HAZs is susceptible to a martensitic transformation upon cooling to room temperature, unlike the austenite in the QLT-treated base-metal. While C in the QLT-treated base-metal is consumed primarily in MC and M2C-type carbide precipitates (M is Mo, Cr, V), its higher concentration in the Ni-rich regions in the HAZs indicates the dissolution of carbide precipitates, particularly M2C carbide precipitates. The role of M2C carbide precipitates and austenite stability is discussed in relation to the increase in microhardness values observed in the HAZs, relative to the QLT-treated base-metal. Insights gained from this research on austenite stability and carbide precipitation in the single-pass HAZ microstructures will assist in designing multiple weld cycles for these novel 10 wt pct Ni steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. E.J. Czyryca, R.E. Link, R.J. Wong, D.A. Aylor, T.W. Montemarano, and J.P. Gudas: Nav. Eng. J., 1990, vol. 102, pp. 63-82.10.1111/j.1559-3584.1990.tb02632.x ↗
2. A.D. Wilson, E.G. Hamburg, D.J. Colvin, S.W. Thompson, and G. Krauss: Microalloyed HSLA Steels, Metals Park, OH, ASM International, 1988, pp. 259-75.
3. N.J. Wengrenovich and G.B. Olson: Materials Today: Proceedings, 2015, vol. 2, pp. S639-42.10.1016/j.matpr.2015.07.365 ↗
4. A. Saha, J. Jung, and G.B. Olson: J. Comput. Aided Mater. Des., 2007, vol. 14, pp. 201-33.10.1007/s10820-006-9032-y ↗
5. F. Latourte, Z. Feinberg, L.F. Mori, G.B. Olson, and H.D. Espinosa: Int. J. Fract, 2010, vol. 162, pp. 187-204.10.1007/s10704-010-9472-y ↗
6. X.J. Zhang: Mater. Sci. Technol., 2013, vol. 28, pp. 818-22.10.1179/1743284712Y.0000000015 ↗
7. M.D. Mulholland and D.N. Seidman: Acta Mater., 2011, vol. 59, pp. 1881-97.10.1016/j.actamat.2010.11.054 ↗
8. S. Vaynman, D. Isheim, R.P. Kolli, S.P. Bhat, D.N. Seidman, and M.E. Fine: Metall. Mater. Trans. A, 2008, vol. 39, pp. 363-73.10.1007/s11661-007-9417-x ↗
9. J.T. Bono, J.N. DuPont, D. Jain, S. Baik, and D.N. Seidman: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5158-5170.10.1007/s11661-015-3087-x ↗
10. G.B. Olson, J.F. Mescall, and M. Azrin: in Shock waves and High-Strain-Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, 1981.
11. J. Mescall and R. Papirno: Experimental Mechanics, 1974, vol. 14, pp. 257-266.10.1007/BF02322829 ↗
12. J.F. Mescall and H. Rogers: in Innovations in Ultrahigh Strength Steel Technology Proceedings of 34th Sagamore Army Materials Research Conference, G.B. Olson, M. Azrin and E.S. Wright, eds., US Army Materials Technology Laboratory, Watertown, MA, 1990.
13. M. E. Backman and W. Goldsmith: Int. J. Eng. Sci., 1978, vol. 16, pp. 1-99.10.1016/0020-7225(78)90002-2 ↗
14. G.B. Olson and M. Azrin: Metall. Trans. A, 1978, vol. 9, pp. 713-21.10.1007/BF02659928 ↗
15. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531-38.10.1016/0001-6160(53)90083-2 ↗
16. V.F. Zackay, E.R. Parker, D. Fahr, and R. Busch: ASM Trans Quart, 1967, vol. 60, pp. 252-59.
17. D. Jain, D. Isheim, X.J. Zhang, G. Ghosh, and D.N. Seidman: Metall. Mater. Trans. A, 2017, vol. 48, pp. 3642-3654.10.1007/s11661-017-4146-2 ↗
18. T.L. Anderson, J.A. Hyatt, and J.C. West: Weld. J, 1987, vol. 66, pp. 21-26.
19. B.A. Graville: in Proc. Int. Conf. on Welding of HSLA (Microalloyed) Structural Steels, A.B. Rothwell and J.M. Gray, eds., ASM International, Metals Park, OH, 1978.
20. J.I. Kim, H.J. Kim, and J.W. Morris: Metall. Trans. A, 1984, vol. 15, pp. 2213-19.10.1007/BF02647104 ↗
21. J.I. Kim and J.W. Morris: Metall. Trans. A, 1980, vol. 11, pp. 1401-06.10.1007/BF02653495 ↗
22. J.I. Kim and J.W. Morris: Metall. Trans. A, 1981, vol. 12, pp. 1957-63.10.1007/BF02643809 ↗
23. J.I. Kim, C.K. Syn, and J.W. Morris: Metall. Trans. A, 1983, vol. 14, pp. 93-103.10.1007/BF02643742 ↗
24. B. Fultz, J.I. Kim, Y.H. Kim, H.J. Kim, G.O. Fior, and J.W. Morris: Metall. Trans. A, 1985, vol. 16, pp. 2237-49.10.1007/BF02670423 ↗
25. B. Fultz, J.I. Kim, Y.H. Kim, and J.W. Morris: Metall. Trans. A, 1986, vol. 17, pp. 967-72.10.1007/BF02661262 ↗
26. B. Fultz and J.W. Morris: Metall. Trans. A, 1985, vol. 16, pp. 2251-56.10.1007/BF02670424 ↗
27. C.W. Marshall, R.F. Hehemann, and A.R. Troiano: Trans. ASM, 1962, vol. 55, p. 135.
28. J. W. Morris Jr: ISIJ international, 2011, vol. 51, pp. 1569-75.10.2355/isijinternational.51.1569 ↗
29. H.J. Kim, Y.H. Kim, and J.W. Morris Jr: ISIJ international, 1998, vol. 38, pp. 1277-85.10.2355/isijinternational.38.1277 ↗
30. J.M. Zhang, H. Li, F. Yang, Q. Chi, L.K. Ji, and Y.R. Feng: J. Mater. Eng. Perform, 2013, vol. 22, pp. 3867-71.10.1007/s11665-013-0701-1 ↗
31. Z. Liu, M. Wang, J. Chen, and G. Wang: Development and Applications of New Generation Ni-Containing Cryogenic Steels in PR China, Energy Materials 2017 Springer, Cham, 2017.10.1007/978-3-319-52333-0_37 ↗
32. D. Isheim, A.H. Hunter, X.J. Zhang, and D.N. Seidman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3046-59.10.1007/s11661-013-1670-6 ↗
33. R.W. Fonda and G. Spanos: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5982-89.10.1007/s11661-014-2588-3 ↗
34. J.I. Jang, J.B. Ju, B.W. Lee, D. Kwon, and W.S. Kim: Mater. Sci. Eng. A, 2003, vol. 340, pp. 68-79.10.1016/S0921-5093(02)00190-9 ↗
35. J.I. Jang, Y. Yang, W. Kim, and D. Kwon: in Advances in Cryogenic Engineering Materials, Springer, New York, 1998, pp. 41-48.10.1007/978-1-4757-9056-6_6 ↗
36. H.H. Wang, Q. Luo, X.L. Wan, L. Li, K.M. Wu, and R.D.K. Misra: Sci. Technol. Weld Join., 2017, 22, 157-65.10.1080/13621718.2016.1207288 ↗
37. J. Casanova, G. Sorger, P. Vilaca, and S.D. Brandi: in Proceedings of the 69th International Conference of the International Institute of Welding, Melbourne, Australia, 2016.
38. F. Niessen, M. Villa, J. Hald, and M.A.J. Somers: Mater. Des., 2017, vol. 116, pp. 8-15.10.1016/j.matdes.2016.11.076 ↗
39. D.N. Seidman: Annu. Rev. Mater. Res., 2007, vol. 37, pp. 127-58.10.1146/annurev.matsci.37.052506.084200 ↗
40. D.N. Seidman and K. Stiller: MRS Bull., 2009, vol. 34, pp. 717-24.10.1557/mrs2009.194 ↗
41. G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3361-70.10.1016/0956-7151(94)90468-5 ↗
42. G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3371-79.10.1016/0956-7151(94)90469-3 ↗
43. G. Ghosh and G.B. Olson: J. Phase Equilibria, 2001, vol. 22, pp. 199-207.10.1361/105497101770338653 ↗
44. M.K. Miller, K.F. Russell, and G.B. Thompson: Ultramicroscopy, 2005, vol. 102, pp. 287-98.10.1016/j.ultramic.2004.10.011 ↗
45. X. Yue, X. Feng, and J.C. Lippold: Mater. Sci. Eng. A, 2013, vol. 585, pp. 149-154.10.1016/j.msea.2013.07.064 ↗
46. Z.S. Yu, F. Sun, J.X. Zhang, H.Z. Wang, Y. Yuan, L. Zhao, and X. Liu: J. Alloys Compd., 2017, vol. 697, pp. 86-89.10.1016/j.jallcom.2016.11.327 ↗
47. D. Jain, D. Isheim, A.H. Hunter, and D.N. Seidman: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3860-72.10.1007/s11661-016-3569-5 ↗
48. P. Payson and C.H. Savage: Trans. ASM, 1944, vol. 33, pp. 261-80.
49. R.A. Grange and H.M. Stewart: Trans. AIME, 1946, vol. 167, pp. 467-501.
50. A.E. Nehrenberg: Trans. AIME, 1946, vol. 167, p. 494.
51. W. Steven and A.G. Haynes: J. Iron Steel Inst., 1956, vol. 183, pp. 349-59.
52. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-27.
53. C. Capdevila, F.G. Caballero, and C.G.D. Andrés: ISIJ international, 2002, vol. 42, pp. 894-902.10.2355/isijinternational.42.894 ↗
54. G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1905-14.
55. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties, 3rd ed., Elsevier, Amsterdam, 2006, p. 96.
56. E.F. Nippes and J.P. Balaguer: Weld J (Miami Fla), 1986, vol. 65, p. 237.
57. O.C. Hellman, J.A. Vandenbroucke, J. Rüsing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437-44.10.1007/S100050010051 ↗
58. K. Hirano, M. Cohen, and B.L. Averbach: Acta Metall., 1961, vol. 9, pp. 440-45.10.1016/0001-6160(61)90138-9 ↗
59. S.J. Rothman, L.J. Nowicki, and G.E. Murch: J. Phys. F, 1980, vol. 10, pp. 383-98.10.1088/0305-4608/10/3/009 ↗
60. R.P. Kolli and D.N. Seidman: Acta Mater., 2008, vol. 56, pp. 2073-88.10.1016/j.actamat.2007.12.044 ↗
61. B.A. Senior: Mater. Sci. Eng. A, 1988, vol. 103, pp. 263-271.10.1016/0025-5416(88)90516-2 ↗
62. K. Miyata, T. Kushida, T. Omura, and Y. Komizo: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1565-73.10.1007/s11661-003-0303-x ↗
63. H.F. Fischmeister, S. Karagöz, and H.O. Andren: Acta Metall., 1988, vol. 36, pp. 817-825.10.1016/0001-6160(88)90136-8 ↗
64. E. Cabrol, C. Bellot, P. Lamesle, D. Delagnes, and E. Povoden-Karadeniz: J. Alloys Compd., 2013, vol. 556, pp. 203-09.10.1016/j.jallcom.2012.12.119 ↗
65. M.M. Serna and J.L. Rossi: Materials Letters, 2009, vol. 63, pp. 691-693.10.1016/j.matlet.2008.11.035 ↗
66. J. Janovec, A. Vyrostkova, and M. Svoboda: Metall. Mater. Trans. A, 1994, vol. 25, pp. 267-75.10.1007/BF02647972 ↗
67. S. Karagöz, H.F. Fischmeister, H-O Andrén, and C. Guang-Jun: Metall. Mater. Trans. A, 1992, vol. 23, pp. 1631-40.10.1007/BF02804359 ↗
68. W. Rong, H-O Andrén, H. Wisell, and G.L. Dunlop: Acta Metall. Mater., 1992, vol. 40, pp. 1727-38.10.1016/0956-7151(92)90116-V ↗
69. J.H. Jang, C.H. Lee, Y.U. Heo, and D.W. Suh: Acta Mater., 2012, vol. 60, pp. 208-17.10.1016/j.actamat.2011.09.051 ↗
70. L.J. Cuddy and J.C. Raley: Metall. Trans. A, 1983, vol. 14A, pp. 1989-95.10.1007/BF02662366 ↗
71. T. Gladman: Proc. R. Soc. A, 1966, vol. 294, pp. 298-309.10.1098/rspa.1966.0208 ↗
72. M. Shome, D.S. Sarma, O.P. Gupta, and O.N. Mohanty: ISIJ Int., 2003, vol. 43, pp. 1431-37.10.2355/isijinternational.43.1431 ↗
73. G. Spanos, R.W. Fonda, R.A. Vandermeer, and A. Matuszeski: Metall. Mater. Trans. A, 1995, vol. 26, pp. 3277-93.10.1007/BF02669455 ↗
74. D.J. Dyson, S.R. Keown, D. Raynor, and J.A. Whiteman: Acta Metall., 1966, vol. 14, pp. 867-75.10.1016/0001-6160(66)90007-1 ↗
75. J.A. Liddle, G.D.W. Smith, and G.B. Olson: Le J. Phys. Colloques, 1986, vol. 47, pp. C7-223–31.10.1051/jphyscol:1986739 ↗
76. D. Raynor, J.A. Whiteman, and R.W.K. Honeycombe: J. Iron Steel Inst., 1966, vol. 204, pp. 1114-16.
77. G.B. Olson, T.J. Kinkus, and J.S. Montgomery: Surf. Sci., 1991, vol. 246, pp. 238-45.10.1016/0039-6028(91)90421-N ↗
78. K. Stiller, L.E. Svensson, P.R. Howell, W. Rong, H.O. Andren, and G.L. Dunlop: Acta Metall., 1984, vol. 32, pp. 1457-67.10.1016/0001-6160(84)90092-0 ↗
79. D. Jain, D. Isheim, and D.N. Seidman: Metall. Mater. Trans. A, 2017, vol. 48, pp. 3205–19.10.1007/s11661-017-4129-3 ↗
80. F. Vurpillot, A. Bostel, and D. Blavette: Appl. Phys. Lett., 2000, vol. 76, pp. 3127-29.10.1063/1.126545 ↗
81. M.D. Mulholland and D.N. Seidman: Microscopy and Microanalysis, 2011, vol. 17, pp. 950-962.10.1017/S1431927611011895 ↗
82. R. Rementeria, J.D. Poplawsky, M.M. Aranda, W. Guo, J.A. Jimenez, C. Garcia-Mateo, and F.G. Caballero: Acta Mater., 2017, vol. 125, pp. 359-68.10.1016/j.actamat.2016.12.013 ↗
83. K.R. Williams and B. Wilshire: Mater. Sci. Eng., 1981, vol. 47, pp. 151-60.10.1016/0025-5416(81)90221-4 ↗
84. M.C. Murphy and G.D. Branch: J. Iron Steel Inst., 1969, vol. 207, pp. 1347-64.
85. G. Krauss: Mater. Sci. Eng. A, 1999, vol. 273, pp. 40-57.10.1016/S0921-5093(99)00288-9 ↗
86. J.H. Chen, Y. Kikuta, T. Araki, M. Yoneda, and Y. Matsuda: Acta Metall., 1984, vol. 32, pp. 1779-88.10.1016/0001-6160(84)90234-7 ↗
87. X. Yu, J.L. Caron, S.S. Babu, J.C. Lippold, D. Isheim, and D.N. Seidman: Acta Mater., 2010, vol. 58, pp. 5596-5609.10.1016/j.actamat.2010.06.031 ↗