Effect of Heat Treatment on Commercial AlSi12Cu1(Fe) and AlSi12(b) Aluminum Alloy Die Castings
Source abstract
Abstract
High-pressure die castings (HPDCs) cannot normally be heat-treated at a high temperature because of the presence of inner air/gas- or shrinkage-porosity that may lead to the formation of undesired surface blisters. In this paper, an unconventional heat treatment is proposed. Two secondary Al-Si alloys, AlSi12(b) and AlSi12Cu1(Fe), were stabilization heat-treated at 624 K (350 °C) with soaking times ranging from 1 to 8 hours. Enhancement of both static and dynamic mechanical properties was found to be related to the fragmentation of interconnected eutectic Si particles and the smoothing of coarser crystals. Increased ductility after heat treatment was correlated with a decrease in hardness and Si particle roundness. The formation of Si precipitates within the α-Al matrix was also observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. H.J. Buchner and J. Glossner: Proceeding of the 13th International Foundry Trade Fair, Dusseldorf (2015), pp. 1–31.
2. F. Bonollo, J. Urban, B. Bonatto and M. Botter: Metall. Ital., 2005, Vol. 6, pp. 23-32.
3. W.A. Butler, G. Timelli, E. Battaglia and F. Bonollo: Reference Module in Materials Science and Materials Engineering, Elsevier, 2016, pp. 1–10.
4. J. Campbell: Castings, 2nd edition., Butterworth Heinemann, Oxford (UK), 2003, pp. 1-335.10.1016/B978-075064790-8/50018-8 ↗
5. F. Bonollo, N. Gramegna and G. Timelli (2015) JOM, 67 (5), 901-908.10.1007/s11837-015-1333-8 ↗
6. E. Fiorese, F. Bonollo, G. Timelli, L. Arnberg and E. Gariboldi: Int. J. Met., 2015, Vol. 9 (1), pp. 55-66.
7. R.N. Lumley, R.G. O’Donnell, D.R. Gunasegaram and M. Givod: Metall. Mater. Trans. A, 2007, Vol. 38, pp. 2564-2574.10.1007/s11661-007-9285-4 ↗
8. G. Timelli and F. Bonollo: Mater. Sci. Eng. A, 2010, Vol. 528, pp. 273-282.10.1016/j.msea.2010.08.079 ↗
9. E. Battaglia, F. Bonollo, G. Timelli, E. Fiorese and G. Kral: Adv. Mater. Process. Tech., 2016, Vol. 698, pp. 1-14.
10. E.J. Vinarcik and J. Wiley: High Integrity Die Casting Processes, John Wiley & Sons Inc., Hoboken NJ, 2003, pp. 1-223.
11. R.N. Lumley, D.R. Gunasegaram, M. Gershenzon and R.G. O’Donnell: Int. Heat Tret. Surf. Eng., 2010, Vol. 4, pp. 25-32.10.1179/174951409X12542264514004 ↗
12. R.N. Lumley, I.J. Polmer and P.R. Curtis: Metall. Mater. Trans. A, 2009, Vol. 40, pp. 1716-1726.10.1007/s11661-009-9836-y ↗
13. Q. Wang: Metall. Mater. Trans. A, 2003, Vol. 34, pp. 2887-2899.10.1007/s11661-003-0189-7 ↗
14. M.F. Ibrahim, E.M. Elgallad, S. Valtierra, H.W. Doty and F.H. Samuel: Materials, 2016, Vol. 9, pp. 1-17.10.3390/ma9020078 ↗
15. R. Chen, Q. Xu, Z. Jia and B. Liu: Mater. Des., 2016, Vol. 90, pp. 1059-1068.10.1016/j.matdes.2015.11.069 ↗
16. R. Hu, T. Ogura, H. Tezuka, T. Sato and Q. Liu: J. Mater. Sci. Technol., 2010, Vol. 26, pp. 237-243.10.1016/S1005-0302(10)60040-0 ↗
17. Y.J. Li and L. Arnberg: Acta Mater., 2003, Vol. 51, pp. 3415-3428.10.1016/S1359-6454(03)00160-5 ↗
18. European Standard EN 1706, Aluminium and aluminium alloys—Castings—Chemical composition and mechanical properties, CEN-CENELEC, Brussels, 2010.
19. E. Battaglia, F. Bonollo and P. Ferro: Metall. Mater. Trans. A, 2017, Vol. 48, pp. 2574-2583.10.1007/s11661-017-4038-5 ↗
20. R. Zambelli, P. Parona, F. Bonollo, E. Battaglia: La Metallurgia Italiana, 2016, Vol. 108, pp.157-160.
21. ASTM B557M-15: Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium- Alloy Products (Metric), 2015.
22. G. Timelli, A. Fabrizi, S. Capuzzi, F. Bonollo and S. Ferraro: Mater. Sci. Eng. A, 2014, Vol. 603, pp. 58-68.10.1016/j.msea.2014.02.071 ↗
23. E. Battaglia, F. Bonollo, P. Ferro, A. Cenghialta and G. Mazzacavallo: Metall. Ital., 2016, Vol. 108, pp. 61-64.
24. S. Ferraro, A. Fabrizi and G. Timelli: Mater. Chem. Phys., 2015, Vol. 153, pp. 168-179.10.1016/j.matchemphys.2014.12.050 ↗
25. H. Zhu, X. Zhang, M.J. Couper and A.K. Dahle: Mater. Chem. Phys., 2009, Vol. 113, pp. 401-406.10.1016/j.matchemphys.2008.07.109 ↗
26. C. Yang, S. Lee, C. Lee and J. Lin: Mater. Chem. Phys., 2005, Vol. 93, pp. 412-419.10.1016/j.matchemphys.2005.03.029 ↗
27. S. Ji, W. Yang, F. Gao, D. Watson and Z. Fan: Mater. Sci Eng. A, 2013, Vol. 564, pp. 130-139.10.1016/j.msea.2012.11.095 ↗
28. K. Domkin, J.H. Hattel and J. Thorborg: J. Mater. Process. Technol., 2009, Vol. 209, pp. 4051-4061.10.1016/j.jmatprotec.2008.09.031 ↗
29. S. Shankar and D. Apelian: Metall. Mater. Trans. B, 2002, Vol. 33, pp. 465-476.10.1007/s11663-002-0057-7 ↗
30. L. Pedersen and L. Arnberg: Metall. Mater. Trans. A, 2001, Vol. 32, pp. 525-532.10.1007/s11661-001-0069-y ↗
31. A. Darlapudi, S.D. McDonald, S. Terzi, A. Prasad, M. Felberbaum, D.H. StJohn:J. of Crystal Growth, 2016, Vol. 433, pp. 63-73.10.1016/j.jcrysgro.2015.10.002 ↗
32. A. Manente, G. Timelli: Recent trends in processing and degradation of aluminum alloys, www.intechopen.com.
33. Greenwood G.W.: Acta Metallurgica, 1956, Vol. 4, pp. 243-248.10.1016/0001-6160(56)90060-8 ↗
34. Q. Du, W.J. Poole, M.A. Wells and N.C. Parson: Acta Mater, 2013, Vol. 61, pp. 4961-4973.10.1016/j.actamat.2013.04.050 ↗
35. A.W.F. Muggerud, E.A. Mortsell, Y. Li and R. Holmestad: Mater. Sci. Eng. A, 2013, Vol. 567, pp. 21-28.10.1016/j.msea.2013.01.004 ↗
36. D. Porter, K.E. Earsterling and M. Sherif: Phase Transformations in Metals and Alloys, 3rd Edit., Taylor & Francis Group, Abingdon (UK), 2009.