journal article·2017-11

Comparison of SPS Processing Behavior between As Atomized and Cryomilled Aluminum Alloy 5083 Powder

Frank Kellogg, Brandon McWilliams, Jennifer Sietins, Anit Giri, Kyu Cho

Publisher page

Abstract

Aluminum 5083 powder, both as atomized and cryomilled, was consolidated via spark plasma sintering (SPS). This study quantified and compared the effects of heating an aluminum alloy powder directly through Joule heating vs indirectly through thermal conduction from the die during SPS processing. When consolidated under the same processing conditions, the cryomilled powders showed faster heating rates and densification than the as atomized powder. It was also possible to process the cryomilled powder in a non-conductive die but not the as atomized powder. This could be ascribed to an improvement in electrical conductivity of the powder due to the break up and redistribution of surface oxides after cryomilling. The changes in behavior as a result of cryomilling and/or changing die material led to samples with different fracture morphologies and increased hardness values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. D. Witkin and E. Lavernia: Prog. Mater. Sci., 2006, vol. 51, pp. 1-6010.1016/j.pmatsci.2005.04.004 ↗
2. C. Hofmeister, B. Yao, Y. Sohn, T. Delahanty, M. Van den Bergh, and K. Cho: J. Mater. Sci., 2010, vol. 45, pp.4871-487610.1007/s10853-010-4571-8 ↗
3. R. Vogt, Z. Zhang, T. Topping, E. Lavernia, and J. Schoenung: J. Mater. Process. Technol., 2009, vol. 209, pp. 5046-505310.1016/j.jmatprotec.2009.02.002 ↗
4. Y Li, W Liu, V Ortalan, W Li, Z Zhang, R Vogt, N Browning, E Lavernia, and J Schoenung: Acta Mater., 2010, vol. 58, pp., 1732-174010.1016/j.actamat.2009.11.015 ↗
5. R. Duan, G. Zhan, J. Kuntz, B. Kear, and A. Mukherjee: Mater. Sci. Eng. A, 2004, vol. 373, pp. 180-18610.1016/j.msea.2004.01.006 ↗
6. Z. Zhang, F. Wang, S. Lee, Y. Liu, J. Cheng, and Y. Liang: Mater. Sci. Eng. A, 2009, vol.523, pp. 134-13810.1016/j.msea.2009.07.016 ↗
7. C. Shearwood, Y. Fu, L. Yu, and K. Khor: Scr. Mater., 2005, vol. 52, pp. 455-46010.1016/j.scriptamat.2004.11.010 ↗
8. G. Kim, D. Shin, Y. Seo, and Y. Kim: Mater. Charact., 2008, vol. 59, pp. 1201-120510.1016/j.matchar.2007.09.014 ↗
9. R. Kumar, K. Prakash, P. Cheang, and K. Khor: Acta Mater., 2005, vol. 53, pp. 2327-233510.1016/j.actamat.2005.01.039 ↗
10. Z. Munir, U. Anselmi-Tamburini, and M. Ohyanagi: J. Mater. Sci., 2006, vol. 41, pp. 763-77710.1007/s10853-006-6555-2 ↗
11. D. Hulbert, A. Anders, J. Andersson, E. Lavernia, and A. Mukherjee: Scr. Mater., 2009, vol. 60, pp. 835-83810.1016/j.scriptamat.2008.12.059 ↗
12. E. Olevsky, and L. Froyen: Scr. Mater., 2006, vol. 55, pp. 1175-117810.1016/j.scriptamat.2006.07.009 ↗
13. L. Stanciu, V. Kodash, and J. Groza: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2633-263810.1007/s11661-001-0053-6 ↗
14. M. Omori: Mater. Sci. Eng. A, 2000, vol. 287, pp. 83-18810.1016/S0921-5093(00)00773-5 ↗
15. W. Chen, U. Anselmi-Tamburini., J. Garay, J. Groza, and Z. Munir: Mater. Sci. Eng. A, 2005, vol. 394, pp. 132-13810.1016/j.msea.2004.11.020 ↗
16. U. Anselmi-Tamburini, S. Gennari, J. Garay, and Z. Munir: Mater. Sci. Eng. A, 2005, vol. 394, pp. 139-14810.1016/j.msea.2004.11.019 ↗
17. U. Anselmi-Tamburini, J. Garay, and Z. Munir: Mater. Sci. Eng. A, 2005, vol. 407, pp. 24-3010.1016/j.msea.2005.06.066 ↗
18. H. Conrad, H: Mater. Sci. Eng. A, 2000, vol. 287, pp. 227-23710.1016/S0921-5093(00)00780-2 ↗
19. J. Garay, U. Anselmi-Tamburini, and Z. Munir, Z: Acta.Mater., 2003, vol. 51, pp. 4487-449510.1016/S1359-6454(03)00284-2 ↗
20. J. Friedman, J. Garay, U. Anselmi-Tamburini, and Z. Munir: Intermetallics, 2004, vol. 12, pp. 589-59710.1016/j.intermet.2004.02.005 ↗
21. J. Ye, L. Ajdelsztajn, L., and J. Schoenung: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2569-2579.10.1007/BF02586229 ↗
22. D. Liu, Y. Xiong, T. Topping, Y. Zhou, C. Haines, J. Paras, D. Martin, D. Kapoor, J. Schoenung, and E. Lavernia: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 340-350.10.1007/s11661-011-0841-6 ↗
23. F. Kellogg, B. McWilliams, and K. Cho: Metall. Mater. Trans. A, 2016, vol. 47. pp. 6353-6367.10.1007/s11661-016-3803-1 ↗
24. B. McWilliams, J. Yu, and A. Zavaliangos: J. Mater. Sci., 2015, vol. 50, pp. 519-530.10.1007/s10853-014-8463-1 ↗
25. A. Zavaliangos, J. Zhang, M. Krammer, and J. Groza: Mater. Sci. Eng. A, 2004, vol. 379, pp. 218-228.10.1016/j.msea.2004.01.052 ↗
26. D. Balzar: J. Res. Natl. Inst. Stand. Technol., 1993, vol. 98, pp. 321-353.10.6028/jres.098.026 ↗
27. Z. Zhang, F. Zhou, and E. Lavernia: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1349-1355.10.1007/s11661-003-0246-2 ↗
28. G. Dorofeev, A. Streletskii, I. Povstugar, A. Protasov, and E. Elsukov: Colloid J., 2012, vol. 74, pp. 675-685.10.1134/S1061933X12060051 ↗
29. Y. Xiong, D. Liu, Y. Li, B. Zheng, C. Haines, J. Paras, D. Martin, D. Kapoor, E. Lavernia, and J. Schoenung: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 327-339.10.1007/s11661-011-0933-3 ↗
30. G. Lucadamo, N. Yang, C. Marchi, and E. Lavernia: Mater. Sci. Eng. A, 2006, vol. 430, pp. 230-241.10.1016/j.msea.2006.05.039 ↗