journal article·2017-06Open access

Isothermal and Cyclic Aging of 310S Austenitic Stainless Steel

Coralie Parrens, Jacques Lacaze, Benoit Malard, Jean-Luc Dupain, Dominique Poquillon

Publisher page

Abstract

Unusual damage and high creep strain rates have been observed on components made of 310S stainless steel subjected to thermal cycles between room temperature and 1143 K (870 °C). Microstructural characterization of such components after service evidenced high contents in sigma phase which formed first from δ-ferrite and then from γ-austenite. To get some insight into this microstructural evolution, isothermal and cyclic aging of 310S stainless steel has been studied experimentally and discussed on the basis of numerical simulations. The higher contents of sigma phase observed after cyclic agings than after isothermal treatments are clearly associated with nucleation triggered by thermal cycling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. E.O. Hall, and S.H. Algie: Metall. Rev., 1966, vol. 11, No. 1, pp. 61-88.10.1179/imr.1966.11.1.61 ↗
2. A. Perron, C. Toffolon-Masclet, X. Ledoux, F. Buy, T. Guilbert, S. Urvoy, S. Bosonnet, B. Marini, F. Cortial, and G. Texier: Acta Materialia, 2014, vol. 79, pp. 16-29.10.1016/j.actamat.2014.06.066 ↗
3. M.H. Lewis: Acta Metall., 1966, vol. 14, pp. 1421–1428.10.1016/0001-6160(66)90162-3 ↗
4. L.K. Singhal and J.W. Martin: Acta Metallurgica, 1968, vol. 16, pp. 1441-1451.10.1016/0001-6160(68)90039-4 ↗
5. H. Sieurin and R. Sandström: Materials Science and Engineering A, 2007, vol. 444, pp. 271-276.10.1016/j.msea.2006.08.107 ↗
6. M.H. Lewis and B. Hattersley: Acta Metallurgica, 1965, vol. 13, pp. 1159-1168.10.1016/0001-6160(65)90053-2 ↗
7. C.C. Tseng, Y. Shen, S.W. Thompson, M.C. Mataya, and G. Krauss: Metallurgical and Materials Transactions A, 1994, vol. 25A, pp. 1147-1158.10.1007/BF02652290 ↗
8. M. Pohl, O. Storz, and T. Glogowski: Materials Characterization, 2007, vol. 58, pp. 65-71.10.1016/j.matchar.2006.03.015 ↗
9. A.A. Guimaraes and P.R. Mei: Journal of Materials Processing Technology, 2004, vol. 155-156, pp. 1681-1689.10.1016/j.jmatprotec.2004.04.341 ↗
10. I.M. Wolff, K. Premachandra, and M.B. Cortie: Mater. Charact., 1992, vol. 28, No. 2, pp. 139-48.10.1016/1044-5803(92)90037-I ↗
11. J. Brozda and J. Madej: Engineering Failure Analysis, 2008, vol. 15, pp. 368-377.10.1016/j.engfailanal.2007.01.017 ↗
12. J.M. Pardal, S.S. Carvalho, C. Barbosa, T.R. Montenegro, and S.S.M. Tavares: Engineering Failure Analysis, 2011, vol. 18, pp. 1435-1444.10.1016/j.engfailanal.2011.04.005 ↗
13. A.F. Padilha, and P.R. Rios: Iron Steel Inst. Jpn., 2002, vol. 42, No. 4, pp. 325-37.10.2355/isijinternational.42.325 ↗
14. J.M. Vitek, and S.A. David: Weld. Res. Suppl., 1986, pp. 106-14.
15. D.M.E. Villanueva, F.C.P. Junior, R. L.Plaut, and A.F. Padilha: Mater. Sci. Technol., 2006, vol. 22, No. 9, pp. 1098-1104.10.1179/174328406X109230 ↗
16. C.C. Hsieh, and W. Wu: Int. Sch. Res. Not., 2012, vol. Metallurgy, p. 16.10.5402/2012/732471 ↗
17. J. Barcik: Metall. Mater. Trans. A, 1983, vol. 14A, No. 4, pp. 635-41.10.1007/BF02643779 ↗
18. C.C. Hsieh, D.Y. Lin, and W. Wu: Mater. Sci. Eng. A, 2007, vol. 467, No. 1–2, pp. 181-89.10.1016/j.msea.2007.02.107 ↗
19. M. Schwind, J. Kallqvist, J.O. Nilsson, J. Ǻgren, and H.O. Andren: Acta Materialia, 2000, vol. 48, pp. 2473-2481.10.1016/S1359-6454(00)00069-0 ↗
20. W.E. White and I.L. May: Metallography, 1970, vol. 3, pp. 51-60.10.1016/0026-0800(70)90004-2 ↗
21. T. Sourmail: Materials Science and Technology, 2001, vol. 17, pp. 1-14.10.1179/026708301101508972 ↗
22. J. Barcik: Mater. Sci. Technol., 1988, vol. 4, No. 1, pp. 5-15.10.1179/mst.1988.4.1.5 ↗
23. R.J. Gray, V.K. Sikka, and R.T. King: J. Mater., 1978, vol. 30, No. 11, pp. 18-26.
24. F.R. Beckitt: J. Iron Steel Inst., 1969, vol. 207, No. 5, pp. 632-38.
25. W.E. White and I.L. May: Metallography, 1970, vol. 3, pp. 35-50.10.1016/0026-0800(70)90003-0 ↗
26. L.F. Li, P. Caenen, and J.P. Celis: Corros. Sci., 2008, vol. 50, No. 3, pp. 804-10.10.1016/j.corsci.2007.09.006 ↗
27. D. Henriet and P. Didier: U.S. Patent No 5164016 A, 1992.
28. F. Hairer, A. Karelova, C. Krempaszky, E. Werner, T. Hebesberger, and A. Pichler: 2008. http://www.mtf.stuba.sk/docs/internetovy_casopis/2008/4mimorc/hairer.pdf. Accessed 17 May 2016.
29. G.F.V. Voort, E.P. Manilova, J.R. Michael, and G.M. Lucas: Microsc. Microanal., 2004, vol. 10, No. 2, pp. 1-6.
30. T.J. Collins: Biotechniques, 2007, vol. 43, 1 Suppl, pp. 25-30.10.2144/000112517 ↗
31. M.D. Abramoff, P.J. Magalhaes, and S.J. Ram: 1997.
32. A.V. Kington and F.W. Noble: Materials Science and Engineering A, 1991, vol. 138, pp. 259-266.10.1016/0921-5093(91)90695-J ↗
33. V.G. Rivlin, and G.V. Raynor: Int. Met. Rev., 1980, vol. 25, No. 1, pp. 21-40.10.1179/095066080790136172 ↗
34. A.V. Kington, and F.W. Noble: Mater. Sci. Technol., 1995, vol. 11, No. 3, pp. 268-75.10.1179/mst.1995.11.3.268 ↗
35. H.M. Rietveld: Journal of Applied Crystallography, 1969, vol. 2, pp. 65-71.10.1107/S0021889869006558 ↗
36. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, No. 2, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
37. Thermo-Calc: TCFE8-TCS Steels/Fe-Alloys Database v8.0, 2015.
38. J.I. Morley, and H.W. Kirkby: J. Iron Steel Inst., 1952, vol. 172, No. 2, p. 129.
39. T. Sourmail, and H.K.D.H. Bhadeshia: Calphad, 2003, vol. 27, No. 2, pp. 169-75.10.1016/j.calphad.2003.08.002 ↗
40. R. Magnabosco: Mater. Res., 2009, vol. 12, No. 3, pp. 321-27.10.1590/S1516-14392009000300012 ↗
41. B.F.O. Costa, J. Cieslak, and S.M. Dubiel: Materials Chemistry and Physics, 2013, vol. 143, pp. 19-25.10.1016/j.matchemphys.2013.07.020 ↗
42. J. Cieslak, B.F.O. Costa, S.M. Dubiel, D. Fruchart, and N.E. Skryabina: Journal of Alloys and Compounds, 2009, vol. 467, pp. 182-186.10.1016/j.jallcom.2007.11.149 ↗
43. M. Avrami: J. Chem. Phys., 1939, vol. 7, No. 12, pp. 1103-12.10.1063/1.1750380 ↗
44. M. Avrami: J. Chem. Phys., 1940, vol. 8, No. 2, pp. 212-24.10.1063/1.1750631 ↗
45. M. Avrami: J. Chem. Phys., 1941, vol. 9, No. 2, pp. 177-84.10.1063/1.1750872 ↗
46. B. Weiss, and R. Stickler: Metall. Trans., 1972, No. 4, vol. 3, pp. 851-66.10.1007/BF02647659 ↗
47. D.M.E. Villanueva, F.C.P. Junior, R.L. Plaut, and A.F. Padilha: Mater. Sci. Technol., 2006, vol. 22, No. 9, pp. 1098-1104.10.1179/174328406X109230 ↗
48. R. Sandström, M. Farooq, and M. Lundberg: Mater. High Temp., 2014, vol. 1, No. 29, pp. 8-16.
49. M. Coster, and J.-L. Chermant: Précis d’analyse d’images. Presses du CNRS. 1985.
50. G. Engberg, M. Hillert, and A. Odén: Scand. J. Metall., 1975, vol. 4, No. 2, pp. 93-96.
51. Thermo-Calc: MOB (Mobility) solution Database v. 2.0, Stockholm, Sweden, 1999.