Formation of an Intermediate Layer Between Grains in Nickel-Based Superalloy Turbine Blades
Source abstract
Abstract
Abstract The boundary region formed on the surface of nickel-based single-crystal turbine blades was investigated by high-resolution microscopy observation. There was a distinguishable intermediate layer with the size of about 2 to 5 μm between the matrix and surface defect grains such as stray grains, multiple grains, freckle grains, and even low-angle grain boundaries which were formed during the solidification of turbine blades. The intermediate layer was composed of many elongated γ′ as well as γ phases. In addition, only one side of the intermediate layer was coherent to the matrix grain or defect grain due to good orientation match. At the coherent interface, the γ′ (as well as γ) phase started to extend from the parent grain and coincidently, rhenium-rich particles were detected. Furthermore, the particles existed within both elongated gamma prime and gamma phases, and even at their boundary. Based on experimental observations, the formation mechanism of this intermediate layer was discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · nanoparticles nucleation surface interactions · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. M. Durand-Charre, The Microstructure of Superalloys (OPA, Amsterdam, 1997), pp. 1–14
2. Y. Bar-Cohen, High Temperature Materials and Mechanisms (CRC Press, New York, 2014), pp. 41–4310.1201/b16545 ↗
3. B. Geddes, H. Leon, X. Huang, Superalloys: Alloying and Performance (ASM International, Materials Park, 2010), pp. 1–1510.31399/asm.tb.sap.9781627083133 ↗
4. R.C. Reed, The Superalloys: Fundamentals and Applications (Cambridge University Press, Cambridge, 2006), pp. 1–21110.1017/CBO9780511541285 ↗
5. J. Rüsing, N. Wanderka, U. Czubayko, V. Naundorf, D. Mukherji, J. Rösler, Scr. Mater. 46, 235–40 (2002)10.1016/S1359-6462(01)01231-3 ↗
6. N. Wanderka, U. Glatzel, Mater. Sci. Eng. A 203, 69–74 (1995)10.1016/0921-5093(95)09825-9 ↗
7. A. Mottura, R.T. Wu, M.W. Finnis, R.C. Reed, Acta Mater. 56, 2669–75 (2008)10.1016/j.actamat.2008.01.032 ↗
8. A. Mottura, N. Warnken, M.K. Miller, M.W. Finnis, R.C. Reed, Acta Mater. 58, 931–42 (2010)10.1016/j.actamat.2009.10.008 ↗
9. K. Kim, P. Withey, W.D. Griffiths, Metall. Mater. Trans. A 46, 1024–29 (2015)10.1007/s11661-014-2709-z ↗
10. W.S. Walston, J.C. Schaeffer, W.H. Murphy, Superalloys 1996 (Minerals, Metals & Materials Soc, Warrendale, 1996), pp. 9–18
11. G.L. Erickson, Superalloys 1996 (Minerals, Metals & Materials Soc, Warrendale, 1996), pp. 35–44
12. R.W. Broomfield, D.A. Ford, H.K. Bhangu, M.C. Thomas, D.J. Frasier, P.S. Burkholder, K. Harris, G.L. Erickson, J.B. Wahl, J. Eng. Gas Turb. Power 120, 595–608 (1998)10.1115/1.2818188 ↗
13. T. Grosdidier, A. Hazotte, A. Simon, Mater. Sci. Eng. A 256, 183–96 (1998)10.1016/S0921-5093(98)00795-3 ↗
14. K. Kim, M. Watanabe, J. Kawakita, S. Kuroda, Scr. Mater. 59, 768–71 (2008)10.1016/j.scriptamat.2008.06.020 ↗
15. K. Kim, Metall. Mater. Trans. A 45, 3650–60 (2014)10.1007/s11661-014-2270-9 ↗
16. Energy table for EDS analysis (JEOL, 2013), http://www.jeol.co.jp. Accessed 28 Sept 2013.
17. P.J. Warren, A. Cerezo, G.D.W. Smith, Mater. Sci. Eng. A 250, 88–92 (1998)10.1016/S0921-5093(98)00541-3 ↗
18. J.P. Gu, C. Beckermann, A.F. Giamei, Metall. Mater. Trans. A 28, 1533–42 (1997)10.1007/s11661-997-0215-2 ↗
19. N. Stanford, A. Djakovic, B.A. Shollock, M. McLean, N. D’Souza, P.A. Jennings, Scr. Mater. 50, 159–63 (2004)10.1016/j.scriptamat.2003.08.029 ↗
20. Z.D. Long, W.H. Yang, K.M. Chang, Superalloys 718, 625, 706 and Various Derivatives (Minerals, Metals & Materials Soc, Warrendale, 2001), pp. 745–5410.7449/2001/Superalloys_2001_745_754 ↗
21. J.W. Aveson, P.A. Tennant, B.J. Foss, B.A. Shollock, H.J. Stone, N. D’Souza, Acta Mater. 61, 5162–71 (2013)10.1016/j.actamat.2013.04.071 ↗
22. J.D. Nystrom, T.M. Pollock, W.H. Murphy, A. Garg, Metall. Mater. Trans. A 28, 2443–52 (1997)10.1007/s11661-997-0001-1 ↗
23. A.C. Yeh, S. Tin, Metall. Mater. Trans. A 37, 2621–31 (2006)10.1007/BF02586097 ↗
24. R.B. Scarlin, Scr. Metall. 10, 711–15 (1976)10.1016/0036-9748(76)90348-3 ↗
25. D.A. Porter, K.E. Eastering, M.Y. Sherif, Phase Transformations in Metals and Alloys, 2nd edn. (CRC Press, Boca Raton, 2009), pp. 322–25
26. R. Burgel, P.D. Portella, J. Preuhs, Superalloys 2000 (Minerals Metals & Materials Soc, Warrendale, 2000), pp. 229–3810.7449/2000/Superalloys_2000_229_238 ↗
27. B. Zhang, X.-G. Cao, D.-L. Liu, X.-L. Liu, Trans. Nonfer. Metals Soc. China 23, 1286–92 (2013)10.1016/S1003-6326(13)62595-9 ↗
28. J. Meng, T. Jin, X.-F. Sun, Z.-Q. Hu, Int. J. Miner. Metall. Mater. 18, 197–202 (2011)10.1007/s12613-011-0422-0 ↗
29. L.-C. Zhuo, M. Huang, J.-C. Xiong, J.-R. Li, J. Zhu, Acta Metall. Sin. 28, 72–76 (2014)10.1007/s40195-014-0169-5 ↗
30. X. Jichun, L. Jiarong, L. Shizhong, Chine. J. Aerona. 23, 478–85 (2010)10.1016/S1000-9361(09)60244-2 ↗
31. A. Porter, B. Ralph, J. Mater. Sci. 16, 707–13 (1981)10.1007/BF02402788 ↗
32. A.J. Porter, B. Ralph, Mater. Sci. Eng. 59, 69–78 (1983)10.1016/0025-5416(83)90089-7 ↗
33. K. Nogita, S.D. McDonald, K. Tsujimoto, K. Yasuda, A.K. Dahle, J. Electron Microsc. 53, 361–69 (2004)10.1093/jmicro/dfh048 ↗
34. H.S. Dai, X.F. Liu, Mater. Sci. Tech. 25, 1183–88 (2009)10.1179/174328408X382235 ↗
35. B. Bramfitt, Metall. Trans. 1, 1987–95 (1970)10.1007/BF02642799 ↗
36. R. Schweinfest, S. Köstlmeier, F. Ernst, C. Elsäser, T. Wagner, M.W. Finnis, Philos. Mag. A 81, 927–55 (2001)10.1080/01418610151133375 ↗
37. J.A. Dantzig, M. Rappaz, Solidification (CRC Press, Boca Raton, 2009), pp. 261–7510.1201/9781439808030 ↗
38. K. Kim, Metall. Mater. Trans. A 45, 4538–48 (2014)10.1007/s11661-014-2414-y ↗
39. L. Zhuo, M. Huang, F. Wang, J. Xiong, J. Li, J. Zhu, Mater. Lett. 139, 232–36 (2015)10.1016/j.matlet.2014.10.075 ↗
40. E.A. Brener, D.E. Temkin, Acta Mater. 51, 797–803 (2003)10.1016/S1359-6454(02)00471-8 ↗
41. I. Manna, S.K. Pabi, W. Gust, Int. Mater. Rev. 46, 53–91 (2001)10.1179/095066001101528402 ↗
42. A. Heckl, S. Cenanovic, M. Goken, R.F. Singer, Metall. Mater. Trans. A 43A, 10–19 (2012)10.1007/s11661-011-0833-6 ↗
43. J. Meng, T. Jin, X. Sun, Z. Hu, Mater. Sci. Eng. 527, 6119–22 (2010)10.1016/j.msea.2010.04.071 ↗
44. Z. Yu, X. Ding, Y. Zheng, L. Cao, Q. Feng, MATEC Web Conf. 14, 11006 (2014)10.1051/matecconf/20141411006 ↗
45. N. D’Souza, S. Simmonds, G.D. West, H.B. Dong, Metall. Mater. Trans. A 44, 4764–73 (2013)10.1007/s11661-013-1816-6 ↗
46. W.S. Walston, K.S. O’Hara, E.W. Ross, T.M. Pollock, W.H. Murphy, Superalloys 1996 (Minerals, Metals & Materials Soc, Warrendale, 1996), pp. 27–34