Effect of Nickel Precoating on Wettability of Twinning-Induced Plasticity Steels by Liquid Zn-0.23 Wt Pct Al
Source abstract
Abstract
The effect of the nickel precoating on the wettability and the corresponding coating property of twinning-induced plasticity steel (17 wt pct Mn-1.2 wt pct Al-0.1 wt pct Si-0.5 wt pct C) by liquid Zn-0.23 wt pct Al were investigated. Annealing and Zn coating experiments were carried out in a galvanization simulator, and Zn wetting experiments were performed with a dispensed drop test machine. The experimental results showed that nickel precoating improved the Zn wetting property. SEM, XPS, and TEM analyses showed that nickel precoating decreased the thickness of surface oxides and thus improved the Zn coating property. It was speculated that oxygen adsorption on the nickel surface might be suppressed. In addition, Al2O3 was found just below the nickel precoating layer, and this indicated that the oxygen potential in the subsurface region was considerably decreased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A. R Marder: Mater. Sci., 2000, vol. 45, pp. 191–271.
2. J. Mahieu, S. Claessens and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–2908.10.1007/s11661-001-1042-5 ↗
3. D.J. Penney, J.H. Sullivan and D.A. Worsley: Corros. Sci., 2007, vol. 49, pp. 1321–1339.10.1016/j.corsci.2006.07.006 ↗
4. S. Prabhudev, S. Swaminathan and M. Rohwerder: Corros. Sci., 2011, vol. 53, pp. 2413.10.1016/j.corsci.2011.03.027 ↗
5. G.M. Song, T. Vystavel, N. van der Pers, J.Th.M. De Hosson and W.G. Sloof: Acta Mater., 2012, vol. 60, pp. 2973–2981.10.1016/j.actamat.2012.02.003 ↗
6. L. Cho, S.J Lee, M.S Kim, Y.H Kim and B.C De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 362–371.10.1007/s11661-012-1392-1 ↗
7. E.M. Bellhouse, A.I.M. Mertens and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 147-156.10.1016/j.msea.2006.09.117 ↗
8. R. Khondker, A. Mertens and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157-165.10.1016/j.msea.2006.09.116 ↗
9. E. M. Bellhouse and J. R. McDermid: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2753-2768.10.1007/s11661-011-0685-0 ↗
10. E. M. Bellhouse and J. R. McDermid: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2426-2441.10.1007/s11661-011-0983-6 ↗
11. M. Blumenau, M. Norden, J. Schulzc, F. Friedel and K. Peters: Sur. Coat. Tech., 2012, vol. 206, pp. 4194-4201.10.1016/j.surfcoat.2012.04.023 ↗
12. M. Blumenau, M. Norden, F. Friedel and K. Peters: Sur. Coat. Tech., 2010, vol. 205, pp. 828-834.10.1016/j.surfcoat.2010.07.123 ↗
13. S. Alibeigi, R. Kavitha, R.J. Meguerian and J. R. McDermid: Acta Mater., 2011, vol. 59 pp. 3537–3549.10.1016/j.actamat.2011.02.027 ↗
14. Y. Hirose, H. Togawa, J. Sumiya: Tetsu-to-Hagane, 1982, vol. 68, pp. 658-664.10.2355/tetsutohagane1955.68.6_658 ↗
15. L. Bordignon, Rev. Metall., 2007, vol. 104, pp. 300-307.10.1051/metal:2007119 ↗
16. N. Ebrill, Y. Durandet, L. Strezov: Metall. Mater. Trans. B, 2000, vol. 31, pp. 1069-107910.1007/s11663-000-0082-3 ↗
17. S. Shimada S, Y. Takada, J. Lee and T. Tanaka: ISIJ Int., 2008, vol. 48, pp. 1246-1250.10.2355/isijinternational.48.1246 ↗
18. Y. Takada, S. Shimada, J. Lee, M. Kurosaki, T, Tanaka: ISIJ Int., 2009, vol. 49, pp. 100-104.10.2355/isijinternational.49.100 ↗
19. J. Lee, J. Park, and S. H. Jeon: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 1035-1040.10.1007/s11663-009-9288-1 ↗
20. Y. Kim, M. Shin, C. Tang, and J. Lee: Metall. Mater. Trans. B, 2010, vol. 41, pp. 872-875.10.1007/s11663-010-9366-4 ↗
21. Y. Kim, J. Lee, J. Park, and S. H. Jeon: Met. Mater. Int., 2011, vol. 17, pp. 607-611.10.1007/s12540-011-0812-x ↗
22. Y. Kim, J. Lee, J. Park, S. H. Jeon, and K. G. Chin: J. Mater. Sci., 2012, vol. 47, pp. 8477-8482.10.1007/s10853-012-6737-z ↗
23. B.C. De Cooman, O. Kwon, and K.G. Chin: Mater. Sci. Tech- nol., 2012, vol. 28, pp. 513–527.10.1179/1743284711Y.0000000095 ↗
24. Y.G. Kim, J.M. Han, and J.S. Lee: Mater. Sci. Eng. A, 1989, vol. 114, pp. 51-59.10.1016/0921-5093(89)90844-7 ↗
25. O. Grassel, L. Kruger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
26. J.E. Jin and Y.K. Lee: Mater. Sci. Eng. A, 2009, vol. 527, pp. 157-161.10.1016/j.msea.2009.08.028 ↗
27. J.E. Jin and Y.K. Lee: Acta. Mater., 2012, vol. 60, pp. 1680-1688.10.1016/j.actamat.2011.12.004 ↗
28. M. Blumenau, M Norden, F. Friedel, K. Peters: Sur. Coat. Tech., 2011, vol. 206, pp. 559-567.10.1016/j.surfcoat.2011.07.088 ↗
29. L. Cho and B. C. De Cooman: Steel. Res. Int., 2012, vol. 83, pp. 391-397.10.1002/srin.201100296 ↗
30. Y. F. Gong and B. C. De Cooman: Steel. Res. Int., 2011, vol. 82, pp. 1310-1318.10.1002/srin.201100122 ↗
31. Y. Kim, J. Lee, J. Park, S.H. Jeon, and K.G. Chin: Mater. Char., 2014, vol. 89, pp. 138-145.10.1016/j.matchar.2014.01.012 ↗
32. Y. Kim, J. Lee, J. Park, S.H. Jeon and K.G. Chin: Corros. Sci., 2014, vol. 85, pp. 364-371.10.1016/j.corsci.2014.04.034 ↗
33. T. Iida and R. I. L. Guthrie: The Physical Properties of Liquid Metals, p. 134, Oxford University Press, New York, 1993.
34. J. Chastain and R. C. King Jr.: Handbook of X-ray Photoelectron Spectroscopy, p. 226, Physical Electronics, Minnesota, 1995.
35. G. Neumann and C. Tuijn: Self-Diffusion and Impurity Diffusion in Pure Metals: Handbook of Experimental Data, Elsevier, Great Britain, 2009, pp. 263, 267, 279, 282.
36. D. R. Gaskell, Introduction to the Thermodynamics of Materials, 4th ed., p. 582, Taylor & Francis, New York, 2003.
37. S. Frenznick, M. Stratmann, M Rohwerder: Rev. Sci. Instr., 2008, vol.79, pp. 043901-043909.10.1063/1.2901539 ↗
38. M. Giorgi, J. Guillot: J. Mater. Sci., 2005, vol. 40, pp. 2263-2268.10.1007/s10853-005-1944-5 ↗