Electrodeposition of Nanostructured Permalloy and Permalloy-Magnetite Composite Coatings and Investigation of Their Magnetic Properties
Source abstract
Abstract
Permalloy and permalloy-magnetite coatings were electrodeposited with the average thickness of 100 µm with certain operating parameters, such as the current density of 100 mA/cm2, pH 3.8, and the temperature of 298 K (25 °C), to fabricate alloy and composite coatings, respectively. The aim was to promote the magnetic properties of permalloy coating in order to extend its magnetic applications. For this purpose, nanocrystalline permalloy and permalloy-magnetite coatings were electrodeposited. The effect of the content of magnetite particles in the bath on magnetic properties of the samples was investigated. Vibrating sample magnetometry was performed to investigate the variation of magnetic properties of the coatings. The optimum amount of magnetite (2 g/L) was determined according to the highest amount of saturated magnetization and a sensible amount of coercivity. The morphology, phase, elemental analyses of the coatings and the chemical composition analysis of the bath were performed by scanning electron microscopy, X-ray diffraction pattern, quantometry, energy-dispersive X-ray spectroscopy, and ultraviolet–visible spectroscopy. The magnetization was increased initially and then decreased (after a limited amount of magnetite) by enhancing the content of magnetite particles in the bath. Also, the coercivity was decreased by increasing the amount of magnetite particles in the coatings, which was due to the reduction of the grain size of the permalloy matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metallurgical and Alloy Processes · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Horkans, J. Electrochem. Soc., 1979, Vol. 126, pp. 1861-1867.10.1149/1.2128816 ↗
2. W.C. Grande, J.C. Talbot, J. Electrochem. Soc., 1993, Vol. 140, pp. 669-674.10.1149/1.2056140 ↗
3. D.L. Grimmett, M. Schwartz, K. Nobe, J. Electrochem. Soc., 1990, Vol. 137, pp. 3414-3418.10.1149/1.2086231 ↗
4. J.B. Yi, X.p Li, J.Ding, H.L. Seet, J. Alloys Compd., 2007, Vol. 428, pp. 230-236.10.1016/j.jallcom.2006.01.105 ↗
5. M. Knobel, K.R. Pirota, J. Magn. Magn. Mater., 2002, Vol. 242–245, pp. 33–40.10.1016/S0304-8853(01)01180-5 ↗
6. P. Ripka, Sens. Actuators A, 1992, Vol. 33, pp. 129-141.10.1016/0924-4247(92)80159-Z ↗
7. Y. Zhang, G. Ding, Y. Cai, H. Wang, B. Cai, Mater. Charact, 2006, Vol. 57, pp. 121-126.10.1016/j.matchar.2005.12.016 ↗
8. W.P. Taylor, M. Schneider, H. Baltes, and M.G. Allen: International Conference on Solid-State Sensors and Actuators, Chicago, 1997, pp. 1445–48.
9. W.P. Taylor, O. Brand, M.G. Allen, J. Micro electro mech. Syst., 1998, Vol. 7, pp. 181-191.10.1109/84.679353 ↗
10. C.H. Ahn, Y.J. Kim, Y.J. Kim, and M.G. Allen: 7th International Conference Ion Solid-State Sensors and Actuators, Yokohama, Japan, 1993, pp. 70–73.
11. R.S. Beach, N. Smith, C.L. Platt, F. Jeffers, A.E. Berkowitz, Appl. Phys. Lett., 1996, Vol. 68, p. 2753.10.1063/1.115587 ↗
12. X.P. Li, Z.J. Zhao, T.B. Oh, H.L. Seet, B.H. Koh, Phys. Status Solidi (A), 2004, Vol. 201, pp. 1992-1995.10.1002/pssa.200304524 ↗
13. R. Alben, J.J. Becker, M.C. Chi, J. Appl. Phys., 1978, Vol. 49, p. 1653.10.1063/1.324881 ↗
14. G. Herzer, IEEE Trans. Magn., 1990, Vol. 26, pp. 1397-1402.10.1109/20.104389 ↗
15. H.L. Seet, X.P. Li, J.B. Yi, W.Y. Ooi, K.S. Lee, J. Alloys Compd., 2008, Vol. 449, pp. 284-287.10.1016/j.jallcom.2006.02.105 ↗
16. C.T.J. Low, R.G.A. Wills, F.C. Walsh, Surf. Coat. Technol, 2006, Vol. 201, pp. 371- 383.10.1016/j.surfcoat.2005.11.123 ↗
17. Z.J. Zhao, F. Bendjaballah, X.L. Yang, D.P. Yang, J. Magn. Magn. Mater, 2002, Vol. 246, pp. 62-66.10.1016/S0304-8853(02)00024-0 ↗
18. A.S. Antonov, N.A. Buznikov, A.B. Granovsky, I.T. Iakubov, A.F. Prokoshin, A.L. Rakhmanov, A.M. Yakunin, J. Magn. Magn. Mater, 2002, Vol. 249, pp. 315-318.10.1016/S0304-8853(02)00550-4 ↗
19. V.M. Prida, P. Gorria, G.V. Kurlyandskaya, M.L. Sanchez, B. Hernando, M. Tejedor, 2013, Vol. 14, pp. 231-238.
20. J.L. McCrea, G. Palumbo, G.D. Hibbard, U. Erb, Rev. Adv. Mater. Sci., 2013, Vol. 5, pp. 252-258.
21. S.A. CalbetÓ: Ph.D. Thesis, University of Universitàdegli Studi di Udine, 2011, SantGucat Del Valles, Italy.
22. A.A. Zuletaa, O.A. Galvisa, J.G. Castañoa, F. Echeverríaa, F.J. Bolivara, M.P. Hierrob, and F.J. Pérez-Trujillob: Surf. Coat. Technol., 2009, vol. 203, pp. 3569–78.
23. J. Lapinski, D. Pletcher, F.C. Walsh: Surf. Coat. Technol, 205(2011) 5205–5209.10.1016/j.surfcoat.2011.05.030 ↗
24. A. Hovestad, L. J. J. Janssen, Mod. Aspect Electroc., 2005, Vol. 38, pp. 475-532.10.1007/0-387-25838-8_6 ↗
25. S.A. Lajevardia, T. Shahrabia, J.A. Szpunar, Appl. Surf. Sci., 2013, Vol. 279, pp. 180-188.10.1016/j.apsusc.2013.04.067 ↗
26. C. Jakob, F. Erler, R. Nutsch, S. Steinha¨user, B. Wielage, and A. Zschunke: 15th Interfinish 2000 of the IUSF, Garmisch-Partenkirchen, Germany, 2000.
27. B. Pandeya, D. Dasb, A.K. Kar, Appl. Surf. Sci., 2015, Vol. 337, pp. 195–207.10.1016/j.apsusc.2015.02.092 ↗
28. A. Kaibia, A. Guittoumb, R.M. Öksüzoğluc, A.M. Yağcic, M. Boudissad, M. Kechouane, Appl. Surf. Sci., 2015 Vol. 350, pp. 50-56.10.1016/j.apsusc.2015.02.050 ↗
29. Q. Liua, X. Chena, J.Y. Zhanga, M.Yangb, X.J. Lia, S.L. Jianga, Y.W. Liua, Y. Caoa, Z.L. Wuc, C. Fenga, L. Dingd, G.H. Yua, Appl. Surf. Sci., 2015, Vol. 349, pp. 524–528.10.1016/j.apsusc.2015.05.050 ↗
30. T.R. Ohnstein, J.D. Zook, H.B. French, H. Guckel, T. Earles, J. Klein, and P. Mangat: Tunable IR Filters with Integral Electromagnetic Actuators, 1st ed., Proc. Solid State Sensor and Actuator Workshop, Hilton Head, South Carolina, 1996, pp. 196–99.10.31438/trf.hh1996.45 ↗
31. S.W. Park, D.G. Senesky, and A.P. Pisano: International Conference on Micro Electro Mechanical Systems, IEEE MEMS, Sorrento, Italy, 2009.
32. Y.T. Prabhu, K.V. Rao, V.S.S. Kumar, B.S. Kumari, WJNSE, 2014, Vol. 4, pp. 21-28.10.4236/wjnse.2014.41004 ↗
33. R. Abdel-Karim, Y. Reda, M. Muhammed, S. El-Raghy, M. Shoeib and H. Ahmed, JNM, 2011, Vol. 2011, pp. 1-8.
34. J. Ai, Y.Gao, G. Yang, F. Pan, Surf. Coat. Technol, 2007, Vol. 201, pp. 5988–5993.10.1016/j.surfcoat.2006.11.007 ↗
35. F Erler, C Jakob, H Romanus, L Spiess, B Wielage, T Lampke, S Steinhäuser, Electrochimica Acta, 2003, Vol. 48, pp. 3063–3070.10.1016/S0013-4686(03)00380-3 ↗
36. T. Kolonits, P. Jenei, B.G. Tóth, Z. Czigány, J. Gubicza, L. Péter, I. Bakonyi, J. Electrochem. Soc., 2016, Vol. 163, pp. 107-114.10.1149/2.0911603jes ↗
37. Z.L. Wang, Y. Liu, and Z. Zhang, Handbook of Nanophase and Nanostructured Materials-Materials Systems and Applications (I), 1st ed., Kluwer Academic/Plenum Publisher, New York, 2003, pp. 25,234.
38. L. Romankiw, M. Blakeslee, R. Acosta, Magnetics, 1978, Vol. 14, pp. 424-426.10.1109/TMAG.1978.1059894 ↗
39. J.M.D. Coey, Magnetism and magnetic materials, 1st ed., p. 300, Cambridge University Press, United Kingdom, 2010.10.1017/CBO9780511845000 ↗
40. G.C. Hadjipanayis, Magnetic storage systems beyond 2000, 1st ed., p. 599, Springer Netherlands, Manchester, 2001.10.1007/978-94-010-0624-8 ↗
41. D.J. Sellmyer and R. Skomski, Advanced Magnetic Nanostructures, 1st ed., Springer, New York, 2006, p. 185.10.1007/b101199 ↗
42. G. Herzer, Acta Mater., 2013, Vol. 61, pp. 718–734.10.1016/j.actamat.2012.10.040 ↗
43. K.H.J. Buschow, Concise Encyclopedia of Magnetic and Superconducting Materials, 2nd ed., p. 568, Elsevier Science, Netherlands, 2005.
44. L. Duò, M. Finazzi, F. Ciccacci, Magnetic Properties of Antiferromagnetic Oxide Materials, 1st ed., p. 282, Wiley-VCH, Germany, 2010.10.1002/9783527630370 ↗
45. G. Herzer, Mater Sci. Eng. A, 1991, Vol. 133, pp. 1-5.10.1016/0921-5093(91)90003-6 ↗