Numerical and Experimental Investigation of the Innovatory Incremental-Forming Process Dedicated to the Aerospace Industry
Source abstract
Abstract
Abstract The main goal of this work is development of the incremental-forming (IF) process for manufacturing integral elements applicable to the aerospace industry. A description of the proposed incremental-forming concept based on division of large die into a series of small anvils pressed into the material by a moving roll is presented within this article. A unique laboratory device has been developed to investigate the effects of process parameters on the material flow and the press loads. Additionally, a developed numerical model of this process with specific boundary conditions is also presented and validated to prove its predictive capabilities. However, main attention is placed on development of the process window. Thus, detailed investigation of the process parameters that can influence material behavior during plastic deformation, namely, roll size and roll frequency, is presented. Proper understanding of the material flow to improve the IF process, as well as press prototype, and to increase its technological readiness is the goal of this article. Results in the form of, e.g., strain distribution or recorded forging loads are presented and discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. T. Wiślicki: Technologia budowy płatowców. Wydawnictwa Naukowo Techniczne, Warszawa, 1964.
2. 2. J. Szyndler and L. Madej: Comput. Meth. Mater. Sci., 2015, vol. 15, p. 2.
3. 3. G. Hussain and L. Gao: Int. J. Mach. Tool. Manuf., 2007, vol. 47, pp. 419-35.10.1016/j.ijmachtools.2006.06.015 ↗
4. 4. H. Isekia and T. Naganawab: J. Mater. Process. Technol., 2002, vols. 130-1, pp. 675-9.10.1016/S0924-0136(02)00735-5 ↗
5. 5. G. Hussain, L. Gaoa, and N.U. Dar: J. Mater. Process. Technol., 2007, vol. 186, pp. 45-53.10.1016/j.jmatprotec.2006.12.005 ↗
6. 6. S.J. Yoon, and D.Y. Yangl: CIRP Annals – Manuf. Tech., 2005, vol. 54, pp. 221-4.10.1016/S0007-8506(07)60088-2 ↗
7. 7. L. Filicel, L. Fratin, and F. Micari: CIRP Annals – Manuf. Tech., 2002, vol. 51, no. 1, pp. 199-202.10.1016/S0007-8506(07)61499-1 ↗
8. 8. K. Muszka, L. Madej, and J. Majta: Mater. Sci. Eng. A, 2013, vol. 574, pp. 68-74.10.1016/j.msea.2013.03.024 ↗
9. 9. T.F. Stanistreet, J.M. Allwood, and A.M. Willoughby: J. Mater. Process. Technol., 2006, vol. 177, pp. 630-3.10.1016/j.jmatprotec.2006.03.228 ↗
10. 10. P. Groche, D. Fritsche, E.A. Tekkaya, J.M. Allwood, G. Hirt, and R. Neugebauer: CIRP Annals – Manuf. Tech., 2007, vol. 56, pp. 635-56.10.1016/j.cirp.2007.10.006 ↗
11. 11. C.C. Wong, T.A. Dean, and J. Lin: J. Mater. Process. Technol., 2004, vols. 153-4, pp. 60-6.10.1016/j.jmatprotec.2004.04.102 ↗
12. 12. Y. Jin and M. Murata: J. Mater. Process. Technol., 2004, vols. 155-6, pp. 1810-4.10.1016/j.jmatprotec.2004.04.357 ↗
13. 13. F. Grosman, L. Madej, S. Ziolkiewicz, and J. Nowak: J. Mater. Process. Technol., 2012, vol. 212, pp. 2200-9.10.1016/j.jmatprotec.2012.06.014 ↗
14. F. Grosman, K.J. Kurzydłowski, J. Pawlicki, and L. Tomecki: Patent No. 210904.
15. 15. J. Nowak, Ł. Madej, F. Grosman, and M. Pietrzyk: Mater. Sci. Forum, 2010, vols. 654-56, pp. 1622-5.10.4028/www.scientific.net/MSF.654-656.1622 ↗
16. 16. M. Tkocz and F. Grosman: Solid State Phenom., 2014, vol. 212, pp. 243-6.10.4028/www.scientific.net/SSP.212.243 ↗
17. 17. J.L. Chenot and F. Bay: Mat. Proc. Tech., 1998, vol. 80–81, pp. 8–15.10.1016/S0924-0136(98)00205-2 ↗
18. 18. J. Szyndler, L. Madej, and F. Grosman: J. Mach. Eng., 2014, vol. 14, no. 1, pp. 84-93.