Investigation of the Anisotropic Mechanical Behaviors of Copper Single Crystals Through Nanoindentation Modeling
Source abstract
Abstract
A crystal plasticity finite element method constitutive model was developed to investigate the anisotropic mechanical behaviors of (001), (011), and (111) initially orientated copper (Cu) single crystals during nanoindentation deformation. The numerical load-indentation depth curve and hardness-indentation depth curve were compared with experimental observations to validate the established three-dimensional (3D) CPFEM model. The difference of indentation loads between (111) crystal and (001) crystal is ~10.68 pct, and the difference of indentation modulus between (111) surface and (001) surface is ~10.80 pct. The numerical results show the noticeable indentation size effect for three crystals, and slightly different hardness values on different crystallographic planes. The equivalent plastic strain and lattice rotation angles were also analyzed on three through-thickness cross sections to study the plastic deformation-induced texture anisotropy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. D. Tabor, J I Met 1951, vol. 79, pp. 1-18.
2. W. C. Oliver and G. M. Pharr, Journal of Materials Research 1992, vol. 7, pp. 1564-1583.10.1557/JMR.1992.1564 ↗
3. Y. Wang, D. Raabe, C. Kluber and F. Roters, Acta Materialia 2004, vol. 52, pp. 2229-2238.10.1016/j.actamat.2004.01.016 ↗
4. D. G. Flom and R. Komanduri, Wear 2002, vol. 252, pp. 401-429.10.1016/S0043-1648(01)00879-1 ↗
5. J. D. Kiely and J. E. Houston, Phys Rev B 1998, vol. 57, pp. 12588-12594.10.1103/PhysRevB.57.12588 ↗
6. A. K. Bhattacharya and W. D. Nix, Int J Solids Struct 1988, vol. 24, pp. 881-891.10.1016/0020-7683(88)90039-X ↗
7. J. L. Bassani and T. Y. Wu, P Roy Soc Lond a Mat 1991, vol. 435, pp. 21-41.10.1098/rspa.1991.0128 ↗
8. O. Casals, J. Ocenasek and J. Alcala, Acta Mater 2007, vol. 55, pp. 55-68.10.1016/j.actamat.2006.07.018 ↗
9. J. Alcala, O. Casals and J. Ocenasek, J Mech Phys Solids 2010, vol. 58, pp. 751-751.10.1016/j.jmps.2010.02.006 ↗
10. A. F. Gerday, M. Ben Bettaieb, L. Duchêne, N. Clément, H. Diarra and A. M. Habraken, Acta Materialia 2009, vol. 57, pp. 5186-5195.10.1016/j.actamat.2009.07.020 ↗
11. Y. X. Gan, X. Chen and M. H. Zhao, J Mech Mater Struct 2008, vol. 3, pp. 1429-1445.10.2140/jomms.2008.3.1429 ↗
12. M. Liu, C. Lu, K. A. Tieu and K. Zhou, J Mater Res 2015, vol. 30, pp. 2485-2499.10.1557/jmr.2015.223 ↗
13. M. Liu, C. Lu, K. A. Tieu, C. T. Peng and C. Kong, Sci Rep-Uk 2015, vol. 5.10.1038/srep15072 ↗
14. M. Knezevic, B. Drach, M. Ardeljan and I. J. Beyerlein, Comput Method Appl M 2014, vol. 277, pp. 239-259.10.1016/j.cma.2014.05.003 ↗
15. M. Ardeljan, M. Knezevic, T. Nizolek, I. J. Beyerlein, N. A. Mara and T. M. Pollock, Int J Plasticity 2015, vol. 74, pp. 35-57.10.1016/j.ijplas.2015.06.003 ↗
16. M. Liu, C. Lu, A. K. Tieu and G. Y. Y. Deng, Steel Res Int 2013, vol. 84, pp. 1196-1202.10.1002/srin.201300011 ↗
17. G. Y. Deng, A. K. Tieu, L. Y. Si, L. H. Su, C. Lu, H. Wang, M. Liu, H. T. Zhu and X. H. Liu, Comp Mater Sci 2014, vol. 81, pp. 2-9.10.1016/j.commatsci.2013.06.054 ↗
18. G. Y. Deng, C. Lu, L. H. Su, A. K. Tieu, J. T. Li, M. Liu, H. T. Zhu and X. H. Liu, Comp Mater Sci 2014, vol. 81, pp. 79-88.10.1016/j.commatsci.2013.07.006 ↗
19. M. Liu, A. K. Tieu, C. Lu, H. T. Zhu and G. Y. Deng, Comp Mater Sci 2014, vol. 81, pp. 30-38.10.1016/j.commatsci.2013.05.030 ↗
20. M. Liu, C. Lu, K. Tieu and H. L. Yu, Mat Sci Eng a-Struct 2014, vol. 619, pp. 57-65.10.1016/j.msea.2014.09.034 ↗
21. M. Liu, C. Lu and A. K. Tieu, Int J Solids Struct 2015, vol. 54, pp. 42-49.10.1016/j.ijsolstr.2014.11.008 ↗
22. R. J. Asaro and J. R. Rice, Journal of the Mechanics and Physics of Solids 1977, vol. 25, pp. 309-338.10.1016/0022-5096(77)90001-1 ↗
23. R. J. Asaro, Jom-J Min Met Mat S 1983, vol. 35, pp. A28-A28.
24. R. J. Asaro and A. Needleman, Acta Metall Mater 1985, vol. 33, pp. 923-953.10.1016/0001-6160(85)90188-9 ↗
25. D. Peirce, R. J. Asaro and A. Needleman, Acta Metallurgica 1982, vol. 30, pp. 1087-1119.10.1016/0001-6160(82)90005-0 ↗
26. G. I. Taylor, journal of the Institute of Metals 1938, vol. 62, pp. 307-324.
27. R Hill, Journal of the Mechanics and Physics of Solids 1966, vol. 14, pp. 95-102.10.1016/0022-5096(66)90040-8 ↗
28. R. J. Asaro, J Appl Mech-T Asme 1983, vol. 50, pp. 921-934.10.1115/1.3167205 ↗
29. Y.G. Huang: Harvard University, 1991.
30. C. Lu, G. Y. Deng, A. K. Tieu, L. H. Su, H. T. Zhu and X. H. Liu, Acta Mater 2011, vol. 59, pp. 3581-3592.10.1016/j.actamat.2011.02.031 ↗
31. D. Peirce, R. J. Asaro and A. Needleman, Acta Metall Mater 1983, vol. 31, pp. 1951-1976.10.1016/0001-6160(83)90014-7 ↗
32. M. Liu, C. Lu and K. A. Tieu, In TMS Annual Meeting, (2014), pp 317-337.
33. Y. G. Wei, X. Z. Wang and M. H. Zhao, J Mater Res 2004, vol. 19, pp. 208-217.10.1557/jmr.2004.19.1.208 ↗
34. Y. Liu, B. Wang, M. Yoshino, S. Roy, H. Lu and R. Komanduri, J Mech Phys Solids 2005, vol. 53, pp. 2718-2741.10.1016/j.jmps.2005.07.003 ↗
35. T. Y. Wu, J. L. Bassani and C. Laird, P Roy Soc Lond a Mat 1991, vol. 435, pp. 1-19.10.1098/rspa.1991.0127 ↗
36. J. Alcala, O. Casals and J. Ocenasek, J Mech Phys Solids 2008, vol. 56, pp. 3277-3303.10.1016/j.jmps.2008.07.004 ↗
37. K. W. McElhaney, J. J. Vlassak and W. D. Nix, J Mater Res 1998, vol. 13, pp. 1300-1306.10.1557/JMR.1998.0185 ↗
38. G. Z. Voyiadjis and R. Peters, Acta Mech 2010, vol. 211, pp. 131-153.10.1007/s00707-009-0222-z ↗
39. W. Wang and K. Lu, Philos Mag 2006, vol. 86, pp. 5309-5320.10.1080/14786430600838296 ↗
40. W. Wang and K. Lu, J Mater Res 2002, vol. 17, pp. 2314-2320.10.1557/JMR.2002.0339 ↗
41. T. Inamura, H. Hosoda, K. Wakashima and S. Miyazaki, Mater Trans 2005, vol. 46, pp. 1597-1603.10.2320/matertrans.46.1597 ↗
42. J. J. Vlassak and W. D. Nix, Philos Mag A 1993, vol. 67, pp. 1045-1056.10.1080/01418619308224756 ↗
43. J. J. Vlassak and W. D. Nix, Journal of the Mechanics and Physics of Solids 1994, vol. 42, pp. 1223-1245.10.1016/0022-5096(94)90033-7 ↗
44. J. A. Wert, Q. Liu and N. Hansen, Acta Mater 1997, vol. 45, pp. 2565-2576.10.1016/S1359-6454(96)00348-5 ↗