journal article·2015-03

Al-TiC Composites Fabricated by a Thermally Activated Reaction Process in an Al Melt Using Al-Ti-C-CuO Powder Mixtures: Part II. Microstructure Control and Mechanical Properties

Young-Hee Cho, Jung-Moo Lee, Su-Hyeon Kim

Publisher page

Abstract

Controlling the processing parameters is important to minimize such undesirable microstructural features in Al/TiC composites as unreacted C, incomplete reaction products of Al3Ti and TiC aggregates, which originate from the pellet microstructure upon the combustion reaction of an Al-Ti-C-CuO pellet in an Al melt. In particular, the mean particle size of elemental powders is a key factor linked to the formation of TiC aggregates, which is significantly suppressed with smaller initial particles of Ti and C by mixing them homogenously by ball milling. Al-Cu-Mg alloys reinforced with up to 12 vol pct TiC are fabricated by the developed process, followed by extrusion. The composites after heat treatment exhibit high elastic modulus and an ultimate tensile strength of 93 GPa and 461 MPa, respectively, with a low coefficient of thermal expansion of 17.11 ppm/K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. P. Sahoo and M.J. Koczak, Mater. Sci. Eng., A 1991, vol. A131, pp. 69-76.10.1016/0921-5093(91)90345-N ↗
2. R. Mitra, W.A. Chiou, M.E. Fine and J.R. Weertman, J. Mater. Res. 1993, vol. 8, pp. 2380-2392.10.1557/JMR.1993.2380 ↗
3. H. Nakata, T. Choh and N. Kanetake, J. Mater. Sci. 1995, vol. 30, pp. 1719-1727.10.1007/BF00351601 ↗
4. X.C. Tong and H.S. Fang, Metall. Mater. Trans. A 1998, vol. 29A, pp. 893-902.10.1007/s11661-998-0279-7 ↗
5. X.C. Tong and A.K. Chosh, J. Mater. Sci. 2001, vol. 36, pp. 4059-4069.10.1023/A:1017946927566 ↗
6. Y.F. Liang, J.E. Zhou and S.Q. Dong, Mater. Sci. Eng., A 2010, vol. 527, pp. 7955-7960.10.1016/j.msea.2010.08.098 ↗
7. I. Gotman, M.J. Koczak and E. Shtessel, Mater. Sci. Eng., A 1994, vol. A187, pp. 189-199.10.1016/0921-5093(94)90347-6 ↗
8. W.-C. Lee and S.-L. Chung, J. Am. Ceram. Soc. 1997, vol. 80, pp. 53-61.10.1111/j.1151-2916.1997.tb02790.x ↗
9. M.S. Song, M.X. Zhang, S.G. Zhang, B. Huang and J.G. Li, Mater. Sci. Eng., A 2008, vol. 473, pp. 166-171.10.1016/j.msea.2007.03.086 ↗
10. X.C. Tong and H.S. Fang, Metall. Mater. Trans. A 1998, vol. 29A, pp. 875-891.10.1007/s11661-998-0278-8 ↗
11. W.H. Jiang, G.H. Song, X.L. Han, C.L. He and H.C. Ru, Mater. Lett. 1997, vol. 32, pp. 63-65.10.1016/S0167-577X(97)00011-6 ↗
12. Y.-H. Cho, J.-M. Lee, H.-J. Kim, J.-J. Kim, and S.-H. Kim: Proceedings of the 13th International Conference on Aluminum Alloys 2012, pp. 201–06.10.1002/9781118495292.ch31 ↗
13. Y.-H. Cho, J.-M. Lee, H.-J. Kim, J.-J. Kim and S.-H. Kim, Met. Mater. Int. 2012, vol. 19, pp. 1-8.10.1007/s12613-012-0507-4 ↗
14. Y.H. Cho, J.M. Lee, and S.H. Kim: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5667–78.10.1007/s11661-014-2476-x ↗
15. S.-H. Kim, Y.-H. Cho and J.-M. Lee, Metall. Mater. Trans. A 2014, vol. 45, pp. 2873-2884.10.1007/s11661-014-2224-2 ↗
16. P. Li, E.G. Kandalova and V.I. Nikitin, Mater. Lett. 2005, vol. 59, pp. 2545-2548.10.1016/j.matlet.2005.03.043 ↗
17. J.J. Moore and H.J. Feng, Prog. Mater. Sci. 1995, vol. 39, pp. 243-273.10.1016/0079-6425(94)00011-5 ↗
18. C.R. Bowen and B. Derby, J. Mater. Sci. 1996, vol. 31, pp. 3791-3803.10.1007/BF00352794 ↗
19. I.-H. Song, D.K. Kim, Y.-D. Hahn and H.-D. Kim, Scripta Mater. 2003, vol. 48, pp. 413-418.10.1016/S1359-6462(02)00435-9 ↗
20. P. Li, E.G. Kandalova, V.I. Nikitin, A.G. Makarenko, A.R. Luts and Y. Zhang, Scripta Mater. 2003, vol. 49, pp. 699-703.10.1016/S1359-6462(03)00402-0 ↗
21. Z. Liu, Q. Han and J. Li, Composites: Part B 2012, vol. 43, pp. 2429-2433.10.1016/j.compositesb.2011.11.004 ↗
22. H.-C. Shih, N.-J. Ho and J.C. Huang, Metall. Mater. Trans. A 1996, vol. 27A, pp. 2479-2494.10.1007/BF02652342 ↗
23. G. Xiao, Q. Fan, M. Gu and Z. Jin, Mater. Sci. Eng., A 2006, vol. 425, pp. 318-325.10.1016/j.msea.2006.03.076 ↗
24. B. Liu, X. Liu, M. Liu and Z. Zhao, Mater. Manuf. Processes 2011, vol. 26, pp. 1339-1345.10.1080/10426914.2010.537420 ↗
25. J. Zhang, J.-M. Lee, Y.-H. Cho, S.-H. Kim and H. Yu, Scripta Mater. 2013, vol. 69, pp. 45-48.10.1016/j.scriptamat.2013.03.012 ↗
26. D.J. Lloyd, Int. Mater. Rev. 1994, vol. 39, pp. 1-23.10.1179/imr.1994.39.1.1 ↗
27. J.C. Halpin and J.L. Kardos, Polym. Eng. Sci. 1976, vol. 16, pp. 344-352.10.1002/pen.760160512 ↗
28. Z. Hashin and S. Shtrikman, J. Mech. Phys. Solids 1963, vol. 11, pp. 127-140.10.1016/0022-5096(63)90060-7 ↗
29. V.C. Nardone and K.M. Prewo, Scripta Metall. 1986, vol. 20, pp. 43-48.10.1016/0036-9748(86)90210-3 ↗
30. V.C. Nardone, Scripta Metall. 1987, vol. 21, pp. 1313-1318.10.1016/0036-9748(87)90105-0 ↗
31. M. Taya and R.J. Arsenault, Scripta Metall. 1987, vol. 21, pp. 349-354.10.1016/0036-9748(87)90227-4 ↗
32. R.M. Aikin Jr. and L. Christodoulou, Scripta Metall. Mater. 1991, vol. 25, pp. 9-14.10.1016/0956-716X(91)90345-2 ↗
33. W.J. Kim, S.I. Hong, J.M. Lee and S.H. Kim, Mater. Sci. Eng., A 2013, vol. 559, pp. 325-332.10.1016/j.msea.2012.08.106 ↗
34. M.F. Ashby, Philos. Mag. 1970, vol. 21, pp. 399-424.10.1080/14786437008238426 ↗
35. L.C. Davis and J.E. Allison, Metall. Trans. A 1993, vol. 24A, pp. 2487-2496.10.1007/BF02646527 ↗
36. R.J. Arsenault and N. Shi, Materials Science and Engineering 1986, vol. 81, pp. 175-187.10.1016/0025-5416(86)90261-2 ↗
37. M. Taya, K.E. Lulay and D.J. Lloyd, Acta Metall. Mater. 1991, vol. 39, pp. 73-87.10.1016/0956-7151(91)90329-Y ↗
38. J.-M. Lee, S.-B. Kang, T. Sato, H. Tezuka and A. Kamio, Mater. Trans., JIM 2002, vol. 43, pp. 2487-2493.10.2320/matertrans.43.2487 ↗
39. J.W. Martin: Micromechanisms in particle-hardened alloys, 1st ed., Cambridege University Press, Cambridge, 1980, pp. 60-62.
40. G. Le Roy, J.D. Embury, G. Edward and M.F. Ashby, Acta Metall. 1981, vol. 29, pp. 1509-1522.10.1016/0001-6160(81)90185-1 ↗
41. J.R. Davis: ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International, Materials Park, OH, 1993, pp. 651-653